Catalog

Showing 1-36 of 688 item(s)

A06B-6055-H322 - Drive - FANUC

A06B-6055-H322

This FANUC 6055 Series and A06B-6055-H322 spindle drive is designed to control FANUC 50P motors. This 3-axis variator is complete, internal radiation type, 4500 rpm This A06B-6055-H322 drive is at your disposal to replace your defective hardware and has a warranty adapted to your needs.

€3,980.00

JZNC-XPP02B - Teach Pendant - YASKAWA

JZNC-XPP02B

This Teach Pendant YASKAWA and reference JZNC-XPP02B is used for the robots XRC MOTOMAN / Yasnac Easy multi-language interface and high performance thanks to its RISC processor. This Teach Pendant YASKAWA is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€2,100.00

On sale!

A06B-6079-H106 - Servo Amplifier Module - FANUC

A06B-6079-H106

This FANUC Axis Drive A06B-6079-H106, FANUC Servo Amplifier Module Alpha SVM1-130 is designed for FANUC Alpha 22 motors. Fanuc Alpha SVM1-130 Servo Amplifier. Single Axis Type A/B Interface Alpha Module. Input 283– 325 Volt / 9,1 kW. Output 52,2A This A06B-6079-H106 axis drive is at your disposal to replace your defective equipment and has a guarantee of...

€1,075.00

A02B-0281-C125 MBS - System Operation Keyboard - FANUC

A02B-0281-C125 MBS

€290.00

A06B-6105-H003 - Servo Amplifier - FANUC

A06B-6105-H003

6-axis drive for F-200iB/M-6iB/ArcMate 100iB robot (or other compatible model). KUKA, ABB... Input : 200-240V 1,5kW. Output : 6x13AIncludes a 6-axis A16B-2000-0063/06C power board, and a servo control board A16B-3200-0440/04CThis A06B-6105-H003 drive is at your disposal to replace your defective hardware and has a warranty adapted to your needs.

€3,420.00

A16B-2201-0101 - Memory Card- FANUC

A16B-2201-0101

This FANUC A16B-2201-0101 memory card is at your disposal. Memory card for FANUC 0 series C and D series digital controllers for serial pins. Card with fiber optic connector. This Fanuc A16B-2201-0101 memory card comes with a warranty.

€850.00

JUSP-WS30AB - Amplifier - YASKAWA

JUSP-WS30AB

This JUSP-WS30AB and YASKAWA drive is a controller for XRC robot control unit. 2,2 kW Amplifier for Servopack CACR-SK45AAB and CACR-SK16MAAB. This JUSP-WS30AB YASKAWA drive is at your disposal to replace your defective equipment and has a warranty adapted to your needs.

€950.00

JANCD-XEW01-1 - Control board - YASKAWA

JANCD-XEW01-1

This control board JANCD-XEW01-1 and brand YASKAWA is a control board for XRC robot control unit. XEW01-01: Analog output x 3 ports + Status signal Input of a welder This JANCD-XEW01-1 YASKAWA card is at your disposal to replace your defective hardware and has a warranty adapted to your needs.

€370.00

JANCD-MFB01-1 - Control board - YASKAWA

JANCD-MFB01-1

This interface board JANCD-MFB01-1 and YASKAWA is an interface board for XRC robot control unit. Fieldbus system via standard AnyBus modules This JANCD-MFB01-1 YASKAWA interface board is available to replace your defective equipment and has a guarantee adapted to your needs.

€640.00

JARCR-XEB01-1 - Backboard Card - YASKAWA

JARCR-XEB01-1

This expansion card JANCD-XEB01-1 and brand YASKAWA is an expansion card for XRC robot control unit. Backboard card for JANCD-MFB01 This JANCD-XEB01-1 YASKAWA card is at your disposal to replace your defective hardware and has a warranty adapted to your needs.

€380.00

JZRCR-XSU02 - Servo Controller - YASKAWA

JZRCR-XSU02

This drive JZRCR-XSU02 and YASKAWA is a drive for XRC robot control unit. For type: SV3X, UP6, S16X, UP20, UP50, UP20M, SK45X, SK16MX, SP70X .. This YASKAWA JZRCR-XSU02 drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€640.00

On sale!

JZRCR-XC001 - Servo Controller - YASKAWA

JZRCR-XC001

This JZRCR-XC001 and YASKAWA drive is a servo controller for XRC robot control unit. For type: SK45X, UP50, SK16MX, UP6, SK16X, UP20, UP130, UP165, UP200 This JZRCR-XC001 YASKAWA Servo controller is at your disposal to replace your defective equipment and has a warranty adapted to your needs.

€960.00

CIMR-VC4A0002BAA - Drive Speed Controller- YASKAWA

CIMR-VC4A0002BAA

Inverter YASKAWA reference CIMR-VC4A0002BAA. Range V1000. Specifications : 0.4kW/0.75kW 400V 3ph - AC Inverter Drive Speed Controller, Unfiltered. This CIMR-VC4A0002BAA is at your disposal to replace your defective material and has a warranty adapted to your needs. AC inverter tested on engine test bench.

