Catalog

Showing 37-72 of 99 item(s)

R7D-AP08H - Servodrive - OMRON

R7D-AP08H

This OMRON servodrive and reference R7D-AP08H is part of the series SMARTSTEP A.R7D-AP08H : Single phase 200V - 750W, filter R88A-FIW115This R7D-AP08H servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€1,810.00

R7D-APA3L - Servodrive - OMRON

R7D-APA3L

This OMRON servodrive and reference R7D-APA3L is part of the series SMARTSTEP A.R7D-APA3L : Single phase 100/115V AC, 50/60Hz - 30WThis R7D-APA3L servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€380.00

R7D-APA5L - Servodrive - OMRON

R7D-APA5L

This OMRON servodrive and reference R7D-APA5L is part of the series SMARTSTEP A.R7D-APA5L : Single phase 100/115V AC, 50/60Hz - 50WThis R7D-APA5L servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€460.00

R7D-AP01L - Servodrive - OMRON

R7D-AP01L

This OMRON servodrive and reference R7D-AP01L is part of the series SMARTSTEP A.R7D-AP01L : Single phase 100/115V AC, 50/60Hz - 100WThis R7D-AP01L servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€580.00

R7D-AP02L - Servodrive - OMRON

R7D-AP02L

This OMRON servodrive and reference R7D-AP02L is part of the series SMARTSTEP A.R7D-AP02L : Single phase 100/115V AC, 50/60Hz - 200WThis R7D-AP02L servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€670.00

R7D-AP04L - Servodrive - OMRON

R7D-AP04L

This OMRON servodrive and reference R7D-AP04L is part of the series SMARTSTEP A.R7D-AP04L : Single phase 100/115V AC, 50/60Hz - 400WThis R7D-AP04L servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€760.00

KDS 1.1-030-300-W0 - AC Servo Controller - INDRAMAT

KDS 1.1-030-300-W0

This INDRAMAT reference servo controller KDS 1.1-030-300-W0 is designed for INDRAMAT MAC 90 to MAC 160 engines. cold-running technology. Servo controller of 30A. Series 1, Configuration 1. Rated voltage of 300V. This INDRAMAT controller is at your disposal to replace your defective equipment and has a suitable guarantee. Servo controller tested on engine...

€1,080.00

KDS 1.1-050-300-W1 - AC Servo Controller - INDRAMAT

KDS 1.1-050-300-W1

This INDRAMAT reference servo controller KDS 1.1-050-300-W1 is designed for INDRAMAT MAC 90 to MAC 160 engines. cold-running technology. Servo controller of 50A. Series 1, Configuration 1. Rated voltage of 300V. This INDRAMAT controller is at your disposal to replace your defective equipment and has a suitable guarantee. Servo controller tested on engine...

€1,050.00

KDS 1.1-050-300-W1-220 - AC Servo Controller - INDRAMAT

KDS 1.1-050-300-W1-220

This INDRAMAT reference servo controller KDS 1.1-050-300-W1-220 is designed for INDRAMAT MAC 90 to MAC 160 engines. cold-running technology. Servo controller of 50A. Series 1, Configuration 1. Rated voltage of 300V. This INDRAMAT controller is at your disposal to replace your defective equipment and has a suitable guarantee. Servo controller tested on...

€1,100.00

KDS 1.1-100-300-W1 - AC Servo Controller - INDRAMAT

KDS 1.1-100-300-W1

This INDRAMAT reference servo controller KDS 1.1-100-300-W1 is designed for INDRAMAT MAC 90 to MAC 160 engines. cold-running technology. Servo controller of 100A. Series 1, Configuration 1. Rated voltage of 300V. This INDRAMAT controller is at your disposal to replace your defective equipment and has a suitable guarantee. Servo controller tested on engine...

