Drives

Showing 37-72 of 99 item(s)

UNI 4401 - Synchron Controller - CONTROL TECHNIQUES

UNI 4401

This reference CONTROL TECHNIQUES speed controller UNI 4401 is a drive for asynchronous and synchronous motor. Inverter 45 kW, 96A, 380-480V This UNI 4401 speed controller is at your disposal to replace defective equipment and has a guarantee adapted to your needs. Speed controller reconditioned and tested in full load (test of duration) on CONTROL...

€3,990.00

UNI 4402 - Synchron Controller - CONTROL TECHNIQUES

UNI 4402

This reference CONTROL TECHNIQUES speed controller UNI 4402 is a drive for asynchronous and synchronous motor. Inverter 55 kW, 124A, 380-480V This UNI 4402 speed controller is at your disposal to replace defective equipment and has a guarantee adapted to your needs. Speed controller reconditioned and tested in full load (test of duration) on CONTROL...

€3,480.00

UNI 4403 - Synchron Controller - CONTROL TECHNIQUES

UNI 4403

€7,280.00

UNI 4404 - Synchron Controller - CONTROL TECHNIQUES

UNI 4404

This reference CONTROL TECHNIQUES speed controller UNI 4404 is a drive for asynchronous and synchronous motor. Inverter 90 kW, 180A, 380-480V This UNI 4404 speed controller is at your disposal to replace defective equipment and has a guarantee adapted to your needs. Speed controller reconditioned and tested in full load (test of duration) on CONTROL...

€7,480.00

UNI 4405 - Synchron Controller - CONTROL TECHNIQUES

UNI 4405

This reference CONTROL TECHNIQUES speed controller UNI 4405 is a drive for asynchronous and synchronous motor. Inverter 110 kW, 202A, 380-480V This UNI 4405 speed controller is at your disposal to replace defective equipment and has a guarantee adapted to your needs. Speed controller reconditioned and tested in full load (test of duration) on CONTROL...

€7,890.00

UD71 - Communications interface module - CONTROL TECHNIQUES

UD71

This CONTROL TECHNIQUES communication interface module UD71 is a module for the UNIDRIVE range. The UD71 provides the ability to read and write values in the UNIDRIVE drive parameters and can act as a slave module. This CONTROL TECHNIQUES interface module is at your disposal to replace your defective equipment and has a warranty.

€410.00

UMV 4301 8T - Synchron Controller - LEROY SOMER

UMV 4301 8T

This reference LEROY SOMER speed controller UMV 4301 8T is a drive for asynchronous and synchronous motor. Inverter 5,5 kW, 12 A, 380-480V This UMV 4301 8T speed controller is at your disposal to replace defective equipment and has a guarantee adapted to your needs. Speed controller reconditioned and tested in full load (test of duration) on LEROY SOMER...

€1,015.00

UMV 4301 11T - Synchron Controller - LEROY SOMER

UMV 4301 11T

This reference LEROY SOMER speed controller UMV 4301 11T is a drive for asynchronous and synchronous motor. Inverter 7,5 kW, 16 A, 380-480V This UMV 4301 11T speed controller is at your disposal to replace defective equipment and has a guarantee adapted to your needs. Speed controller reconditioned and tested in full load (test of duration) on LEROY...

€1,470.00

UMV 4301 16T - Synchron Controller - LEROY SOMER

UMV 4301 16T

This reference LEROY SOMER speed controller UMV 4301 16T is a drive for asynchronous and synchronous motor. Inverter 11 kW, 25 A, 380-480V This UMV 4301 16T speed controller is at your disposal to replace defective equipment and has a guarantee adapted to your needs. Speed controller reconditioned and tested in full load (test of duration) on LEROY...

