A06B-6055-H322 - Drive - FANUC
This FANUC 6055 Series and A06B-6055-H322 spindle drive is designed to control FANUC 50P motors.
This 3-axis variator is complete, internal radiation type, 4500 rpm
This A06B-6055-H322 drive is at your disposal to replace your defective hardware and has a warranty adapted to your needs.
The AC spindle motor P series is suitable for structural rationalization by eliminating the machine spindle gear box.
1) As the rated output range is wide at 1:8, a gear box structure for speed change is not required, thereby allowing the structure of the machine to be simplified. Accordingly, vibration and noise caused by the gear box structure is also eliminated.
2) Improvement in efficiency of construction equipment. In the conventional motor, it was necessary to stop the spindle when switching the gear to change the speed. However, the P series AC spindle motor reduces unnecessary use of time, other than that needed for machining, to a minimum by eliminating gear switching.
3) Despite a compact configuration, a large low-speed torque can be obtained.
4) Similar to the standard series, the method of fan exhaust can be selected from either a exhaust front type or exhaust rear type, thus preventing heat deformation of the machine.
FANUC is a Japanese manufacturer of industrial robots, machining centers and numerical controls for machine tools
Since its creation in 1956, when the company’s founder, Dr. Seiuemon Inaba, introduced the concept of digital controls, FANUC has always been at the forefront of manufacturing techniques in the world. Moving from the automation of a single machine in the late 1950s to the automation of entire production lines over the following decades.