Leave us a message.


Sorry, we are not available at the moment. Send us a message and we will get back to you soon.

Leave us a message.
  • On sale!
A06B-6077-H111 - Power Supply - FANUC
A06B-6077-H111 - Power Supply - FANUC
A06B-6077-H111 - Power Supply - FANUC
A06B-6077-H111 - Power Supply - FANUC
A06B-6077-H111 - Power Supply - FANUC
A06B-6077-H111 - Power Supply - FANUC
A06B-6077-H111 - Power Supply - FANUC
A06B-6077-H111 - Power Supply - FANUC
A06B-6077-H111 - Power Supply - FANUC
A06B-6077-H111 - Power Supply - FANUC

A06B-6077-H111 - Power Supply - FANUC

A06B-6077-H111
This power supply A06B-6077-H111 Alpha Fanuc is at your disposal. Fanuc PSM-11 range, category: Alpha Power Supply.

This Alpha Fanuc A06B-6077-H111 power supply comes with a warranty.

Refurbished and fully loaded power supply (time test) on FANUC bench.
In stock, ready to ship.
State
  • Refurbished Service Exchange
  • Refurbished Supply
Warranty
€790.00
VAT excluded

System options

Exchange service with a refurbished unit

Standard Exchange Service

Reconditioned and tested systems

From 6 to 12
month warranty

Exchange service with a new unit

Standard Exchange Service

New systems

From 12 to 24
month warranty

Supply of a refurbished unit

Supply Service

Reconditioned and tested systems

From 6 to 12
month warranty

Supply of a new unit

Supply Service

New systems

From 12 to 24
month warranty

For parts only

Supply Service

Sold for parts – no warranty

Repair

Repair service

Repair will be made to damaged and defectiv units

From 3 to 18
month warranty

Livraison rapide

Fast
delivery

Livraison rapide

guaranteed
products

Livraison rapide

Secure
payment

 

The power supply module provides the main power supply and control power supply. Select a power supply module according to the capacities of the servo motors and spindle motors being used. A single power supply module can be used to drive both the servo and spindle motors provided the capacity of the power supply module is not exceeded.

There are four types of power supply module, as follows:

(1) Power supply module (PSM) This power supply module is designed to provide a main power supply of 200V/230V. The module uses power regeneration that returns energy to the power supply during motor deceleration (regeneration).

(2) Power supply module (PSMR) This power supply module is designed to provide a main power supply of 200V/230V. The module uses resistance regeneration that allows energy to be consumed by resistance during motor deceleration (regeneration). Regenerative discharge unit This unit is a resistance used to consume energy during motor deceleration (regeneration). This unit is required whenever the PSMR is used.

(3) Power supply module (PSM–HV) This power supply module can be connected to a main power supply of 400V/460V without a transformer. The module uses power regeneration that returns energy to the power supply during motor deceleration (regeneration). It is used together with a servo amplifier module (SVM–HV) and spindle amplifier module (SPM–HV) of the 400–V input series. Capacitor module (PSMC–HV) This module is designed for DC voltage smoothing. It is required whenever the PSM–HV is used.

(4) Power supply module (PSMV–HV) This power supply module can be connected to a main power supply of 400V/460V without a transformer. The output voltage is held at 300VDC by a voltage conversion type converter. This unit uses a power regeneration method that returns energy to the power supply during motor deceleration (regeneration). The module is used together with a servo amplifier module (SVM) and spindle amplifier module (SPM) of the 200V input series.

AC reactor unit

This unit is a reactor designed for a PSMV–HV. It contains a fuse.

Height
38 cm / 14,9 in
Width
9 cm / 3,5 in
Length
30,7 cm / 12,09 in
Weight
5,5 kg / 11 lbs
Family
FANUC ALPHA POWER SUPPLY MODULE
Reference
A06B-6077-H111
Refurbished
3005271852140
300994465596

FANUC is a Japanese manufacturer of industrial robots, machining centers and numerical controls for machine tools

Since its creation in 1956, when the company’s founder, Dr. Seiuemon Inaba, introduced the concept of digital controls, FANUC has always been at the forefront of manufacturing techniques in the world. Moving from the automation of a single machine in the late 1950s to the automation of entire production lines over the following decades.

16 other products in the same category: