Catalog

Showing 37-72 of 98 item(s)

R7D-APA5L - Servodrive - OMRON

R7D-APA5L

This OMRON servodrive and reference R7D-APA5L is part of the series SMARTSTEP A.R7D-APA5L : Single phase 100/115V AC, 50/60Hz - 50WThis R7D-APA5L servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€460.00

R7D-AP01L - Servodrive - OMRON

R7D-AP01L

This OMRON servodrive and reference R7D-AP01L is part of the series SMARTSTEP A.R7D-AP01L : Single phase 100/115V AC, 50/60Hz - 100WThis R7D-AP01L servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€580.00

R7D-AP02L - Servodrive - OMRON

R7D-AP02L

This OMRON servodrive and reference R7D-AP02L is part of the series SMARTSTEP A.R7D-AP02L : Single phase 100/115V AC, 50/60Hz - 200WThis R7D-AP02L servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€670.00

R7D-AP04L - Servodrive - OMRON

R7D-AP04L

This OMRON servodrive and reference R7D-AP04L is part of the series SMARTSTEP A.R7D-AP04L : Single phase 100/115V AC, 50/60Hz - 400WThis R7D-AP04L servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€760.00

LXM15LD13M3 - Motion servo drive - SCHNEIDER ELECTRIC

LXM15LD13M3

This servo drive for motion control SCHNEIDER ELECTRIC reference LXM15LD13M3 is an AC servo drive for universal control. LXM15 series Motion servo drive: 0.9kW, Single-phase, 200 - 240V, 50/60Hz. With integrated EMC filter. Three phase supply : 1 kW. This motion servo drive LXM15LD13M3 is at your disposal to replace your defective equipment and has a...

€2,910.00

LXM15LD21M3 - Motion servo drive - SCHNEIDER ELECTRIC

LXM15LD21M3

This servo drive for motion control SCHNEIDER ELECTRIC reference LXM15LD21M3 is an AC servo drive for universal control. LXM15 series Motion servo drive: 1.2kW, Single-phase, 200 - 240V, 50/60Hz. With integrated EMC filter. Three phase supply : 2.1 kW. This motion servo drive LXM15LD21M3 is at your disposal to replace your defective equipment and has a...

€1,290.00

LXM15LD28M3 - Motion servo drive - SCHNEIDER ELECTRIC

LXM15LD28M3

This servo drive for motion control SCHNEIDER ELECTRIC reference LXM15LD28M3 is an AC servo drive for universal control. LXM15 series Motion servo drive: 1.2kW, Single-phase, 200 - 240V, 50/60Hz. With integrated EMC filter. Three phase supply : 3.4 kW. This motion servo drive LXM15LD28M3 is at your disposal to replace your defective equipment and has a...

€960.00

LXM15LU60N4 - Motion servo drive - SCHNEIDER ELECTRIC

LXM15LU60N4

This servo drive for motion control SCHNEIDER ELECTRIC reference LXM15LU60N4 is an AC servo drive for universal control. LXM15 series Motion servo drive LEXIUM 15 LP : 200 - 240V, 50/60Hz. With integrated EMC filter. Three phase supply : 1.1 kW. 1.5A. This motion servo drive LXM15LU60N4 is at your disposal to replace your defective equipment and has a...

€1,960.00

LXM15LD10N4 - Motion servo drive - SCHNEIDER ELECTRIC

LXM15LD10N4

This servo drive for motion control SCHNEIDER ELECTRIC reference LXM15LD10N4 is an AC servo drive for universal control. LXM15 series Motion servo drive LEXIUM 15 LP : 200 - 240V, 50/60Hz. With integrated EMC filter. Three phase supply : 2.1 kW, 3.0A. This motion servo drive LXM15LD10N4 is at your disposal to replace your defective equipment and has a...

