Catalog

Showing 37-72 of 301 item(s)

UNI 4401 - Synchron Controller - CONTROL TECHNIQUES

UNI 4401

This reference CONTROL TECHNIQUES speed controller UNI 4401 is a drive for asynchronous and synchronous motor. Inverter 45 kW, 96A, 380-480V This UNI 4401 speed controller is at your disposal to replace defective equipment and has a guarantee adapted to your needs. Speed controller reconditioned and tested in full load (test of duration) on CONTROL...

€3,990.00

UNI 4402 - Synchron Controller - CONTROL TECHNIQUES

UNI 4402

This reference CONTROL TECHNIQUES speed controller UNI 4402 is a drive for asynchronous and synchronous motor. Inverter 55 kW, 124A, 380-480V This UNI 4402 speed controller is at your disposal to replace defective equipment and has a guarantee adapted to your needs. Speed controller reconditioned and tested in full load (test of duration) on CONTROL...

€3,480.00

UNI 4403 - Synchron Controller - CONTROL TECHNIQUES

UNI 4403

€7,280.00

UNI 4404 - Synchron Controller - CONTROL TECHNIQUES

UNI 4404

This reference CONTROL TECHNIQUES speed controller UNI 4404 is a drive for asynchronous and synchronous motor. Inverter 90 kW, 180A, 380-480V This UNI 4404 speed controller is at your disposal to replace defective equipment and has a guarantee adapted to your needs. Speed controller reconditioned and tested in full load (test of duration) on CONTROL...

€7,480.00

UNI 4405 - Synchron Controller - CONTROL TECHNIQUES

UNI 4405

This reference CONTROL TECHNIQUES speed controller UNI 4405 is a drive for asynchronous and synchronous motor. Inverter 110 kW, 202A, 380-480V This UNI 4405 speed controller is at your disposal to replace defective equipment and has a guarantee adapted to your needs. Speed controller reconditioned and tested in full load (test of duration) on CONTROL...

€7,890.00

UD71 - Communications interface module - CONTROL TECHNIQUES

UD71

This CONTROL TECHNIQUES communication interface module UD71 is a module for the UNIDRIVE range. The UD71 provides the ability to read and write values in the UNIDRIVE drive parameters and can act as a slave module. This CONTROL TECHNIQUES interface module is at your disposal to replace your defective equipment and has a warranty.

€410.00

UMV 4301 8T - Synchron Controller - LEROY SOMER

UMV 4301 8T

This reference LEROY SOMER speed controller UMV 4301 8T is a drive for asynchronous and synchronous motor. Inverter 5,5 kW, 12 A, 380-480V This UMV 4301 8T speed controller is at your disposal to replace defective equipment and has a guarantee adapted to your needs. Speed controller reconditioned and tested in full load (test of duration) on LEROY SOMER...

€1,015.00

UMV 4301 11T - Synchron Controller - LEROY SOMER

UMV 4301 11T

This reference LEROY SOMER speed controller UMV 4301 11T is a drive for asynchronous and synchronous motor. Inverter 7,5 kW, 16 A, 380-480V This UMV 4301 11T speed controller is at your disposal to replace defective equipment and has a guarantee adapted to your needs. Speed controller reconditioned and tested in full load (test of duration) on LEROY...

€1,470.00

UMV 4301 16T - Synchron Controller - LEROY SOMER

UMV 4301 16T

This reference LEROY SOMER speed controller UMV 4301 16T is a drive for asynchronous and synchronous motor. Inverter 11 kW, 25 A, 380-480V This UMV 4301 16T speed controller is at your disposal to replace defective equipment and has a guarantee adapted to your needs. Speed controller reconditioned and tested in full load (test of duration) on LEROY...

€1,685.00

TSX07301022 - Expandable PLC Base - SCHNEIDER ELECTRIC

TSX07301022

SCHNEIDER/TELEMECANIQUE PLC base with reference TSX07301022. Range: MODICON NANO. Power supply : 24V, 6 inputs, 4 relay outputs. No transistor outputs This SCHNEIDER base is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. SCHNEIDER base reconditioned and tested under full load (duration test) on a TSX...

€270.00

JUSP-ACP05JAA + JUSP-ACPCB05JAA - Converter - YASKAWA

JUSP-ACP05JAA + JUSP-ACPCB05JAA

This YASKAWA converter is composed of 2 modules: JUSP-ACP05JAA + JUSP-ACPCB05JAA. It is used in CACR-SV3AAA servopacks, CACR-UP6AAC, CACR-SK16AAC, CACR-UP20AAA. Capacity of 5A. This YASKAWA converter is at your disposal to replace your defective equipment. It is sold with a guarantee of operation adapted to your needs.

