Catalog

Showing 1-36 of 44 item(s)

JZNC-XPP02B - Teach Pendant - YASKAWA

JZNC-XPP02B

This Teach Pendant YASKAWA and reference JZNC-XPP02B is used for the robots XRC MOTOMAN / Yasnac Easy multi-language interface and high performance thanks to its RISC processor. This Teach Pendant YASKAWA is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€2,100.00

UMV 4301 22T - Synchron Controller - LEROY SOMER

UMV 4301 22T

This reference LEROY SOMER speed controller UMV4301 22T is a drive for asynchronous and synchronous motor. Inverter 15 kW, 34 A This UMV4301 22T speed controller is at your disposal to replace defective equipment and has a guarantee adapted to your needs. Speed controller reconditioned and tested in full load (test of duration) on LEROY SOMER motor.

€3,390.00

JUSP-WS30AB - Amplifier - YASKAWA

JUSP-WS30AB

This JUSP-WS30AB and YASKAWA drive is a controller for XRC robot control unit. 2,2 kW Amplifier for Servopack CACR-SK45AAB and CACR-SK16MAAB. This JUSP-WS30AB YASKAWA drive is at your disposal to replace your defective equipment and has a warranty adapted to your needs.

€950.00

JANCD-XEW01-1 - Control board - YASKAWA

JANCD-XEW01-1

This control board JANCD-XEW01-1 and brand YASKAWA is a control board for XRC robot control unit. XEW01-01: Analog output x 3 ports + Status signal Input of a welder This JANCD-XEW01-1 YASKAWA card is at your disposal to replace your defective hardware and has a warranty adapted to your needs.

€370.00

JANCD-MFB01-1 - Control board - YASKAWA

JANCD-MFB01-1

This interface board JANCD-MFB01-1 and YASKAWA is an interface board for XRC robot control unit. Fieldbus system via standard AnyBus modules This JANCD-MFB01-1 YASKAWA interface board is available to replace your defective equipment and has a guarantee adapted to your needs.

€640.00

JARCR-XEB01-1 - Backboard Card - YASKAWA

JARCR-XEB01-1

This expansion card JANCD-XEB01-1 and brand YASKAWA is an expansion card for XRC robot control unit. Backboard card for JANCD-MFB01 This JANCD-XEB01-1 YASKAWA card is at your disposal to replace your defective hardware and has a warranty adapted to your needs.

€380.00

JZRCR-XSU02 - Servo Controller - YASKAWA

JZRCR-XSU02

This drive JZRCR-XSU02 and YASKAWA is a drive for XRC robot control unit. For type: SV3X, UP6, S16X, UP20, UP50, UP20M, SK45X, SK16MX, SP70X .. This YASKAWA JZRCR-XSU02 drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€640.00

UMV 4301 40T - Synchron Controller - LEROY SOMER

UMV 4301 40T

This reference LEROY SOMER speed controller UMV4301 40T is a drive for asynchronous and synchronous motor. Inverter 30 kW, 60 A This UMV4301 40T speed controller is at your disposal to replace defective equipment and has a guarantee adapted to your needs. Speed controller reconditioned and tested in full load (test of duration) on LEROY SOMER motor.

€3,900.00

JUSP-ACP05JAB - Converter - YASKAWA

JUSP-ACP05JAB

This YASKAWA converter is composed of 2 modules: JUSP-ACP05JAB. It is used in CACR-SV3AAA servopacks, CACR-UP6AAC, CACR-SK16AAC, CACR-UP20AAA. Capacity of 5A. This YASKAWA converter is at your disposal to replace your defective equipment. It is sold with a guarantee of operation adapted to your needs.

€1,180.00

JUSP-WSCA01AA + JUSP-WSCB01AA - Amplifier - YASKAWA

JUSP-WSCA01AA + JUSP-WSCB01AA

This amplifier JUSP-WSCA01AA + JUSP-WSCB01AA and YASKAWA is a amplifier for XRC robot control unit. 100W Amplifier for Servopack CACR-UP6AAC, CACR-SV3AAA This amplifier JUSP-WSCA01AA + JUSP-WSCB01AA is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€320.00

JUSP-WSCB05AA + JUSP-WSCA05AA + JUSP-WSCD05AA - Amplifier - YASKAWA

JUSP-WSCB05AA+WSCA05AA+WSCD05AA

This amplifier JUSP-WSCB05AA + JUSP-WSCA05AA + JUSP-WSCD05AA and YASKAWA brand is a drive for XRC robot control unit. 500W Amplifier for Servopack CACR-UP6AAC, CACR-SV3AAA This amplifier JUSP-WSCB05AA + JUSP-WSCA05AA + JUSP-WSCD05AA is at your disposal to replace your defective hardware.

