Catalog

Showing 1-36 of 88 item(s)

JZNC-XPP02B - Teach Pendant - YASKAWA

JZNC-XPP02B

This Teach Pendant YASKAWA and reference JZNC-XPP02B is used for the robots XRC MOTOMAN / Yasnac Easy multi-language interface and high performance thanks to its RISC processor. This Teach Pendant YASKAWA is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€2,100.00

JUSP-WS30AB - Amplifier - YASKAWA

JUSP-WS30AB

This JUSP-WS30AB and YASKAWA drive is a controller for XRC robot control unit. 2,2 kW Amplifier for Servopack CACR-SK45AAB and CACR-SK16MAAB. This JUSP-WS30AB YASKAWA drive is at your disposal to replace your defective equipment and has a warranty adapted to your needs.

€950.00

JANCD-XEW01-1 - Control board - YASKAWA

JANCD-XEW01-1

This control board JANCD-XEW01-1 and brand YASKAWA is a control board for XRC robot control unit. XEW01-01: Analog output x 3 ports + Status signal Input of a welder This JANCD-XEW01-1 YASKAWA card is at your disposal to replace your defective hardware and has a warranty adapted to your needs.

€370.00

JANCD-MFB01-1 - Control board - YASKAWA

JANCD-MFB01-1

This interface board JANCD-MFB01-1 and YASKAWA is an interface board for XRC robot control unit. Fieldbus system via standard AnyBus modules This JANCD-MFB01-1 YASKAWA interface board is available to replace your defective equipment and has a guarantee adapted to your needs.

€640.00

JARCR-XEB01-1 - Backboard Card - YASKAWA

JARCR-XEB01-1

This expansion card JANCD-XEB01-1 and brand YASKAWA is an expansion card for XRC robot control unit. Backboard card for JANCD-MFB01 This JANCD-XEB01-1 YASKAWA card is at your disposal to replace your defective hardware and has a warranty adapted to your needs.

€380.00

JZRCR-XSU02 - Servo Controller - YASKAWA

JZRCR-XSU02

This drive JZRCR-XSU02 and YASKAWA is a drive for XRC robot control unit. For type: SV3X, UP6, S16X, UP20, UP50, UP20M, SK45X, SK16MX, SP70X .. This YASKAWA JZRCR-XSU02 drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€640.00

JUSP-ACP05JAB - Converter - YASKAWA

JUSP-ACP05JAB

This YASKAWA converter is composed of 2 modules: JUSP-ACP05JAB. It is used in CACR-SV3AAA servopacks, CACR-UP6AAC, CACR-SK16AAC, CACR-UP20AAA. Capacity of 5A. This YASKAWA converter is at your disposal to replace your defective equipment. It is sold with a guarantee of operation adapted to your needs.

€1,180.00

JUSP-WSCA01AA + JUSP-WSCB01AA - Amplifier - YASKAWA

JUSP-WSCA01AA + JUSP-WSCB01AA

This amplifier JUSP-WSCA01AA + JUSP-WSCB01AA and YASKAWA is a amplifier for XRC robot control unit. 100W Amplifier for Servopack CACR-UP6AAC, CACR-SV3AAA This amplifier JUSP-WSCA01AA + JUSP-WSCB01AA is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€320.00

JUSP-WSCB05AA + JUSP-WSCA05AA + JUSP-WSCD05AA - Amplifier - YASKAWA

JUSP-WSCB05AA+WSCA05AA+WSCD05AA

This amplifier JUSP-WSCB05AA + JUSP-WSCA05AA + JUSP-WSCD05AA and YASKAWA brand is a drive for XRC robot control unit. 500W Amplifier for Servopack CACR-UP6AAC, CACR-SV3AAA This amplifier JUSP-WSCB05AA + JUSP-WSCA05AA + JUSP-WSCD05AA is at your disposal to replace your defective hardware.