€1,685.00

ATV58HU09M2 - Speed drive - TELEMECANIQUE

ATV58HU09M2

This ATV58HU09M2 and SCHNEIDER/TELEMECANIQUE reference speed controller is a variable speed drive for asynchronous motors. ALTIVAR 58 Series Speed Drive: 0.37kW, 2.3A, 1PH, 50 / 60Hz, 200 / 240V, SQUARE D. This ALTIVAR 58 (Schneider Electric) is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€495.00

ATV58HU18N4 - Speed drive - TELEMECANIQUE

ATV58HU18N4

This reference speed drive ATV58HU18N4 and branded SCHNEIDER / TELEMECANIQUE is a variable speed drive for asynchronous motors. ALTIVAR Series 58. Dimmer: 0.75kW, 2.3A, 3PH, 50 / 60Hz, 380 / 500V, SQUARE D. This ALTIVAR 58 (Schneider Electric) is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€465.00

ATV58HU29N4 - Speed drive - TELEMECANIQUE

ATV58HU29N4

This reference speed drive ATV58HU29N4 and branded SCHNEIDER / TELEMECANIQUE is a variable speed drive for asynchronous motors. ALTIVAR Series 58. Speed drive : 1.5kW, 4.1A, 3PH, 50 / 60Hz, 380 / 500V, SQUARE D. This ALTIVAR 58 (Schneider Electric) is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€370.00

ATV58HU54N4 - Speed drive - TELEMECANIQUE

ATV58HU54N4

This ATV58HU54N4 and SCHNEIDER/TELEMECANIQUE reference speed controller is a variable speed drive for asynchronous motors. ALTIVAR 58 Series Speed Drive: 3kW, 7.8A, 3PH, 50/60Hz, 400/460V, SQUARE D. This ALTIVAR 58 (Schneider Electric) is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€750.00

ATV58HU72N4 - Speed drive - TELEMECANIQUE

ATV58HU72N4

This ATV58HU72N4 and SCHNEIDER/TELEMECANIQUE reference speed controller is a variable speed drive for asynchronous motors. ALTIVAR 58 Series Speed Drive: 4kW, 10.5A, 3PH, 50/60Hz, 400/460V, SQUARE D. This ALTIVAR 58 (Schneider Electric) is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€700.00

ATV58HU90N4 - Speed drive - TELEMECANIQUE

ATV58HU90N4

This ATV58HU90N4 and SCHNEIDER/TELEMECANIQUE reference speed controller is a variable speed drive for asynchronous motors. ALTIVAR 58 Series Speed Drive: 5.5kW, 13A, 3PH, 50/60Hz, 400/460V, SQUARE D. This ALTIVAR 58 (Schneider Electric) is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,495.00

ATV58HD16N4 - Speed Drive - TELEMECANIQUE

ATV58HD16N4

This reference controller ATV58HD16N4 and brand SCHNEIDER / TELEMECANIQUE is a variable speed drive for asynchronous motors. ALTIVAR 58 series.Speed drive : 11Kw, 24.2A, 3PH, 50 / 60Hz, 380 / 500V, SQUARE D.This ALTIVAR 58 (Schneider Electric) is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,690.00

ATV58HD23N4 - Speed drive - TELEMECANIQUE

ATV58HD23N4

This reference speed drive ATV58HD23N4 and branded SCHNEIDER / TELEMECANIQUE is a variable speed drive for asynchronous motors. ALTIVAR Series 58. Speed drive : 15Kw, 33A, 3PH, 50/60Hz, 380/500V, SQUARE D. This ALTIVAR 58 (Schneider Electric) is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,950.00

ATV58HD28N4 - Speed drive - TELEMECANIQUE

ATV58HD28N4

This reference speed drive ATV58HD28N4 and branded SCHNEIDER / TELEMECANIQUE is a variable speed drive for asynchronous motors. ALTIVAR Series 58. Speed drive : 18.5Kw, 40.7A, 3PH, 50 / 60Hz, 380 / 500V, SQUARE D. This ALTIVAR 58 (Schneider Electric) is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€2,130.00

ATV58HU29M2 - Speed drive - TELEMECANIQUE

ATV58HU29M2

This reference speed drive ATV58HU29M2 and branded SCHNEIDER / TELEMECANIQUE is a variable speed drive for asynchronous motors. ALTIVAR Series 58. Speed drive : 1.5kW, 7.8, 3PH, 50/60Hz, 200/240V,, SQUARE D. This ALTIVAR 58 (Schneider Electric) is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€470.00