€310.00

JUSP-WSCD10AA+JUSP-WSCA10AA+JUSP-WSCB10AA - Amplifier - YASKAWA

JUSP-WSCD10AA+WSCA10AA+WSCB10AA

This amplifier JUSP-WSCD10AA+JUSP-WSCA10AA+JUSP-WSCB10AA and YASKAWA brand is a drive for XRC robot control unit. 1kW Amplifier for Servopack CACR-UP6AAC, CACR-SV3AAA This amplifier JUSP-WSCD10AA+JUSP-WSCA10AA+JUSP-WSCB10AA is at your disposal to replace your defective hardware.

€640.00

JUSP-WSCB05AA + JUSP-WSCB05AA + JUSP-WSCD10AA - Amplifier - YASKAWA

JUSP-WSCB05AA+WSCB05AA+WSCD10AA

This amplifier JUSP-WSCB05AA + JUSP-WSCB05AA + JUSP-WSCD10AA and YASKAWA brand is a drive for XRC robot control unit. 500W Amplifier for Servopack CACR-UP6AAC, CACR-SV3AAA This amplifier JUSP-WSCB05AA + JUSP-WSCB05AA + JUSP-WSCD10AA is at your disposal to replace your defective hardware.

€410.00

JUSP-ACPA05JAA + JUSP-ACPCB05JAA - Converter - YASKAWA

JUSP-ACPA05JAA + JUSP-ACPCB05JAA

This YASKAWA converter is composed of 2 modules: JUSP-ACPA05JAA + JUSP-ACPCB05JAA. It is used in CACR-SV3AAA servopacks, CACR-UP6AAC, CACR-SK16AAC, CACR-UP20AAA. Capacity of 5A. This YASKAWA converter is at your disposal to replace your defective equipment. It is sold with a guarantee of operation adapted to your needs.

€920.00

JUSP-RCP01AAC - Power Supply Module - YASKAWA

JUSP-RCP01AAC

This YASKAWA power supply module is reference JUSP-RCP01AAC. It is used several YASKAWA servopacks. This power supply module generates a DC power supply (+ 5V, + 7V, ± 15V) for servo control. The AC input (single phase: 200/220 VAC) is provided by the power supply. This YASKAWA module is at your disposal to replace your defective equipment.

€420.00

JANCD-XCP01-1 - CPU Control Board - YASKAWA

JANCD-XCP01-1

YASKAWA CPU and reference card JANCD-XCP01-1 is used with the XRC MOTOMAN controller. Includes JANCD-XIF03-1 and JANCD-XMM01-2 cards This CPU JANCD-XCP01-1 is at your disposal to replace your defective equipment and has a guarantee of operation adapted to your needs.

€1,050.00

CPS-150F - Power Supply - YASKAWA

CPS-150F

This YASKAWA/YASNAC CN05 and CPS-150F Power Supply is used for the NX100 and XRC MOTOMAN series. Input voltage - 200-230 V AC, frequency - 50/60 Hz, current - 2.1 A This CPS-150F power supply is at your disposal to replace your defective equipment and has a guarantee of operation adapted to your needs.

€940.00

JZNC-XRK01B-1 - CPU Rack - YASKAWA

JZNC-XRK01B-1

This JZNC-XRK01B-1 reference and YASKAWA brand rack is for YASNAC XRC. The CPU Rack (JZNC-XRK01X-X) does not include any cards. BLANK RACK. This rack JZNC-XRK01B-1 is at your disposal to replace your defective equipment and has a guarantee of operation adapted to your needs.

€290.00

On sale!

S30A-4011CA - Laser Scanner - SICK

S30A-4011CA

This S3000 series laser scanner has four protection fields and four servo fields that are freely programmable using your SICK software. You can therefore configure your laser scanner according to the conditions of your installation. This SICK S30A-4011CA scanner is at your disposal to replace your defective equipment.

€2,585.00

S30A-4011BA - Laser Scanner - SICK

S30A-4011BA

This S3000 Series safety laser scanner features 1 protective field set and four servo fields that are freely programmable using your SICK software. You can therefore configure your laser scanner according to the conditions of your installation. Protective Field range : 4 meters This SICK S30A-4011BA scanner is at your disposal to replace your defective...

€2,220.00

S30A-7011CA - Laser Scanner - SICK

S30A-7011CA

This S3000 series safety laser scanner features 4 protective field sets and 12 control fields that are freely programmable using your SICK software. You can therefore configure your laser scanner according to the conditions of your installation. Protective Field range : 7 m. This SICK S30A-7011CA scanner is at your disposal to replace your defective...

€715.00

TSXP47455R - Interface Processor - TELEMECANIQUE

TSXP47455R

This TELEMECANIQUE and reference TSXP47455R processor card belongs to the Series 7 range. Module for TSX47-40 range Fipio / Fipway version 5.8 This Telemecanique TSXP47455R module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Refurbished and fully loaded power supply (time test) on TELEMECANIQUE bench.

€310.00

TSXRKD8FP - Rack - TELEMECANIQUE

TSXRKD8FP

This TELEMECANIQUE rack is reference TSXRKD8FP. It is part of the Series 7 range. UC rack (8 + 8) not venile. CPU Rack (8 + 8) no. fans. This TELEMECANIQUE rack is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Reconditioned rack and tested on automaton bench (Test 100%).