€1,300.00

LXM15LD17N4 - Motion servo drive - SCHNEIDER ELECTRIC

LXM15LD17N4

This servo drive for motion control SCHNEIDER ELECTRIC reference LXM15LD17N4 is an AC servo drive for universal control. LXM15 series Motion servo drive LEXIUM 15 LP : 200 - 240V, 50/60Hz. With integrated EMC filter. Three phase supply : 4.3 kW, 6.0A. This motion servo drive LXM15LD17N4 is at your disposal to replace your defective equipment and has a...

€1,320.00

LXM15MD28N4 - Motion servo drive - SCHNEIDER ELECTRIC

LXM15MD28N4

This servo drive for motion control SCHNEIDER ELECTRIC reference LXM15MD28N4 is an AC servo drive for universal control. LXM15 series Motion servo drive LEXIUM 15 MP : 200 - 240V, 50/60Hz. With integrated EMC filter. Three phase supply : 5.7 kW, 10.0A. This motion servo drive LXM15MD28N4 is at your disposal to replace your defective equipment and has a...

€3,450.00

LXM15MD40N4 - Motion servo drive - SCHNEIDER ELECTRIC

LXM15MD40N4

This servo drive for motion control SCHNEIDER ELECTRIC reference LXM15MD40N4 is an AC servo drive for universal control. LXM15 series Motion servo drive LEXIUM 15 MP : 200 - 240V, 50/60Hz. With integrated EMC filter. Three phase supply : 7.9 kW, 14.0A. This motion servo drive LXM15MD40N4 is at your disposal to replace your defective equipment and has a...

€1,750.00

LXM15MD56N4 - Motion servo drive - SCHNEIDER ELECTRIC

LXM15MD56N4

This servo drive for motion control SCHNEIDER ELECTRIC reference LXM15MD56N4 is an AC servo drive for universal control. LXM15 series Motion servo drive LEXIUM 15 MP : 200 - 240V, 50/60Hz. With integrated EMC filter. Three phase supply : 11.4 kW, 20.0A. This motion servo drive LXM15MD56N4 is at your disposal to replace your defective equipment and has a...

€2,570.00

LXM15HC11N4X - Motion servo drive - SCHNEIDER ELECTRIC

LXM15HC11N4X

This servo drive for motion control SCHNEIDER ELECTRIC reference LXM15HC11N4X is an AC servo drive for universal control. LXM15 series Motion servo drive LEXIUM 15 HP : 200 - 240V, 50/60Hz. With integrated EMC filter. Three phase supply : 22.3 kW, 40.0A. This motion servo drive LXM15HC11N4X is at your disposal to replace your defective equipment and has a...

€4,320.00

LXM15HC20N4X - Motion servo drive - SCHNEIDER ELECTRIC

LXM15HC20N4X

This servo drive for motion control SCHNEIDER ELECTRIC reference LXM15HC20N4X is an AC servo drive for universal control. LXM15 series Motion servo drive LEXIUM 15 HP : 200 - 240V, 50/60Hz. With integrated EMC filter. Three phase supply : 42.5 kW, 70.0A. This motion servo drive LXM15HC20N4X is at your disposal to replace your defective equipment and has a...

€4,830.00

R7M-A10030-BS1 - Servo motor - OMRON

R7M-A10030-BS1

This OMRON R7M-A10030-BS1 servo motor is a SMARTSTEP A series motor. Characteristics: 230V, 100W, 0.87A, with brake for R7D-AP01H servo drive. This R7M-A10030-BS1 servomotor is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€570.00

R7M-A20030-S1-D - Servo motor - OMRON

R7M-A20030-S1-D

This OMRON R7M-A20030-S1-D servo motor is a SMARTSTEP A series motor. Characteristics: 230V, 200W, 2A without brake for R7D-AP02H servo drive. This R7M-A20030-S1-D servomotor is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€530.00

R7M-A75030-BS1-D - Servo motor - OMRON

R7M-A75030-BS1-D

This OMRON R7M-A75030-BS1-D servo motor is a SMARTSTEP A series motor. Characteristics: 230V, 750W, 4.4A, with brake for R7D-AP08H servo drive. This R7M-A75030-BS1-D servomotor is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,795.00