€1,590.00

KDS 1.1-100-300-W1-220 - AC Servo Controller - INDRAMAT

KDS 1.1-100-300-W1-220

This INDRAMAT reference servo controller KDS 1.1-100-300-W1-220 is designed for INDRAMAT MAC 90 to MAC 160 engines. cold-running technology. Servo controller of 100A. Series 1, Configuration 1. Rated voltage of 300V. This INDRAMAT controller is at your disposal to replace your defective equipment and has a suitable guarantee. Servo controller tested on...

€1,480.00

KDS 1.3-050-300-W1 - AC Servo Controller - INDRAMAT

KDS 1.3-050-300-W1

This INDRAMAT reference servo controller KDS 1.3-050-300-W1 is designed for INDRAMAT MAC 90 to MAC 160 engines. cold-running technology. Servo controller of 50A. Series 1, Configuration 3. Rated voltage of 300V. This INDRAMAT controller is at your disposal to replace your defective equipment and has a suitable guarantee. Servo controller tested on engine...

€1,520.00

KDS 1.1-150-300-W1-220 - AC Servo Controller - INDRAMAT

KDS 1.1-150-300-W1-220

This INDRAMAT reference servo controller KDS 1.1-150-300-W1-220 is designed for INDRAMAT MAC 90 to MAC 160 engines. cold-running technology. Servo controller of 150A. Series 1, Configuration 1. Rated voltage of 300V. This INDRAMAT controller is at your disposal to replace your defective equipment and has a suitable guarantee. Servo controller tested on...

€2,360.00

KDS 1.3-100-300-W1 - AC Servo Controller - INDRAMAT

KDS 1.3-100-300-W1

This INDRAMAT reference servo controller KDS 1.3-100-300-W1 is designed for INDRAMAT MAC 90 to MAC 160 engines. cold-running technology. Servo controller of 100A. Series 1, Configuration 3. Rated voltage of 300V. This INDRAMAT controller is at your disposal to replace your defective equipment and has a suitable guarantee. Servo controller tested on engine...

€2,120.00

KDS 1.3-100-300-W1/S1041 - AC Servo Controller - INDRAMAT

KDS 1.3-100-300-W1/S104

This INDRAMAT reference servo controller KDS 1.3-100-300-W1/S104 is designed for INDRAMAT MAC 90 to MAC 160 engines. cold-running technology. Servo controller of 100A. Series 1, Configuration 3. Rated voltage of 300V. This INDRAMAT controller is at your disposal to replace your defective equipment and has a suitable guarantee. Servo controller tested on...

€2,900.00

KDS 1.3-150-300-W1 - AC Servo Controller - INDRAMAT

KDS 1.3-150-300-W1

This INDRAMAT reference servo controller KDS 1.3-150-300-W1 is designed for INDRAMAT MAC 90 to MAC 160 engines. cold-running technology. Servo controller of 150A. Series 1, Configuration 3. Rated voltage of 300V. This INDRAMAT controller is at your disposal to replace your defective equipment and has a suitable guarantee. Servo controller tested on engine...

€1,800.00

R7M-A10030-BS1 - Servo motor - OMRON

R7M-A10030-BS1

This OMRON R7M-A10030-BS1 servo motor is a SMARTSTEP A series motor. Characteristics: 230V, 100W, 0.87A, with brake for R7D-AP01H servo drive. This R7M-A10030-BS1 servomotor is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€570.00

R7M-A20030-S1-D - Servo motor - OMRON

R7M-A20030-S1-D

This OMRON R7M-A20030-S1-D servo motor is a SMARTSTEP A series motor. Characteristics: 230V, 200W, 2A without brake for R7D-AP02H servo drive. This R7M-A20030-S1-D servomotor is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€530.00

R7M-A75030-BS1-D - Servo motor - OMRON

R7M-A75030-BS1-D

This OMRON R7M-A75030-BS1-D servo motor is a SMARTSTEP A series motor. Characteristics: 230V, 750W, 4.4A, with brake for R7D-AP08H servo drive. This R7M-A75030-BS1-D servomotor is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,795.00