SI-PROFIBUS - Interface module - CONTROL TECHNIQUES

SI-PROFIBUS

This SI-PROFIBUS interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with M200, M300, M400, M600, M700 drives This SI-PROFIBUS Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,250.00

SM-Applications Plus - Interface module - CONTROL TECHNIQUES

SM-Applications Plus

This SM-Applications Plus interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-Applications Plus Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€165.00

SM-CANopen - Interface module - CONTROL TECHNIQUES

SM-CANopen

This SM-CANopen interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-CANopen Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€3,926.00

SM-DEVICENET - Interface module - CONTROL TECHNIQUES

SM-DEVICENET

This SM-DEVICENET interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-DEVICENET Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€130.00

SM-ETHERNET - Interface module - CONTROL TECHNIQUES

SM-ETHERNET

This SM-ETHERNET interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-ETHERNET Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€420.00

SM-EZMOTION - Interface module - CONTROL TECHNIQUES

SM-EZMOTION

This SM-EZMOTION interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Mentor MP drives. This SM-EZMOTION Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€420.00

SM-I/O plus - Interface module - CONTROL TECHNIQUES

SM-I/O plus

This SM-I/O plus interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-I/O plus Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€195.00

SM-Resolver - Interface module - CONTROL TECHNIQUES

SM-Resolver

This SM-Resolver interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-Resolver Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€450.00

SM-PROFIBUS DP - Interface module - CONTROL TECHNIQUES

SM-PROFIBUS DP

This SM-PROFIBUS DP interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-PROFIBUS DP Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€145.00

SM-Universal - Interface module - CONTROL TECHNIQUES

SM-Universal Encoder Plus - Interface module - CONTROL TECHNIQUES

SM-Universal Encoder Plus

This SM-Universal Encoder Plus interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-Universal Encoder Plus Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to...

€140.00

UD50 - option module - CONTROL TECHNIQUES

UD50

This CONTROL TECHNIQUES option module reference UD50 is an I/O module interface for the UNIDRIVE range. The small optional UD50 module is an interface module to be installed in a Unidrive. This UD50 option module is at your disposal in supply or in standard exchange to replace your defective equipment and has a guarantee

€389.00

UD501 - option module - CONTROL TECHNIQUES

UD51 - option module - CONTROL TECHNIQUES

UD51

This CONTROL TECHNIQUES option module reference UD51 is a encoder module interface for the UNIDRIVE range. The small optional UD51 module is an interface module to be installed in a Unidrive. This UD51 option module is at your disposal in supply or in standard exchange to replace your defective equipment and has a guarantee

€195.00

UD70 - Option module - CONTROL TECHNIQUES

UD70

This CONTROL TECHNIQUES option module reference UD70 is a module for the UNIDRIVE range The UD70 is a compact microcomputer contained in a large option module for easy installation in any size Unidrive. This CONTROL TECHNIQUES interface module is available as a supply to replace your defective equipment and has a guarantee

€590.00

SM-Applications - Interface module - CONTROL TECHNIQUES

SM-Applications

This SM-Applications interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-Applications Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€120.00

SM-PROFIBUS DP-V1 - Interface module - CONTROL TECHNIQUES

SM-PROFIBUS DP-V1

This SM-PROFIBUS DP-V1 interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-PROFIBUS DP-V1 Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€145.00

UD73 - Option module - CONTROL TECHNIQUES

UD73

This CONTROL TECHNIQUES option module reference UD73 is a module for the UNIDRIVE range The UD73 is a compact microcomputer contained in a large option module for easy installation in any size Unidrive. This CONTROL TECHNIQUES interface module is available as a supply to replace your defective equipment and has a guarantee

€1,960.00

SM-Encoder Plus - Interface module - CONTROL TECHNIQUES

SM-Encoder Plus

This SM-Encoder Plus interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-Encoder Plus Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€180.00