Catalog

Showing 1-36 of 50 item(s)

On sale!

S30A-4011CA - Laser Scanner - SICK

S30A-4011CA

This S3000 series laser scanner has four protection fields and four servo fields that are freely programmable using your SICK software. You can therefore configure your laser scanner according to the conditions of your installation. This SICK S30A-4011CA scanner is at your disposal to replace your defective equipment.

€2,585.00

1769-L33ER - Processor - ALLEN BRADLEY

1769-L33ER

This processor ALLEN BRADLEY 1769-L33ER is part of the range CompactLogix 5370 Controllers. 2 MB, 4.5W Current draw @ 5V DC, controller power: 500 mA Current draw @ 24V DC, controller power: 225 mA This processor is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,620.00

1769-L16ER-BB1B - Processor - ALLEN BRADLEY

1769-L16ER-BB1B

This ALLEN BRADLEY 1769-L16ER-BB1B processor is part of the CompactLogix 5370 Controllers family. 16 inputs / 24V DC sink 50V DC (continuous), Basic Insulation Type.Tested at 500V AC for 60s, system to field. No isolation between individual channels This processor is at your disposal to replace your defective equipment and has a guarantee adapted to your...

€1,020.00

S30A-4011BA - Laser Scanner - SICK

S30A-4011BA

This S3000 Series safety laser scanner features 1 protective field set and four servo fields that are freely programmable using your SICK software. You can therefore configure your laser scanner according to the conditions of your installation. Protective Field range : 4 meters This SICK S30A-4011BA scanner is at your disposal to replace your defective...

€2,220.00

S30A-7011CA - Laser Scanner - SICK

S30A-7011CA

This S3000 series safety laser scanner features 4 protective field sets and 12 control fields that are freely programmable using your SICK software. You can therefore configure your laser scanner according to the conditions of your installation. Protective Field range : 7 m. This SICK S30A-7011CA scanner is at your disposal to replace your defective...

€715.00

TSXP47455R - Interface Processor - TELEMECANIQUE

TSXP47455R

This TELEMECANIQUE and reference TSXP47455R processor card belongs to the Series 7 range. Module for TSX47-40 range Fipio / Fipway version 5.8 This Telemecanique TSXP47455R module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Refurbished and fully loaded power supply (time test) on TELEMECANIQUE bench.

€310.00

TSXRKD8FP - Rack - TELEMECANIQUE

TSXRKD8FP

This TELEMECANIQUE rack is reference TSXRKD8FP. It is part of the Series 7 range. UC rack (8 + 8) not venile. CPU Rack (8 + 8) no. fans. This TELEMECANIQUE rack is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Reconditioned rack and tested on automaton bench (Test 100%).

€495.00

TSXDST1682 - Output Module - TELEMECANIQUE

TSXDST1682

This TELEMECANIQUE digital output module is reference TSXDST1682. It is part of the TSX Series 7. 24 volts c.c. / static protected. 16 outputs. This TELEMECANIQUE output module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Module reconditioned and tested on a test bench (100% test).

€60.00

TSXP673 - Interface Processor - TELEMECANIQUE

TSXP673

This TELEMECANIQUE brand and TSXP673 reference processor card belongs to the TSX Series 7 range. Module for TSX67-30 Series Processor V: 2.30 This TELEMECANIQUE TSXP673 module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Module reconditioned and tested on a test bench (100% test).

€1,185.00

TSXP47420 - Interface Processor - TELEMECANIQUE

TSXP47420

This TELEMECANIQUE brand and TSXP47420 reference processor card belongs to the TSX Series 7 range. Module for TSX47-40 range version 4.3. Integrated unit link. 48k of internal RAM. 64k cartridge. This Télémécanique TSXP47420 module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€510.00

TSXSCM2116 - Communication Coupler - TELEMECANIQUE

TSXSCM2116

This TELEMECANIQUE communication module is reference TSXSCM2116. It is part of the TSX Series 7 series. Channel 0: Isolated RS232 C, Channel 1: UNI-TELWAY. This TELEMECANIQUE communication module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Module reconditioned and tested on a test bench (100% test).

€430.00

TSXMAPCPC742 - PC-Mapway board - TELEMECANIQUE

TSXMAPCPC742

This TELEMECANIQUE network coupler board is reference TSXMAPCPC742. It is part of the TSX Series 7 range. Used for the FTX 507 workstation. This TELEMECANIQUE network coupler module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Module reconditioned and tested on a test bench (100% test).

€1,065.00

TSXAXM162 - Axial command coupler - TELEMECANIQUE

TSXAXM162

This TELEMECANIQUE axial control coupler is reference TSXAXM162. It is part of the TSX Series 7 series. For MODICON TSX, analog, 3 inputs; 24VDC, 5 outputs. This TELEMECANIQUE axial command coupleur is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Module reconditioned and tested on a test bench (100% test).

€850.00

S30A-6011EA - Laser Scanner - SICK

S30A-6011EA

This safety laser scanner can only be used in combination with the EFI system group, eg. with a Flexi Soft safety control system or another S300 or S3000 safety laser scanner. Range: 5.5 m This SICK S30A-6011EA scanner is at your disposal to replace your defective equipment.