€380.00

A05B-2301-C332 - Teach Pendant - FANUC

A05B-2301-C332

This Fanuc branded reference box A05B-2301-C332 is at your disposal. This Teach Pendant, for Robot FANUC working with controller R-J3, makes possible the programming and all the control operations and others of the robots FANUC. This FANUC teach reconditioned and tested on FANUC robot.

€1,740.00

A05B-2400-C900 - Cooling Unit - FANUC

A05B-2400-C900

This Fanuc cooling unit of reference A05B-2400-C900 is at your disposal. This unit is used for FANUC Robot running with R-J3 controller, Cooling unit reconditioned and tested on FANUC robot.

€230.00

CACR-UP6AAC - Servopack - YASKAWA

CACR-UP6AAC

This YASKAWA reference servopack CACR-UP6AAC is a servopack for YASNAC ERCR-UP6-RB04, RB05, RB10. Inverter consisting of JUSP-ACP05JAA (converter), JUSP-WS05AAY17, JUSP-WS10AAY17, JUSP-WS05AAY17, JUSP-WS01AA (in R, B and T), JASP-WRCA01 power supply board JUSP-RCP01XXX. This servopack CACR-UP6AAC is at your disposal to replace your defective equipment.

€2,520.00

JUSP-ACP05JAB - Converter - YASKAWA

JUSP-ACP05JAB

This YASKAWA converter is composed of 2 modules: JUSP-ACP05JAB. It is used in CACR-SV3AAA servopacks, CACR-UP6AAC, CACR-SK16AAC, CACR-UP20AAA. Capacity of 5A. This YASKAWA converter is at your disposal to replace your defective equipment. It is sold with a guarantee of operation adapted to your needs.

€1,180.00

On sale!

A06B-6077-H111 - Power Supply - FANUC

A06B-6077-H111

This power supply A06B-6077-H111 Alpha Fanuc is at your disposal. Fanuc PSM-11 range, category: Alpha Power Supply.This Alpha Fanuc A06B-6077-H111 power supply comes with a warranty.Refurbished and fully loaded power supply (time test) on FANUC bench.

€790.00

A20B-1000-0852 - Graphic Board - FANUC

A20B-1000-0852

This FANUC brand graphic board A020B-1000-0852 for sale in exchange or standard. Video card A020B-1000-0852 reconditioned and tested under full load (duration test) on Fanuc 10 and 11 bench. This A020B-1000-0852 video card comes with a warranty.

€530.00

A06B-6096-H105 - Servo Amplifier Module - FANUC

A06B-6096-H105

This FANUC servo amplifier series 6096 and reference A06B-6096-H105 is an AC type drive. SVM1-80 series. Input : 283-325V, 4,75kW. - Nominal output 230V ~ 18,7AThis A06B-6096-H105 drive is at your disposal to replace your defective hardware and has a warranty adapted to your needs.Module reconditioned and tested under full load (duration test) on FANUC...

€1,770.00

On sale!

A06B-6079-H206 - Servo Amplifier Module - FANUC

A06B-6079-H206

This FANUC 2-axis and reference A06B-6079-H206 is available to replace your equipment. SVM2-40/40 Input: 283-325V, Output: 5.3 kW, Output 230v ~ 12.5A / 12.5A This A06B-6079-H206 drive is at your disposal to replace your defective hardware and has a warranty adapted to your needs. Module reconditioned and tested under full load (duration test) on FANUC...

€1,310.00

BT20/002280 - Operator Terminal - SUTRON/BOSCH

BT20/002280

This operator terminal SUTRON reference BT20/002280 belongs to the BT20 range. TesiMod BT20 reconditioned and thoroughly tested. This operator terminal BOSCH/SUTRON is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€620.00

A16B-3200-0450 - CPU Board - FANUC

A16B-3200-0450/07G

This FANUC CPU board reference A16B-3200-0450/07G is designed to equip FANUC robots. This CPU LR-Mate card is used to integrate the CPU module, the axis card and the From/Sram module. This card A16B-3200-0450 is at your disposal to replace your defective equipment and has a guarantee of operation adapted to your needs.

€540.00

JUSP-WSCA01AA + JUSP-WSCB01AA - Amplifier - YASKAWA

JUSP-WSCA01AA + JUSP-WSCB01AA

This amplifier JUSP-WSCA01AA + JUSP-WSCB01AA and YASKAWA is a amplifier for XRC robot control unit. 100W Amplifier for Servopack CACR-UP6AAC, CACR-SV3AAA This amplifier JUSP-WSCA01AA + JUSP-WSCB01AA is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€320.00

JUSP-WSCB05AA + JUSP-WSCA05AA + JUSP-WSCD05AA - Amplifier - YASKAWA

JUSP-WSCB05AA+WSCA05AA+WSCD05AA

This amplifier JUSP-WSCB05AA + JUSP-WSCA05AA + JUSP-WSCD05AA and YASKAWA brand is a drive for XRC robot control unit. 500W Amplifier for Servopack CACR-UP6AAC, CACR-SV3AAA This amplifier JUSP-WSCB05AA + JUSP-WSCA05AA + JUSP-WSCD05AA is at your disposal to replace your defective hardware.