€310.00

JUSP-WSCD10AA+JUSP-WSCA10AA+JUSP-WSCB10AA - Amplifier - YASKAWA

JUSP-WSCD10AA+WSCA10AA+WSCB10AA

This amplifier JUSP-WSCD10AA+JUSP-WSCA10AA+JUSP-WSCB10AA and YASKAWA brand is a drive for XRC robot control unit. 1kW Amplifier for Servopack CACR-UP6AAC, CACR-SV3AAA This amplifier JUSP-WSCD10AA+JUSP-WSCA10AA+JUSP-WSCB10AA is at your disposal to replace your defective hardware.

€640.00

JUSP-WSCB05AA + JUSP-WSCB05AA + JUSP-WSCD10AA - Amplifier - YASKAWA

JUSP-WSCB05AA+WSCB05AA+WSCD10AA

This amplifier JUSP-WSCB05AA + JUSP-WSCB05AA + JUSP-WSCD10AA and YASKAWA brand is a drive for XRC robot control unit. 500W Amplifier for Servopack CACR-UP6AAC, CACR-SV3AAA This amplifier JUSP-WSCB05AA + JUSP-WSCB05AA + JUSP-WSCD10AA is at your disposal to replace your defective hardware.

€410.00

JUSP-ACPA05JAA + JUSP-ACPCB05JAA - Converter - YASKAWA

JUSP-ACPA05JAA + JUSP-ACPCB05JAA

This YASKAWA converter is composed of 2 modules: JUSP-ACPA05JAA + JUSP-ACPCB05JAA. It is used in CACR-SV3AAA servopacks, CACR-UP6AAC, CACR-SK16AAC, CACR-UP20AAA. Capacity of 5A. This YASKAWA converter is at your disposal to replace your defective equipment. It is sold with a guarantee of operation adapted to your needs.

€920.00

JUSP-RCP01AAC - Power Supply Module - YASKAWA

JUSP-RCP01AAC

This YASKAWA power supply module is reference JUSP-RCP01AAC. It is used several YASKAWA servopacks. This power supply module generates a DC power supply (+ 5V, + 7V, ± 15V) for servo control. The AC input (single phase: 200/220 VAC) is provided by the power supply. This YASKAWA module is at your disposal to replace your defective equipment.

€420.00

JANCD-XCP01-1 - CPU Control Board - YASKAWA

JANCD-XCP01-1

YASKAWA CPU and reference card JANCD-XCP01-1 is used with the XRC MOTOMAN controller. Includes JANCD-XIF03-1 and JANCD-XMM01-2 cards This CPU JANCD-XCP01-1 is at your disposal to replace your defective equipment and has a guarantee of operation adapted to your needs.

€1,050.00

CPS-150F - Power Supply - YASKAWA

CPS-150F

This YASKAWA/YASNAC CN05 and CPS-150F Power Supply is used for the NX100 and XRC MOTOMAN series. Input voltage - 200-230 V AC, frequency - 50/60 Hz, current - 2.1 A This CPS-150F power supply is at your disposal to replace your defective equipment and has a guarantee of operation adapted to your needs.

€940.00

JZNC-XRK01B-1 - CPU Rack - YASKAWA

JZNC-XRK01B-1

This JZNC-XRK01B-1 reference and YASKAWA brand rack is for YASNAC XRC. The CPU Rack (JZNC-XRK01X-X) does not include any cards. BLANK RACK. This rack JZNC-XRK01B-1 is at your disposal to replace your defective equipment and has a guarantee of operation adapted to your needs.

€290.00

On sale!

S30A-4011CA - Laser Scanner - SICK

S30A-4011CA

This S3000 series laser scanner has four protection fields and four servo fields that are freely programmable using your SICK software. You can therefore configure your laser scanner according to the conditions of your installation. This SICK S30A-4011CA scanner is at your disposal to replace your defective equipment.

€2,585.00

S30A-4011BA - Laser Scanner - SICK

S30A-4011BA

This S3000 Series safety laser scanner features 1 protective field set and four servo fields that are freely programmable using your SICK software. You can therefore configure your laser scanner according to the conditions of your installation. Protective Field range : 4 meters This SICK S30A-4011BA scanner is at your disposal to replace your defective...

