Catalog

Showing 1-36 of 240 item(s)

JZNC-XPP02B - Teach Pendant - YASKAWA

JZNC-XPP02B

This Teach Pendant YASKAWA and reference JZNC-XPP02B is used for the robots XRC MOTOMAN / Yasnac Easy multi-language interface and high performance thanks to its RISC processor. This Teach Pendant YASKAWA is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€2,100.00

A06B-6105-H003 - Servo Amplifier - FANUC

A06B-6105-H003

6-axis drive for F-200iB/M-6iB/ArcMate 100iB robot (or other compatible model). KUKA, ABB... Input : 200-240V 1,5kW. Output : 6x13AIncludes a 6-axis A16B-2000-0063/06C power board, and a servo control board A16B-3200-0440/04CThis A06B-6105-H003 drive is at your disposal to replace your defective hardware and has a warranty adapted to your needs.

€3,420.00

JUSP-WS30AB - Amplifier - YASKAWA

JUSP-WS30AB

This JUSP-WS30AB and YASKAWA drive is a controller for XRC robot control unit. 2,2 kW Amplifier for Servopack CACR-SK45AAB and CACR-SK16MAAB. This JUSP-WS30AB YASKAWA drive is at your disposal to replace your defective equipment and has a warranty adapted to your needs.

€950.00

JANCD-XEW01-1 - Control board - YASKAWA

JANCD-XEW01-1

This control board JANCD-XEW01-1 and brand YASKAWA is a control board for XRC robot control unit. XEW01-01: Analog output x 3 ports + Status signal Input of a welder This JANCD-XEW01-1 YASKAWA card is at your disposal to replace your defective hardware and has a warranty adapted to your needs.

€370.00

JANCD-MFB01-1 - Control board - YASKAWA

JANCD-MFB01-1

This interface board JANCD-MFB01-1 and YASKAWA is an interface board for XRC robot control unit. Fieldbus system via standard AnyBus modules This JANCD-MFB01-1 YASKAWA interface board is available to replace your defective equipment and has a guarantee adapted to your needs.

€640.00

JARCR-XEB01-1 - Backboard Card - YASKAWA

JARCR-XEB01-1

This expansion card JANCD-XEB01-1 and brand YASKAWA is an expansion card for XRC robot control unit. Backboard card for JANCD-MFB01 This JANCD-XEB01-1 YASKAWA card is at your disposal to replace your defective hardware and has a warranty adapted to your needs.

€380.00

JZRCR-XSU02 - Servo Controller - YASKAWA

JZRCR-XSU02

This drive JZRCR-XSU02 and YASKAWA is a drive for XRC robot control unit. For type: SV3X, UP6, S16X, UP20, UP50, UP20M, SK45X, SK16MX, SP70X .. This YASKAWA JZRCR-XSU02 drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€640.00

A05B-2301-C332 - Teach Pendant - FANUC

A05B-2301-C332

This Fanuc branded reference box A05B-2301-C332 is at your disposal. This Teach Pendant, for Robot FANUC working with controller R-J3, makes possible the programming and all the control operations and others of the robots FANUC. This FANUC teach reconditioned and tested on FANUC robot.

€1,740.00

A05B-2400-C900 - Cooling Unit - FANUC

A05B-2400-C900

This Fanuc cooling unit of reference A05B-2400-C900 is at your disposal. This unit is used for FANUC Robot running with R-J3 controller, Cooling unit reconditioned and tested on FANUC robot.

€230.00

JUSP-ACP05JAB - Converter - YASKAWA

JUSP-ACP05JAB

This YASKAWA converter is composed of 2 modules: JUSP-ACP05JAB. It is used in CACR-SV3AAA servopacks, CACR-UP6AAC, CACR-SK16AAC, CACR-UP20AAA. Capacity of 5A. This YASKAWA converter is at your disposal to replace your defective equipment. It is sold with a guarantee of operation adapted to your needs.

€1,180.00

A16B-3200-0450 - CPU Board - FANUC

A16B-3200-0450/07G

This FANUC CPU board reference A16B-3200-0450/07G is designed to equip FANUC robots. This CPU LR-Mate card is used to integrate the CPU module, the axis card and the From/Sram module. This card A16B-3200-0450 is at your disposal to replace your defective equipment and has a guarantee of operation adapted to your needs.