€2,560.00

S30A-7011EA - Laser Scanner - SICK

S30A-7011EA

This S3000 Series safety laser scanner features 1 protective field set and 64 servo fields that are freely programmable using your SICK software. You can therefore configure your laser scanner according to the conditions of your installation. Protective Field range : 7 meters This SICK S30A-7011EA scanner is at your disposal to replace your defective...

€890.00

MR-J2-60C - Servo Amplifier - MITSUBISHI

MR-J2-60C

This MITSUBISHI servo amplifier, reference MR-J2-60C is an AC servo drive. It belongs to the MELSERVO-J2-Series. 0,6 kW Mitsubishi AC servo drive for HA-FF63, HC-SF52, HC-SF53 servo motors. This MR-J2-60C servo amplifier is at your disposal to replace your defective equipment and has a warranty adapted to your needs. Servo amplifier 100% tested on...

€860.00

MR-J2-10C - Servo Amplifier - MITSUBISHI

MR-J2-10C

This MITSUBISHI servo amplifier, reference MR-J2-10C is an AC servo drive. It belongs to the MELSERVO-J2-Series. 0,1 kW Mitsubishi AC servo drive for HC-MF053, HC-MF13, HA-FF053, HA-FF13, HC-UF13 servo motors. This MR-J2-10C servo amplifier is at your disposal to replace your defective equipment and has a warranty adapted to your needs. Servo amplifier...

€480.00

MR-J2-20C - Servo Amplifier - MITSUBISHI

MR-J2-20C

This MITSUBISHI servo amplifier, reference MR-J2-20C is an AC servo drive. It belongs to the MELSERVO-J2-Series. 0,2 kW Mitsubishi AC servo drive for HC-MF23, HA-FF23, HC-UF23 servo motors. This MR-J2-20C servo amplifier is at your disposal to replace your defective equipment and has a warranty adapted to your needs. Servo amplifier 100% tested on...

€640.00

MR-J2-40C - Servo Amplifier - MITSUBISHI

MR-J2-40C

This MITSUBISHI servo amplifier, reference MR-J2-40C is an AC servo drive. It belongs to the MELSERVO-J2-Series. 0,4 kW Mitsubishi AC servo drive for HC-MF43, HA-FF33, HA-FF43, HC-UF43 servo motors. This MR-J2-40C servo amplifier is at your disposal to replace your defective equipment and has a warranty adapted to your needs. Servo amplifier 100% tested...

€720.00

MR-J2-70C - Servo Amplifier - MITSUBISHI

MR-J2-70C

This MITSUBISHI servo amplifier, reference MR-J2-70C is an AC servo drive. It belongs to the MELSERVO-J2-Series. 0,7 kW Mitsubishi AC servo drive for HC-MF73, HC-UF72, HC-UF73 servo motors. This MR-J2-70C servo amplifier is at your disposal to replace your defective equipment and has a warranty adapted to your needs. Servo amplifier 100% tested on...

€690.00

MR-J2-100C - Servo Amplifier - MITSUBISHI

MR-J2-100C

This MITSUBISHI servo amplifier, reference MR-J2-100C is an AC servo drive. It belongs to the MELSERVO-J2-Series. 1 kW Mitsubishi AC servo drive for HC-SF81,HC-SF102,HC-SF103 servo motors. This MR-J2-100C servo amplifier is at your disposal to replace your defective equipment and has a warranty adapted to your needs. Servo amplifier 100% tested on...

€840.00

MR-J2-200C - Servo Amplifier - MITSUBISHI

MR-J2-200C

This MITSUBISHI servo amplifier, reference MR-J2-200C is an AC servo drive. It belongs to the MELSERVO-J2-Series. 2 kW Mitsubishi AC servo drive for HC-SF121/201,HC-SF152/202,HC-SF153 servo motors. This MR-J2-200C servo amplifier is at your disposal to replace your defective equipment and has a warranty adapted to your needs. Servo amplifier 100% tested...

€1,060.00

MR-J2-350C - Servo Amplifier - MITSUBISHI

MR-J2-350C

This MITSUBISHI servo amplifier, reference MR-J2-350C is an AC servo drive. It belongs to the MELSERVO-J2-Series. 3.5 kW Mitsubishi AC servo drive for HC-SF301/352/353, HC-RF103/153 servo motors. This MR-J2-350C servo amplifier is at your disposal to replace your defective equipment and has a warranty adapted to your needs. Servo amplifier 100% tested on...

€1,140.00

MR-J2-10A - Servo Amplifier - MITSUBISHI

MR-J2-10A

This MITSUBISHI servo amplifier, reference MR-J2-10A is an AC servo drive. It belongs to the MELSERVO-J2-Series. 0,1 kW Mitsubishi AC servo drive for HC-MF053-13, HAFF053-13, HC-UF13 servo motors. This MR-J2-10A servo amplifier is at your disposal to replace your defective equipment and has a warranty adapted to your needs. Servo amplifier 100% tested on...