€2,220.00

S30A-7011CA - Laser Scanner - SICK

S30A-7011CA

This S3000 series safety laser scanner features 4 protective field sets and 12 control fields that are freely programmable using your SICK software. You can therefore configure your laser scanner according to the conditions of your installation. Protective Field range : 7 m. This SICK S30A-7011CA scanner is at your disposal to replace your defective...

€715.00

S30A-6011EA - Laser Scanner - SICK

S30A-6011EA

This safety laser scanner can only be used in combination with the EFI system group, eg. with a Flexi Soft safety control system or another S300 or S3000 safety laser scanner. Range: 5.5 m This SICK S30A-6011EA scanner is at your disposal to replace your defective equipment.

€2,560.00

S30A-7011EA - Laser Scanner - SICK

S30A-7011EA

This S3000 Series safety laser scanner features 1 protective field set and 64 servo fields that are freely programmable using your SICK software. You can therefore configure your laser scanner according to the conditions of your installation. Protective Field range : 7 meters This SICK S30A-7011EA scanner is at your disposal to replace your defective...

€890.00

A06B-6140-H006 - Power Supply Module - FANUC

A06B-6140-H006

This power supply module A06B-6140-H006 Alpha Fanuc is at your disposal. FANUC αi PS 5.5 range, category : αi PS series. Input: 200-240V, 26A, 50.60Hz, 3-ph. Output: 283-339V, 6.8kW This Alpha Fanuc A06B-6140-H006 power supply module is sold with a warranty. Reconditioned power supply and tested under full load (test duration) on FANUC bench

€1,560.00

A06B-6150-H011 - Power Supply Module - FANUC

A06B-6150-H011

This power supply module A06B-6150-H011 Alpha Fanuc is at your disposal. FANUC αi PS 11HV range, category : αi PS series. Input : 400-480V, 24A, 50,60Hz, 3-ph. Output : 565-679V, 13kW This Alpha Fanuc A06B-6150-H011 power supply module is sold with a warranty. Reconditioned power supply and tested under full load (test duration) on FANUC bench

€2,430.00

CM150DU-24F - IGBT Power module - MITSUBISHI

CM150DU-24F

This MITSUBISHI power module reference CM150DU-24F is part of the range F SERIES MITSUBISHI CM150DU-24F : 1200V, 150A, 600W, Isolated Type, High Power Switching This power module CM150DU-24F is at your disposal in supply to replace your defective module and has a guarantee adapted to your needs. New power module.

€115.00

CM50DU-24F - IGBT Power module - MITSUBISHI

CM50DU-24F

This MITSUBISHI power module reference CM50DU-24F is part of the range F SERIES MITSUBISHI CM50DU-24F : 1200V, 50A, 320W, Isolated Type, High Power Switching This power module CM50DU-24F is at your disposal in supply to replace your defective module and has a guarantee adapted to your needs. New power module.

€86.00

CM75DU-24F - IGBT Power module - MITSUBISHI

CM75DU-24F

This MITSUBISHI power module reference CM75DU-24F is part of the range F SERIES MITSUBISHI CM75DU-24F : 1200V, 75A, 450W, Isolated Type, High Power Switching This power module CM75DU-24F is at your disposal in supply to replace your defective module and has a guarantee adapted to your needs. New power module.

€92.00

CM100DU-24F - IGBT Power module - MITSUBISHI

CM100DU-24F

This MITSUBISHI power module reference CM100DU-24F is part of the range F SERIES MITSUBISHI CM100DU-24F : 1200V, 100A, 500W, Isolated Type, High Power Switching This power module CM100DU-24F is at your disposal in supply to replace your defective module and has a guarantee adapted to your needs. New power module.

€99.00

CM200DU-24F - IGBT Power module - MITSUBISHI

CM200DU-24F

This MITSUBISHI power module reference CM200DU-24F is part of the range F SERIES MITSUBISHI CM200DU-24F : 1200V, 200A, 830W, Isolated Type, High Power Switching This power module CM200DU-24F is at your disposal in supply to replace your defective module and has a guarantee adapted to your needs. New power module.

