A05B-2301-C332 - Teach Pendant - FANUC Expand

A05B-2301-C332 - Teach Pendant - FANUC



This Fanuc branded reference box A05B-2301-C332 is at your disposal.

This Teach Pendant, for Robot FANUC working with controller R-J3, makes possible the programming and all the control operations and others of the robots FANUC.

This FANUC teach reconditioned and tested on FANUC robot.

More details

In stock, shipping within 24h.

970,00 €

Livraison : 1 à 3 semaines

livraison-2.pngQuick delivery

garantis2.pngWarranted systems

paiement-securise-SEI_1.jpgSecure Payment 

Product options

standard exchange refurbished

Standard exchange service

Reconditioned and tested systems
6 to 12 months warranty

new systems

Standard exchange service

New systems
12 to 24 months warranty

supply refurbished

Supply service

Reconditioned and tested systems
6 to 12 months warranty

supply new

Supply service

New systems
12 to 24 months warranty

supply in the state

Supply service

Systems sold in the state
without warranty

1) Power-down the controller, and disconnect the cable at the pendant
2) Remove the Velcro OEM hand strap from the upper cam only
3) Place the bumper face up on a clean, dry surface
4) Insert the hand strap through the lower-left corner (cut-out) of the bumper
5) Continue by inserting the pendant into the lower-left corner of the bumper. Ensure the
lower hand-strap cam and cable connections are fully seated into the bumper
6) Pull the bumper across the bottom of the OEM pendant, then along the sides and over the handle atop the pendant
7) Refit the Velcro OEM hand strap to the bumpered pendant
8) Note: If your local safety requirements dictate unencumbered or direct access to the
E-stop button, cut the protective rubber brow as your safety requirements dictate. A molded cut-line is embossed around the E-Stop brow. A utility knife may be used to cut the SantopreneTM
9) Reconnect the controller cable
10) Power-up the controller
11) Installation is complete

Height 7 cm / 2,7 in
Width 21 cm / 8,2 in
Length 28 cm / 11 in
Weight 1,1 kg / 2,4 lbs
Reference A05B-2301-C332

If Service exchange, thank you describe below the defect found on your defective part.
Allowed file formats are: GIF, JPG, PNG


* required fields

No customer reviews for the moment.

Write a review

A05B-2301-C332 - Teach Pendant - FANUC

A05B-2301-C332 - Teach Pendant - FANUC

FANUC est un fabricant japonais de robots industriels, de centres d'usinages et de commandes numériques pour machine-outil

Depuis sa création en 1956, lorsque le fondateur de l'entreprise, le Dr. Seiuemon Inaba, introduisit le concept des commandes numériques, FANUC a toujours été à l'avant-garde des techniques de fabrication dans le monde. Passant de l'automatisation d'une simple machine à la fin des années 50 à celle de lignes entières de production au cours des décennies qui ont suivi.


On this site, we use tools that store cookies on your device. Cookies are used to enable the site to function properly, to generate statistical reports and to advertise our services / products. With these cookies, you help us to offer you a better user experience.