Catalog

Showing 1-36 of 69 item(s)

On sale!

S30A-4011CA - Laser Scanner - SICK

S30A-4011CA

This S3000 series laser scanner has four protection fields and four servo fields that are freely programmable using your SICK software. You can therefore configure your laser scanner according to the conditions of your installation. This SICK S30A-4011CA scanner is at your disposal to replace your defective equipment.

€2,585.00

S30A-4011BA - Laser Scanner - SICK

S30A-4011BA

This S3000 Series safety laser scanner features 1 protective field set and four servo fields that are freely programmable using your SICK software. You can therefore configure your laser scanner according to the conditions of your installation. Protective Field range : 4 meters This SICK S30A-4011BA scanner is at your disposal to replace your defective...

€2,220.00

S30A-7011CA - Laser Scanner - SICK

S30A-7011CA

This S3000 series safety laser scanner features 4 protective field sets and 12 control fields that are freely programmable using your SICK software. You can therefore configure your laser scanner according to the conditions of your installation. Protective Field range : 7 m. This SICK S30A-7011CA scanner is at your disposal to replace your defective...

€715.00

TSXP47455R - Interface Processor - TELEMECANIQUE

TSXP47455R

This TELEMECANIQUE and reference TSXP47455R processor card belongs to the Series 7 range. Module for TSX47-40 range Fipio / Fipway version 5.8 This Telemecanique TSXP47455R module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Refurbished and fully loaded power supply (time test) on TELEMECANIQUE bench.

€310.00

TSXRKD8FP - Rack - TELEMECANIQUE

TSXRKD8FP

This TELEMECANIQUE rack is reference TSXRKD8FP. It is part of the Series 7 range. UC rack (8 + 8) not venile. CPU Rack (8 + 8) no. fans. This TELEMECANIQUE rack is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Reconditioned rack and tested on automaton bench (Test 100%).

€495.00

TSXDST1682 - Output Module - TELEMECANIQUE

TSXDST1682

This TELEMECANIQUE digital output module is reference TSXDST1682. It is part of the TSX Series 7. 24 volts c.c. / static protected. 16 outputs. This TELEMECANIQUE output module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Module reconditioned and tested on a test bench (100% test).

€60.00

TSXP673 - Interface Processor - TELEMECANIQUE

TSXP673

This TELEMECANIQUE brand and TSXP673 reference processor card belongs to the TSX Series 7 range. Module for TSX67-30 Series Processor V: 2.30 This TELEMECANIQUE TSXP673 module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Module reconditioned and tested on a test bench (100% test).

€1,185.00

TSXP47420 - Interface Processor - TELEMECANIQUE

TSXP47420

This TELEMECANIQUE brand and TSXP47420 reference processor card belongs to the TSX Series 7 range. Module for TSX47-40 range version 4.3. Integrated unit link. 48k of internal RAM. 64k cartridge. This Télémécanique TSXP47420 module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€510.00

TSXSCM2116 - Communication Coupler - TELEMECANIQUE

TSXSCM2116

This TELEMECANIQUE communication module is reference TSXSCM2116. It is part of the TSX Series 7 series. Channel 0: Isolated RS232 C, Channel 1: UNI-TELWAY. This TELEMECANIQUE communication module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Module reconditioned and tested on a test bench (100% test).

€430.00

TSXMAPCPC742 - PC-Mapway board - TELEMECANIQUE

TSXMAPCPC742

This TELEMECANIQUE network coupler board is reference TSXMAPCPC742. It is part of the TSX Series 7 range. Used for the FTX 507 workstation. This TELEMECANIQUE network coupler module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Module reconditioned and tested on a test bench (100% test).

€1,065.00

TSXAXM162 - Axial command coupler - TELEMECANIQUE

TSXAXM162

This TELEMECANIQUE axial control coupler is reference TSXAXM162. It is part of the TSX Series 7 series. For MODICON TSX, analog, 3 inputs; 24VDC, 5 outputs. This TELEMECANIQUE axial command coupleur is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Module reconditioned and tested on a test bench (100% test).