€132.00

CM300DU-24F - IGBT Power module - MITSUBISHI

CM300DU-24F

This MITSUBISHI power module reference CM300DU-24F is part of the range F SERIES MITSUBISHI CM300DU-24F : 1200V, 300A, 960W, Isolated Type, High Power Switching This power module CM300DU-24F is at your disposal in supply to replace your defective module and has a guarantee adapted to your needs. New power module.

€270.00

A06B-6140-H011 - Power Supply Module - FANUC

A06B-6140-H011

This power supply module A06B-6140-H011 Alpha Fanuc is at your disposal. FANUC αi PS 11 range, category : αi PS series. Input: 200-240V, 49A, 50.60Hz, 3-ph. Output: 283-339V, 13.2kW This Alpha Fanuc A06B-6140-H011 power supply module is sold with a warranty. Reconditioned power supply and tested under full load (test duration) on FANUC bench

€1,860.00

A06B-6110-H006 - Power Supply Module - FANUC

A06B-6110-H006

This power supply module A06B-6110-H006 Alpha Fanuc is at your disposal. FANUC αi PS 5.5 range, category : αi PS series. Input: 200-240V, 26A, 50.60Hz, 3-ph. Output: 283-339V, 6.8kW This Alpha Fanuc A06B-6110-H006 power supply module is sold with a warranty. Reconditioned power supply and tested under full load (test duration) on FANUC bench

€1,560.00

A06B-6140-H015 - Power Supply Module - FANUC

A06B-6140-H015

This power supply module A06B-6140-H015 Alpha Fanuc is at your disposal. FANUC αi PS 15 range, category : αi PS series. Input: 200-240V, 63A, 50.60Hz, 3-ph. Output: 283-339V, 17.5kW This Alpha Fanuc A06B-6140-H015 power supply module is sold with a warranty. Reconditioned power supply and tested under full load (test duration) on FANUC bench

€2,080.00

A06B-6140-H026 - Power Supply Module - FANUC

A06B-6140-H026

This power supply module A06B-6140-H026 Alpha Fanuc is at your disposal. FANUC αi PS 26 range, category : αi PS series. Input: 200-240V, 106A, 50.60Hz, 3-ph. Output: 283-339V, 29.8kW This Alpha Fanuc A06B-6140-H026 power supply module is sold with a warranty. Reconditioned power supply and tested under full load (test duration) on FANUC bench

€4,860.00

A06B-6140-H030 - Power Supply Module - FANUC

A06B-6140-H030

This power supply module A06B-6140-H030 Alpha Fanuc is at your disposal. FANUC αi PS 30 range, category : αi PS series. Input: 200-240V, 127A, 50.60Hz, 3-ph. Output: 283-339V, 35kW This Alpha Fanuc A06B-6140-H030 power supply module is sold with a warranty. Reconditioned power supply and tested under full load (test duration) on FANUC bench

€2,450.00

A06B-6140-H037 - Power Supply Module - FANUC

A06B-6140-H037

This power supply module A06B-6140-H037 Alpha Fanuc is at your disposal. FANUC αi PS 37 range, category : αi PS series. Input: 200-240V, 153A, 50.60Hz, 3-ph. Output: 283-339V, 43kW This Alpha Fanuc A06B-6140-H037 power supply module is sold with a warranty. Reconditioned power supply and tested under full load (test duration) on FANUC bench

€3,100.00

A06B-6140-H055 - Power Supply Module - FANUC

A06B-6140-H055

This power supply module A06B-6140-H055 Alpha Fanuc is at your disposal. FANUC αi PS 55 range, category : αi PS series. Input: 200-240V, 228A, 50.60Hz, 3-ph. Output: 283-339V, 65kW This Alpha Fanuc A06B-6140-H055 power supply module is sold with a warranty. Reconditioned power supply and tested under full load (test duration) on FANUC bench

€4,120.00