€310.00

JUSP-WSCD10AA+JUSP-WSCA10AA+JUSP-WSCB10AA - Amplifier - YASKAWA

JUSP-WSCD10AA+WSCA10AA+WSCB10AA

This amplifier JUSP-WSCD10AA+JUSP-WSCA10AA+JUSP-WSCB10AA and YASKAWA brand is a drive for XRC robot control unit. 1kW Amplifier for Servopack CACR-UP6AAC, CACR-SV3AAA This amplifier JUSP-WSCD10AA+JUSP-WSCA10AA+JUSP-WSCB10AA is at your disposal to replace your defective hardware.

€640.00

JUSP-WSCB05AA + JUSP-WSCB05AA + JUSP-WSCD10AA - Amplifier - YASKAWA

JUSP-WSCB05AA+WSCB05AA+WSCD10AA

This amplifier JUSP-WSCB05AA + JUSP-WSCB05AA + JUSP-WSCD10AA and YASKAWA brand is a drive for XRC robot control unit. 500W Amplifier for Servopack CACR-UP6AAC, CACR-SV3AAA This amplifier JUSP-WSCB05AA + JUSP-WSCB05AA + JUSP-WSCD10AA is at your disposal to replace your defective hardware.

€410.00

JUSP-ACPA05JAA + JUSP-ACPCB05JAA - Converter - YASKAWA

JUSP-ACPA05JAA + JUSP-ACPCB05JAA

This YASKAWA converter is composed of 2 modules: JUSP-ACPA05JAA + JUSP-ACPCB05JAA. It is used in CACR-SV3AAA servopacks, CACR-UP6AAC, CACR-SK16AAC, CACR-UP20AAA. Capacity of 5A. This YASKAWA converter is at your disposal to replace your defective equipment. It is sold with a guarantee of operation adapted to your needs.

€920.00

JUSP-RCP01AAC - Power Supply Module - YASKAWA

JUSP-RCP01AAC

This YASKAWA power supply module is reference JUSP-RCP01AAC. It is used several YASKAWA servopacks. This power supply module generates a DC power supply (+ 5V, + 7V, ± 15V) for servo control. The AC input (single phase: 200/220 VAC) is provided by the power supply. This YASKAWA module is at your disposal to replace your defective equipment.

€420.00

JANCD-XCP01-1 - CPU Control Board - YASKAWA

JANCD-XCP01-1

YASKAWA CPU and reference card JANCD-XCP01-1 is used with the XRC MOTOMAN controller. Includes JANCD-XIF03-1 and JANCD-XMM01-2 cards This CPU JANCD-XCP01-1 is at your disposal to replace your defective equipment and has a guarantee of operation adapted to your needs.

€1,050.00

CPS-150F - Power Supply - YASKAWA

CPS-150F

This YASKAWA/YASNAC CN05 and CPS-150F Power Supply is used for the NX100 and XRC MOTOMAN series. Input voltage - 200-230 V AC, frequency - 50/60 Hz, current - 2.1 A This CPS-150F power supply is at your disposal to replace your defective equipment and has a guarantee of operation adapted to your needs.

€940.00

JZNC-XRK01B-1 - CPU Rack - YASKAWA

JZNC-XRK01B-1

This JZNC-XRK01B-1 reference and YASKAWA brand rack is for YASNAC XRC. The CPU Rack (JZNC-XRK01X-X) does not include any cards. BLANK RACK. This rack JZNC-XRK01B-1 is at your disposal to replace your defective equipment and has a guarantee of operation adapted to your needs.

€290.00

On sale!

S30A-4011CA - Laser Scanner - SICK

S30A-4011CA

This S3000 series laser scanner has four protection fields and four servo fields that are freely programmable using your SICK software. You can therefore configure your laser scanner according to the conditions of your installation. This SICK S30A-4011CA scanner is at your disposal to replace your defective equipment.

€2,585.00

A03B-0815-C001 - I/O Module - FANUC

A03B-0815-C001

This reference I/O module A03B-0815-C001 and brand FANUC is a module of type 2 (24 inputs, 16 outputs) to connect your panel FANUC. It is composed of 5 connectors: JD1B, JD1A, CA101, JA3 and CB161. This FANUC module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€250.00

A16B-2203-0370 - Power Supply Unit - FANUC

A16B-2203-0370

This FANUC power supply board is part number A16B-2203-0370. It is installed on FANUC RJ3 Robot. This FANUC card is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Card reconditioned and tested on bench manufacturer (Test 100%).

€410.00

A16B-3200-0330 - CPU Board - FANUC

A16B-3200-0330

This FANUC CPU board is part number A16B-3200-0330. It is installed on FANUC RJ3 Robot. This CPU card is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Card reconditioned and tested on bench manufacturer (Test 100%).

€400.00