SI-PROFIBUS - Interface module - CONTROL TECHNIQUES

SI-PROFIBUS

This SI-PROFIBUS interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with M200, M300, M400, M600, M700 drives This SI-PROFIBUS Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,250.00

SM-Applications Plus - Interface module - CONTROL TECHNIQUES

SM-Applications Plus

This SM-Applications Plus interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-Applications Plus Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€165.00

SM-CANopen - Interface module - CONTROL TECHNIQUES

SM-CANopen

This SM-CANopen interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-CANopen Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€3,926.00

SM-DEVICENET - Interface module - CONTROL TECHNIQUES

SM-DEVICENET

This SM-DEVICENET interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-DEVICENET Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€130.00

SM-ETHERNET - Interface module - CONTROL TECHNIQUES

SM-ETHERNET

This SM-ETHERNET interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-ETHERNET Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€420.00

SM-EZMOTION - Interface module - CONTROL TECHNIQUES

SM-EZMOTION

This SM-EZMOTION interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Mentor MP drives. This SM-EZMOTION Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€420.00

SM-I/O plus - Interface module - CONTROL TECHNIQUES

SM-I/O plus

This SM-I/O plus interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-I/O plus Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€195.00

SM-Resolver - Interface module - CONTROL TECHNIQUES

SM-Resolver

This SM-Resolver interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-Resolver Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€450.00

SM-PROFIBUS DP - Interface module - CONTROL TECHNIQUES

SM-PROFIBUS DP

This SM-PROFIBUS DP interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-PROFIBUS DP Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€145.00

SM-Universal - Interface module - CONTROL TECHNIQUES

SM-Universal Encoder Plus - Interface module - CONTROL TECHNIQUES

SM-Universal Encoder Plus

This SM-Universal Encoder Plus interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-Universal Encoder Plus Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to...

€140.00

UD50 - option module - CONTROL TECHNIQUES

UD50

This CONTROL TECHNIQUES option module reference UD50 is an I/O module interface for the UNIDRIVE range. The small optional UD50 module is an interface module to be installed in a Unidrive. This UD50 option module is at your disposal in supply or in standard exchange to replace your defective equipment and has a guarantee

€389.00

UD501 - option module - CONTROL TECHNIQUES

UD51 - option module - CONTROL TECHNIQUES

UD51

This CONTROL TECHNIQUES option module reference UD51 is a encoder module interface for the UNIDRIVE range. The small optional UD51 module is an interface module to be installed in a Unidrive. This UD51 option module is at your disposal in supply or in standard exchange to replace your defective equipment and has a guarantee

€195.00

UD70 - Option module - CONTROL TECHNIQUES

UD70

This CONTROL TECHNIQUES option module reference UD70 is a module for the UNIDRIVE range The UD70 is a compact microcomputer contained in a large option module for easy installation in any size Unidrive. This CONTROL TECHNIQUES interface module is available as a supply to replace your defective equipment and has a guarantee

€590.00

SM-Applications - Interface module - CONTROL TECHNIQUES

SM-Applications

This SM-Applications interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-Applications Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€120.00

SM-PROFIBUS DP-V1 - Interface module - CONTROL TECHNIQUES

SM-PROFIBUS DP-V1

This SM-PROFIBUS DP-V1 interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-PROFIBUS DP-V1 Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€145.00

UD73 - Option module - CONTROL TECHNIQUES

UD73

This CONTROL TECHNIQUES option module reference UD73 is a module for the UNIDRIVE range The UD73 is a compact microcomputer contained in a large option module for easy installation in any size Unidrive. This CONTROL TECHNIQUES interface module is available as a supply to replace your defective equipment and has a guarantee

€1,960.00

SM-Encoder Plus - Interface module - CONTROL TECHNIQUES

SM-Encoder Plus

This SM-Encoder Plus interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-Encoder Plus Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€180.00

SM-Encoder Output Plus - Interface module - CONTROL TECHNIQUES

SM-Encoder Output Plus

This SM-Encoder Output Plus interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-Encoder Output Plus Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€303.00