€920.00

X20AI1744 - Analog input module - B&R

X20AI1744

This B&R analog input module is reference X20AI1744. It belongs to the X20 range. 1 full bridge strain gauge input, 24-bit converter resolution. 5 kHz input filter This B&R input module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€580.00

X20AI2622 - Analog input module - B&R

X20AI2622

This B&R analog input module is reference X20AI2622. It belongs to the X20 range. • 2 analog inputs • Either current or voltage signal • 13-bit digital converter resolution This B&R input module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€280.00

X20AI4622 - Analog input module - B&R

X20AI4622

This B&R analog input module is reference X20AI4622. It belongs to the X20 range. • 2 analog inputs • Either current or voltage signal • 13-bit digital converter resolution This B&R input module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€160.00

X20BM11 - Bus module - B&R

X20BM11

This B&R bus module is reference X20BM11. It belongs to the X20 range. The BM11 bus module serves as the base for all 24 VDC X20 I/O modules. • Bus module for 24 VDC I/O modules • The internal I/O supply is inter connected This B&R bus module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€39.00

X20BT9100 - Bus transmitter - B&R

X20BT9100

This B&R bus transmitter is reference X20BT9100. It belongs to the X20 range. The bus transmitter BT9100 provides for the seamless expansion of the X20 system. The stations can be up to 100m away from each other. • X2X Link bus transmitter • For seamless expansion of the systems • Up to 100 m segment lengths • Feed for internal I/O power supply This...

€89.00

X20ZF0000 - Dummy Module - B&R

X20ZF0000

This B&R dummy module is reference X20BT9100. It belongs to the X20 range. • Place holder for later system expansion • Used as a terminal holder • Module with no electrical function This B&R dummy module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€85.00

SI-PROFIBUS - Interface module - CONTROL TECHNIQUES

SI-PROFIBUS

This SI-PROFIBUS interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with M200, M300, M400, M600, M700 drives This SI-PROFIBUS Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,250.00

SM-Applications Plus - Interface module - CONTROL TECHNIQUES

SM-Applications Plus

This SM-Applications Plus interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-Applications Plus Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€165.00

SM-CANopen - Interface module - CONTROL TECHNIQUES

SM-CANopen

This SM-CANopen interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-CANopen Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€3,926.00

SM-DEVICENET - Interface module - CONTROL TECHNIQUES

SM-DEVICENET

This SM-DEVICENET interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-DEVICENET Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€130.00

SM-ETHERNET - Interface module - CONTROL TECHNIQUES

SM-ETHERNET

This SM-ETHERNET interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-ETHERNET Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€420.00

SM-EZMOTION - Interface module - CONTROL TECHNIQUES

SM-EZMOTION

This SM-EZMOTION interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Mentor MP drives. This SM-EZMOTION Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€420.00

SM-I/O plus - Interface module - CONTROL TECHNIQUES

SM-I/O plus

This SM-I/O plus interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-I/O plus Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€195.00

SM-Resolver - Interface module - CONTROL TECHNIQUES

SM-Resolver

This SM-Resolver interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-Resolver Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€450.00

SM-PROFIBUS DP - Interface module - CONTROL TECHNIQUES

SM-PROFIBUS DP

This SM-PROFIBUS DP interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-PROFIBUS DP Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€145.00

SM-Universal - Interface module - CONTROL TECHNIQUES

SM-Universal Encoder Plus - Interface module - CONTROL TECHNIQUES

SM-Universal Encoder Plus

This SM-Universal Encoder Plus interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-Universal Encoder Plus Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to...

€140.00

UD50 - option module - CONTROL TECHNIQUES

UD50

This CONTROL TECHNIQUES option module reference UD50 is an I/O module interface for the UNIDRIVE range. The small optional UD50 module is an interface module to be installed in a Unidrive. This UD50 option module is at your disposal in supply or in standard exchange to replace your defective equipment and has a guarantee

€389.00

UD501 - option module - CONTROL TECHNIQUES

UD51 - option module - CONTROL TECHNIQUES

UD51

This CONTROL TECHNIQUES option module reference UD51 is a encoder module interface for the UNIDRIVE range. The small optional UD51 module is an interface module to be installed in a Unidrive. This UD51 option module is at your disposal in supply or in standard exchange to replace your defective equipment and has a guarantee

€195.00

UD70 - Option module - CONTROL TECHNIQUES

UD70

This CONTROL TECHNIQUES option module reference UD70 is a module for the UNIDRIVE range The UD70 is a compact microcomputer contained in a large option module for easy installation in any size Unidrive. This CONTROL TECHNIQUES interface module is available as a supply to replace your defective equipment and has a guarantee

€590.00

SM-Applications - Interface module - CONTROL TECHNIQUES

SM-Applications

This SM-Applications interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-Applications Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€120.00

SM-PROFIBUS DP-V1 - Interface module - CONTROL TECHNIQUES

SM-PROFIBUS DP-V1

This SM-PROFIBUS DP-V1 interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-PROFIBUS DP-V1 Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€145.00

UD73 - Option module - CONTROL TECHNIQUES

UD73

This CONTROL TECHNIQUES option module reference UD73 is a module for the UNIDRIVE range The UD73 is a compact microcomputer contained in a large option module for easy installation in any size Unidrive. This CONTROL TECHNIQUES interface module is available as a supply to replace your defective equipment and has a guarantee

€1,960.00

SM-Encoder Plus - Interface module - CONTROL TECHNIQUES

SM-Encoder Plus

This SM-Encoder Plus interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-Encoder Plus Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€180.00

SM-Encoder Output Plus - Interface module - CONTROL TECHNIQUES

SM-Encoder Output Plus

This SM-Encoder Output Plus interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-Encoder Output Plus Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€303.00

SM-I/O 32 - Interface module - CONTROL TECHNIQUES

SM-I/O 32

This SM-I/O 32 interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-I/O 32 Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€205.00