€850.00

S30A-6011EA - Laser Scanner - SICK

S30A-6011EA

This safety laser scanner can only be used in combination with the EFI system group, eg. with a Flexi Soft safety control system or another S300 or S3000 safety laser scanner. Range: 5.5 m This SICK S30A-6011EA scanner is at your disposal to replace your defective equipment.

€2,560.00

S30A-7011EA - Laser Scanner - SICK

S30A-7011EA

This S3000 Series safety laser scanner features 1 protective field set and 64 servo fields that are freely programmable using your SICK software. You can therefore configure your laser scanner according to the conditions of your installation. Protective Field range : 7 meters This SICK S30A-7011EA scanner is at your disposal to replace your defective...

€890.00

SDS 4021 - Servo Converter - STÖBER

SDS 4021

This variable speed drive for servo motor reference SDS 4021 and brand Stöber is a variable speed drive from the POSIDYN SDS 4000 range. SDS 4021: Three-phase 230...480V, 2A, 1kVA. This Stöber drive is available to replace your defective equipment and has an appropriate warranty. Drive tested on an engine test bench.

€1,725.00

SDS 4011 - Servo Converter - STÖBER

SDS 4011

This variable speed drive for servo motor reference SDS 4011 and brand Stöber is a variable speed drive from the POSIDYN SDS 4000 range. SDS 4011: Three-phase 230...480V, 1.5A, 1kVA. This Stöber drive is available to replace your defective equipment and has an appropriate warranty. Drive tested on an engine test bench.

€550.00

SDS 4041 - Servo Converter - STÖBER

SDS 4041

This variable speed drive for servo motor reference SDS 4041 and brand Stöber is a variable speed drive from the POSIDYN SDS 4000 range. SDS 4041: Three-phase 230...480V, 6A, 4kVA. This Stöber drive is available to replace your defective equipment and has an appropriate warranty. Drive tested on an engine test bench.

€2,310.00

SDS 4071 - Servo Converter - STÖBER

SDS 4071

This variable speed drive for servo motor reference SDS 4071 and brand Stöber is a variable speed drive from the POSIDYN SDS 4000 range. SDS 4071: Three-phase 230...480V, 10A, 7kVA. This Stöber drive is available to replace your defective equipment and has an appropriate warranty. Drive tested on an engine test bench.

€6,180.00

SDS 4101 - Servo Converter - STÖBER

SDS 4101

This variable speed drive for servo motor reference SDS 4101 and brand Stöber is a variable speed drive from the POSIDYN SDS 4000 range. SDS 4101: Three-phase 230...480V, 14A, 10kVA. This Stöber drive is available to replace your defective equipment and has an appropriate warranty. Drive tested on an engine test bench.

€3,980.00

SDS 4141 - Servo Converter - STÖBER

SDS 4141

This variable speed drive for servo motor reference SDS 4141 and brand Stöber is a variable speed drive from the POSIDYN SDS 4000 range. SDS 4141: Three-phase 230...480V, 20A, 14kVA. This Stöber drive is available to replace your defective equipment and has an appropriate warranty. Drive tested on an engine test bench.

€4,830.00

PNOZ m1p - Security module - PILZ

PNOZ m1p

This PNOZ m1p module from the PNOZmulti range is a basic device. Features: 20 inputs, 7 outputs, RS232. This PILZ brand module is at your disposal to replace your defective equipment. Reference : 773100.

€195.00

PNOZ ml2p - Security module - PILZ

PNOZ ml2p

This PNOZ ml2p module from the PNOZmulti range is a link module. Features: for connecting up to 4 PDP67 decentralized modules to a base device This PILZ brand module is at your disposal to replace your defective equipment. Reference : 773602.

€115.00

PNOZ X2P - Security module - PILZ

PNOZ X2P

This PNOZ X2P module from the PNOZmulti range is an emergency stop relay module. Features: 48-240 VAC | 48-240 VDC | Screw terminals This PILZ brand module is at your disposal to replace your defective equipment. Reference: 777303.