€495.00

TSXDST1682 - Output Module - TELEMECANIQUE

TSXDST1682

This TELEMECANIQUE digital output module is reference TSXDST1682. It is part of the TSX Series 7. 24 volts c.c. / static protected. 16 outputs. This TELEMECANIQUE output module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Module reconditioned and tested on a test bench (100% test).

€60.00

TSXP673 - Interface Processor - TELEMECANIQUE

TSXP673

This TELEMECANIQUE brand and TSXP673 reference processor card belongs to the TSX Series 7 range. Module for TSX67-30 Series Processor V: 2.30 This TELEMECANIQUE TSXP673 module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Module reconditioned and tested on a test bench (100% test).

€1,185.00

TSXP47420 - Interface Processor - TELEMECANIQUE

TSXP47420

This TELEMECANIQUE brand and TSXP47420 reference processor card belongs to the TSX Series 7 range. Module for TSX47-40 range version 4.3. Integrated unit link. 48k of internal RAM. 64k cartridge. This Télémécanique TSXP47420 module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€510.00

TSXSCM2116 - Communication Coupler - TELEMECANIQUE

TSXSCM2116

This TELEMECANIQUE communication module is reference TSXSCM2116. It is part of the TSX Series 7 series. Channel 0: Isolated RS232 C, Channel 1: UNI-TELWAY. This TELEMECANIQUE communication module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Module reconditioned and tested on a test bench (100% test).

€430.00

AX5112-0000 - Digital Compact Servo Drive - BECKHOFF

AX5112-0000

This reference AX5112-0000 and brand BECKHOFF is a servo drive of the AX5000 series. Servo Drive: 1x12A, 3 phases 100-480VAC, 50 / 60Hz. This BECKHOFF servo drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,280.00

TSXMAPCPC742 - PC-Mapway board - TELEMECANIQUE

TSXMAPCPC742

This TELEMECANIQUE network coupler board is reference TSXMAPCPC742. It is part of the TSX Series 7 range. Used for the FTX 507 workstation. This TELEMECANIQUE network coupler module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Module reconditioned and tested on a test bench (100% test).

€1,065.00

UMV 4301 50T - Synchron Controller - LEROY SOMER

UMV 4301 50T

This reference LEROY SOMER controller UMV 4301 50T is a controller for asynchronous and synchronous motor. Inverter 37 kW, 70 A This UMV 4301 50T controller is at your disposal to replace defective equipment and has a guarantee adapted to your needs. Speed controller reconditioned and tested in full load (test of duration) on LEROY SOMER motor.

€6,840.00

UMV 4301 33T - Synchron Controller - LEROY SOMER

UMV 4301 33T

This reference LEROY SOMER controller UMV 4301 33T is a controller for asynchronous and synchronous motor. Inverter 22 kW, 46 A This UMV 4301 33T controller is at your disposal to replace defective equipment and has a guarantee adapted to your needs. Speed controller reconditioned and tested in full load (test of duration) on LEROY SOMER motor.

€3,370.00

UMV 4301 27T - Synchron Controller - LEROY SOMER

UMV 4301 27T

This reference LEROY SOMER speed controller UMV4301 27T is a drive for asynchronous and synchronous motor. Inverter 18,5 kW, 40 A This UMV4301 27T speed controller is at your disposal to replace defective equipment and has a guarantee adapted to your needs. Speed controller reconditioned and tested in full load (test of duration) on LEROY SOMER motor.

€3,920.00

TSXAXM162 - Axial command coupler - TELEMECANIQUE

TSXAXM162

This TELEMECANIQUE axial control coupler is reference TSXAXM162. It is part of the TSX Series 7 series. For MODICON TSX, analog, 3 inputs; 24VDC, 5 outputs. This TELEMECANIQUE axial command coupleur is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Module reconditioned and tested on a test bench (100% test).

€850.00

AX5101-0000 - Digital Compact Servo Drive - BECKHOFF

AX5101-0000

This reference AX5101-0000 and brand BECKHOFF is a servo drive of the AX5000 series. Servo Drive: 1x1,5A, 3 phases 100-480VAC, 50 / 60Hz. This BECKHOFF servo drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€460.00

AX5103-0000 - Digital Compact Servo Drive - BECKHOFF

AX5103-0000

This reference AX5103-0000 and brand BECKHOFF is a servo drive of the AX5000 series. Servo Drive: 1x3A, 3 phases 100-480VAC, 50/60Hz. This BECKHOFF servo drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€860.00

AX5106-0000 - Digital Compact Servo Drive - BECKHOFF

AX5106-0000

This reference AX5106-0000 and brand BECKHOFF is a servo drive of the AX5000 series. Servo Drive: 1x6A, 3 phases 100-480VAC, 50/60Hz. This BECKHOFF servo drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€640.00