€540.00

JUSP-WSCA01AA + JUSP-WSCB01AA - Amplifier - YASKAWA

JUSP-WSCA01AA + JUSP-WSCB01AA

This amplifier JUSP-WSCA01AA + JUSP-WSCB01AA and YASKAWA is a amplifier for XRC robot control unit. 100W Amplifier for Servopack CACR-UP6AAC, CACR-SV3AAA This amplifier JUSP-WSCA01AA + JUSP-WSCB01AA is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€320.00

JUSP-WSCB05AA + JUSP-WSCA05AA + JUSP-WSCD05AA - Amplifier - YASKAWA

JUSP-WSCB05AA+WSCA05AA+WSCD05AA

This amplifier JUSP-WSCB05AA + JUSP-WSCA05AA + JUSP-WSCD05AA and YASKAWA brand is a drive for XRC robot control unit. 500W Amplifier for Servopack CACR-UP6AAC, CACR-SV3AAA This amplifier JUSP-WSCB05AA + JUSP-WSCA05AA + JUSP-WSCD05AA is at your disposal to replace your defective hardware.

€310.00

JUSP-WSCD10AA+JUSP-WSCA10AA+JUSP-WSCB10AA - Amplifier - YASKAWA

JUSP-WSCD10AA+WSCA10AA+WSCB10AA

This amplifier JUSP-WSCD10AA+JUSP-WSCA10AA+JUSP-WSCB10AA and YASKAWA brand is a drive for XRC robot control unit. 1kW Amplifier for Servopack CACR-UP6AAC, CACR-SV3AAA This amplifier JUSP-WSCD10AA+JUSP-WSCA10AA+JUSP-WSCB10AA is at your disposal to replace your defective hardware.

€640.00

JUSP-WSCB05AA + JUSP-WSCB05AA + JUSP-WSCD10AA - Amplifier - YASKAWA

JUSP-WSCB05AA+WSCB05AA+WSCD10AA

This amplifier JUSP-WSCB05AA + JUSP-WSCB05AA + JUSP-WSCD10AA and YASKAWA brand is a drive for XRC robot control unit. 500W Amplifier for Servopack CACR-UP6AAC, CACR-SV3AAA This amplifier JUSP-WSCB05AA + JUSP-WSCB05AA + JUSP-WSCD10AA is at your disposal to replace your defective hardware.

€410.00

JUSP-ACPA05JAA + JUSP-ACPCB05JAA - Converter - YASKAWA

JUSP-ACPA05JAA + JUSP-ACPCB05JAA

This YASKAWA converter is composed of 2 modules: JUSP-ACPA05JAA + JUSP-ACPCB05JAA. It is used in CACR-SV3AAA servopacks, CACR-UP6AAC, CACR-SK16AAC, CACR-UP20AAA. Capacity of 5A. This YASKAWA converter is at your disposal to replace your defective equipment. It is sold with a guarantee of operation adapted to your needs.

€920.00

JUSP-RCP01AAC - Power Supply Module - YASKAWA

JUSP-RCP01AAC

This YASKAWA power supply module is reference JUSP-RCP01AAC. It is used several YASKAWA servopacks. This power supply module generates a DC power supply (+ 5V, + 7V, ± 15V) for servo control. The AC input (single phase: 200/220 VAC) is provided by the power supply. This YASKAWA module is at your disposal to replace your defective equipment.

€420.00

JANCD-XCP01-1 - CPU Control Board - YASKAWA

JANCD-XCP01-1

YASKAWA CPU and reference card JANCD-XCP01-1 is used with the XRC MOTOMAN controller. Includes JANCD-XIF03-1 and JANCD-XMM01-2 cards This CPU JANCD-XCP01-1 is at your disposal to replace your defective equipment and has a guarantee of operation adapted to your needs.

€1,050.00

CPS-150F - Power Supply - YASKAWA

CPS-150F

This YASKAWA/YASNAC CN05 and CPS-150F Power Supply is used for the NX100 and XRC MOTOMAN series. Input voltage - 200-230 V AC, frequency - 50/60 Hz, current - 2.1 A This CPS-150F power supply is at your disposal to replace your defective equipment and has a guarantee of operation adapted to your needs.

€940.00

JZNC-XRK01B-1 - CPU Rack - YASKAWA

JZNC-XRK01B-1

This JZNC-XRK01B-1 reference and YASKAWA brand rack is for YASNAC XRC. The CPU Rack (JZNC-XRK01X-X) does not include any cards. BLANK RACK. This rack JZNC-XRK01B-1 is at your disposal to replace your defective equipment and has a guarantee of operation adapted to your needs.

€290.00

A16B-2203-0370 - Power Supply Unit - FANUC

A16B-2203-0370

This FANUC power supply board is part number A16B-2203-0370. It is installed on FANUC RJ3 Robot. This FANUC card is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Card reconditioned and tested on bench manufacturer (Test 100%).

€410.00

A16B-3200-0330 - CPU Board - FANUC

A16B-3200-0330

This FANUC CPU board is part number A16B-3200-0330. It is installed on FANUC RJ3 Robot. This CPU card is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Card reconditioned and tested on bench manufacturer (Test 100%).