€70.00

PNOZ m0p - Security module - PILZ

PNOZ m0p

This PNOZ m0p module from the PNOZmulti range is a basic device. Features: 20 inputs, 7 outputs, RS232. This PILZ brand module is at your disposal to replace your defective equipment. Reference : 773110.

€310.00

PNOZ m0p ETH - Security module - PILZ

PNOZ m0p ETH

This PNOZ m0p ETH module from the PNOZmulti range is a basic device. Features: 20 inputs, 7 outputs, ETHERNET. This PILZ brand module is at your disposal to replace your defective equipment. Reference : 773113.

€125.00

PNOZ m1p ETH - Security module - PILZ

PNOZ m1p ETH

This PNOZ m1p ETH module from the PNOZmulti range is a basic device. Features: 20 inputs, 7 outputs, ETHERNET. This PILZ brand module is at your disposal to replace your defective equipment. Reference : 773103.

€405.00

PNOZ m2p - Security module - PILZ

PNOZ m2p

This PNOZ m2p module from the PNOZmulti range is a basic device. Features: 20 inputs, 7 outputs, RS232. This PILZ brand module is at your disposal to replace your defective equipment. Reference : 773120.

€1,245.00

PNOZ m2p ETH - Security module - PILZ

PNOZ m2p ETH

This PNOZ m2p ETH module from the PNOZmulti range is a basic device. Features: 20 inputs, 7 outputs, ETHERNET. This PILZ brand module is at your disposal to replace your defective equipment. Reference : 773123.

€3,920.00

PNOZ m3p - Security module - PILZ

PNOZ m3p

This PNOZ m3p module from the PNOZmulti range is a basic device. Features: 20 inputs, 7 outputs, ETHERNET. This PILZ brand module is at your disposal to replace your defective equipment. Reference : 773125.

€550.00

PNOZ m3p ETH - Security module - PILZ

PNOZ m3p ETH

This PNOZ m3p ETH module from the PNOZmulti range is a basic device. Features: 20 inputs, 7 outputs, ETHERNET. This PILZ brand module is at your disposal to replace your defective equipment. Reference : 773126.

€550.00

PNOZ ma1p - Expansion module - PILZ

PNOZ ma1p

This PNOZ ma1p module from the PNOZmulti range is an expansion module. Features: 2 analog inputs. This PILZ brand module is at your disposal to replace your defective equipment. Reference: 773812.

€490.00

PNOZ mc0p - Expansion module - PILZ

PNOZ mc0p

This PNOZ mc0p module from the PNOZmulti range is an expansion module. Features: Power supply for supply voltage to fieldbus modules. This PILZ brand module is at your disposal to replace your defective equipment. Reference: 773720.

€90.00

PNOZ mc1p - Expansion module - PILZ

PNOZ mc1p

This PNOZ mc1p module from the PNOZmulti range is an output module. Features: 16 outputs for standard applications. This PILZ brand module is at your disposal to replace your defective equipment. Reference: 773720.

€140.00

PNOZ mc2.1p - Expansion module - PILZ

PNOZ mc2.1p

This PNOZ mc2.1p module from the PNOZmulti range is a bus module. Features: Fieldbus module, EtherCAT This PILZ brand module is at your disposal to replace your defective equipment. Reference: 773713.

€1,400.00

PNOZ mc2p - Expansion module - PILZ

PNOZ mc2p

This PNOZ mc2p module from the PNOZmulti range is a bus module. Features: Fieldbus module, EtherCAT This PILZ brand module is at your disposal to replace your defective equipment. Reference: 773710.

€320.00

PNOZ mc3p - Expansion module - PILZ

PNOZ mc3p

This PNOZ mc3p module from the PNOZmulti range is a bus module. Features: Fieldbus module, PROFIBUS DP This PILZ brand module is at your disposal to replace your defective equipment. Reference: 773732.

€45.00

PNOZ mc4p - Expansion module - PILZ

PNOZ mc4p

This PNOZ mc4p module from the PNOZmulti range is a bus module. Features: Fieldbus module, DeviceNet. This PILZ brand module is at your disposal to replace your defective equipment. Reference: 773711.

€175.00