SI-PROFIBUS - Interface module - CONTROL TECHNIQUES

SI-PROFIBUS

This SI-PROFIBUS interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with M200, M300, M400, M600, M700 drives This SI-PROFIBUS Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,250.00

SM-Applications Plus - Interface module - CONTROL TECHNIQUES

SM-Applications Plus

This SM-Applications Plus interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-Applications Plus Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€165.00

SM-CANopen - Interface module - CONTROL TECHNIQUES

SM-CANopen

This SM-CANopen interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-CANopen Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€3,926.00

SM-DEVICENET - Interface module - CONTROL TECHNIQUES

SM-DEVICENET

This SM-DEVICENET interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-DEVICENET Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€130.00

SM-ETHERNET - Interface module - CONTROL TECHNIQUES

SM-ETHERNET

This SM-ETHERNET interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-ETHERNET Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€420.00

SM-EZMOTION - Interface module - CONTROL TECHNIQUES

SM-EZMOTION

This SM-EZMOTION interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Mentor MP drives. This SM-EZMOTION Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€420.00

SM-I/O plus - Interface module - CONTROL TECHNIQUES

SM-I/O plus

This SM-I/O plus interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-I/O plus Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€195.00

SM-Resolver - Interface module - CONTROL TECHNIQUES

SM-Resolver

This SM-Resolver interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-Resolver Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€450.00

SM-PROFIBUS DP - Interface module - CONTROL TECHNIQUES

SM-PROFIBUS DP

This SM-PROFIBUS DP interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-PROFIBUS DP Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€145.00

SM-Universal - Interface module - CONTROL TECHNIQUES

SM-Universal Encoder Plus - Interface module - CONTROL TECHNIQUES

SM-Universal Encoder Plus

This SM-Universal Encoder Plus interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-Universal Encoder Plus Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to...

€140.00

UD50 - option module - CONTROL TECHNIQUES

UD50

This CONTROL TECHNIQUES option module reference UD50 is an I/O module interface for the UNIDRIVE range. The small optional UD50 module is an interface module to be installed in a Unidrive. This UD50 option module is at your disposal in supply or in standard exchange to replace your defective equipment and has a guarantee

€389.00

UD501 - option module - CONTROL TECHNIQUES

UD51 - option module - CONTROL TECHNIQUES

UD51

This CONTROL TECHNIQUES option module reference UD51 is a encoder module interface for the UNIDRIVE range. The small optional UD51 module is an interface module to be installed in a Unidrive. This UD51 option module is at your disposal in supply or in standard exchange to replace your defective equipment and has a guarantee

€195.00

UD70 - Option module - CONTROL TECHNIQUES

UD70

This CONTROL TECHNIQUES option module reference UD70 is a module for the UNIDRIVE range The UD70 is a compact microcomputer contained in a large option module for easy installation in any size Unidrive. This CONTROL TECHNIQUES interface module is available as a supply to replace your defective equipment and has a guarantee

€590.00

SM-Applications - Interface module - CONTROL TECHNIQUES

SM-Applications

This SM-Applications interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-Applications Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€120.00

SM-PROFIBUS DP-V1 - Interface module - CONTROL TECHNIQUES

SM-PROFIBUS DP-V1

This SM-PROFIBUS DP-V1 interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-PROFIBUS DP-V1 Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€145.00

UD73 - Option module - CONTROL TECHNIQUES

UD73

This CONTROL TECHNIQUES option module reference UD73 is a module for the UNIDRIVE range The UD73 is a compact microcomputer contained in a large option module for easy installation in any size Unidrive. This CONTROL TECHNIQUES interface module is available as a supply to replace your defective equipment and has a guarantee

€1,960.00

SM-Encoder Plus - Interface module - CONTROL TECHNIQUES

SM-Encoder Plus

This SM-Encoder Plus interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-Encoder Plus Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€180.00