€400.00

A16B-2203-0764 - Process I/O HE - FANUC

A16B-2203-0764

This FANUC I/O process board is part number A16B-2203-0764. It is installed on FANUC RJ3 Robot. This FANUC card is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Card reconditioned and tested on bench manufacturer (Test 100%).

€6,350.00

A16B-3200-0042 - CPU Board - FANUC

A16B-3200-0042

This FANUC CPU board reference A16B-3200-0042 is designed to equip FANUC robots. This CPU LR-Mate card is used to integrate the CPU module, the axis card and the From/Sram module. This card A16B-3200-0042 is at your disposal to replace your defective equipment and has a guarantee of operation adapted to your needs.

€670.00

A20B-2100-0770 - Operator Panel PC Board - FANUC

A20B-2100-0770

This FANUC reference board A20B-2100-0770 is used for FANUC R-j3iB robots. LED: communication status with the main boardON NormalOFF Communication errorPON: Illuminates normally when the internal power supply of the panel board produces + 5V. This FANUC control board is sold with a guarantee of operation.

€1,249.00

A05B-2301-C305 - Teach Pendant - FANUC

A05B-2301-C305

This Fanuc branded reference box A05B-2301-C305 is at your disposal. This Teach Pendant, for Robot FANUC working with controller R-J3, makes possible the programming and all the control operations and others of the robots FANUC. This FANUC teach is reconditioned and tested on FANUC robot.

€895.00

A16B-2100-0200 - Control board - FANUC

A16B-2100-0200

This FANUC reference board A16B-2100-0200 is designed to equip the FANUC A06B-6100-H002 drives. This FANUC control board is used to control the A06B-6100-H002 drive installed on FANUC RJ3 robots. This card A16B-2100-0200 is at your disposal to replace your defective equipment and has a guarantee of operation adapted to your needs.

€1,560.00

JUSP-ACP05JAA + JUSP-ACPCB05JAA - Converter - YASKAWA

JUSP-ACP05JAA + JUSP-ACPCB05JAA

This YASKAWA converter is composed of 2 modules: JUSP-ACP05JAA + JUSP-ACPCB05JAA. It is used in CACR-SV3AAA servopacks, CACR-UP6AAC, CACR-SK16AAC, CACR-UP20AAA. Capacity of 5A. This YASKAWA converter is at your disposal to replace your defective equipment. It is sold with a guarantee of operation adapted to your needs.

€920.00

X20AI1744 - Analog input module - B&R

X20AI1744

This B&R analog input module is reference X20AI1744. It belongs to the X20 range. 1 full bridge strain gauge input, 24-bit converter resolution. 5 kHz input filter This B&R input module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€580.00

X20AI2622 - Analog input module - B&R

X20AI2622

This B&R analog input module is reference X20AI2622. It belongs to the X20 range. • 2 analog inputs • Either current or voltage signal • 13-bit digital converter resolution This B&R input module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€280.00

X20AI4622 - Analog input module - B&R

X20AI4622

This B&R analog input module is reference X20AI4622. It belongs to the X20 range. • 2 analog inputs • Either current or voltage signal • 13-bit digital converter resolution This B&R input module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€160.00

X20BM11 - Bus module - B&R

X20BM11

This B&R bus module is reference X20BM11. It belongs to the X20 range. The BM11 bus module serves as the base for all 24 VDC X20 I/O modules. • Bus module for 24 VDC I/O modules • The internal I/O supply is inter connected This B&R bus module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€39.00

X20BT9100 - Bus transmitter - B&R

X20BT9100

This B&R bus transmitter is reference X20BT9100. It belongs to the X20 range. The bus transmitter BT9100 provides for the seamless expansion of the X20 system. The stations can be up to 100m away from each other. • X2X Link bus transmitter • For seamless expansion of the systems • Up to 100 m segment lengths • Feed for internal I/O power supply This...

€89.00

X20ZF0000 - Dummy Module - B&R

X20ZF0000

This B&R dummy module is reference X20BT9100. It belongs to the X20 range. • Place holder for later system expansion • Used as a terminal holder • Module with no electrical function This B&R dummy module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€85.00

X20IF2772 - Interface Module - B&R

X20IF2772

This B&R interface module is reference X20IF2772. It belongs to the X20 range. X20 interface module, 2 CAN bus interfaces, max. 1 Mbit/s, electrically isolated, order 2x terminal block TB2105 separately This B&R module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€660.00

X20IF1020 - Interface Module - B&R

X20IF1020

This B&R interface module is reference X20IF1020. It belongs to the X20 range. X20 interface module, 1 RS232 interface, max. 115.2 kbit/s, electrically isolated This B&R module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€620.00