€480.00

MR-J2-20A - Servo Amplifier - MITSUBISHI

MR-J2-20A

This MITSUBISHI servo amplifier, reference MR-J2-20A is an AC servo drive. It belongs to the MELSERVO-J2-Series. 0,2 kW Mitsubishi AC servo drive for HC-MF23, HA-FF23, HC-UF23 servo motors. This MR-J2-20A servo amplifier is at your disposal to replace your defective equipment and has a warranty adapted to your needs. Servo amplifier 100% tested on...

€480.00

MR-J2-40A - Servo Amplifier - MITSUBISHI

MR-J2-40A

This MITSUBISHI servo amplifier, reference MR-J2-40A is an AC servo drive. It belongs to the MELSERVO-J2-Series. 0,4 kW Mitsubishi AC servo drive for HC-MF43, HA-FF33-43, HC-UF43 servo motors. This MR-J2-40A servo amplifier is at your disposal to replace your defective equipment and has a warranty adapted to your needs. Servo amplifier 100% tested on...

€480.00

MR-J2-60A - Servo Amplifier - MITSUBISHI

MR-J2-60A

This MITSUBISHI servo amplifier, reference MR-J2-60A is an AC servo drive. It belongs to the MELSERVO-J2-Series. 0,6 kW Mitsubishi AC servo drive for HC-SF52, HA-FF63, HC-SF53 servo motors. This MR-J2-60A servo amplifier is at your disposal to replace your defective equipment and has a warranty adapted to your needs. Servo amplifier 100% tested on...

€380.00

MR-J2-70A - Servo Amplifier - MITSUBISHI

MR-J2-70A

This MITSUBISHI servo amplifier, reference MR-J2-70A is an AC servo drive. It belongs to the MELSERVO-J2-Series. 0,7 kW Mitsubishi AC servo drive for HC-MF73, HC-UF72.73 servo motors. This MR-J2-70A servo amplifier is at your disposal to replace your defective equipment and has a warranty adapted to your needs. Servo amplifier 100% tested on MITSUBISHI...

€620.00

MR-J2-100A - Servo Amplifier - MITSUBISHI

MR-J2-100A

This MITSUBISHI servo amplifier, reference MR-J2-100A is an AC servo drive. It belongs to the MELSERVO-J2-Series. 1 kW Mitsubishi AC servo drive for HC-SF81, HC-SF102.103 servo motors. This MR-J2-100A servo amplifier is at your disposal to replace your defective equipment and has a warranty adapted to your needs. Servo amplifier 100% tested on MITSUBISHI...

€810.00

MR-J2-200A - Servo Amplifier - MITSUBISHI

MR-J2-200A

This MITSUBISHI servo amplifier, reference MR-J2-200A is an AC servo drive. It belongs to the MELSERVO-J2-Series. 2 kW Mitsubishi AC servo drive for HC-SF121.201.152.153.202.203, HC-RF103.153.152 servo motors. This MR-J2-200A servo amplifier is at your disposal to replace your defective equipment and has a warranty adapted to your needs. Servo amplifier...

€880.00

MR-J2-350A - Servo Amplifier - MITSUBISHI

MR-J2-350A

This MITSUBISHI servo amplifier, reference MR-J2-350A is an AC servo drive. It belongs to the MELSERVO-J2-Series. 3.5 kW Mitsubishi AC servo drive for HC-SF301.352.353, HC-RF203, HC-UF202 servo motors. This MR-J2-350A servo amplifier is at your disposal to replace your defective equipment and has a warranty adapted to your needs. Servo amplifier 100%...

€1,160.00

MR-J2-10A1 - Servo Amplifier - MITSUBISHI

MR-J2-10A1

This MITSUBISHI servo amplifier, reference MR-J2-10A1 is an AC servo drive. It belongs to the MELSERVO-J2-Series. 0,1 kW Mitsubishi AC servo drive for HC-MF053-13, HAFF053-13, HC-UF13 servo motors. This MR-J2-10A1 servo amplifier is at your disposal to replace your defective equipment and has a warranty adapted to your needs. Servo amplifier 100% tested...

€480.00

MR-J2-20A1 - Servo Amplifier - MITSUBISHI

MR-J2-20A1

This MITSUBISHI servo amplifier, reference MR-J2-20A1 is an AC servo drive. It belongs to the MELSERVO-J2-Series. 0,2 kW Mitsubishi AC servo drive for HC-MF23, HA-FF23, HC-UF23 servo motors. This MR-J2-20A1 servo amplifier is at your disposal to replace your defective equipment and has a warranty adapted to your needs. Servo amplifier 100% tested on...

€480.00

MR-J2-40A1 - Servo Amplifier - MITSUBISHI

MR-J2-40A1

This MITSUBISHI servo amplifier, reference MR-J2-40A1 is an AC servo drive. It belongs to the MELSERVO-J2-Series. 0,4 kW Mitsubishi AC servo drive for HC-MF43, HA-FF33-43, HC-UF43 servo motors. This MR-J2-40A1 servo amplifier is at your disposal to replace your defective equipment and has a warranty adapted to your needs. Servo amplifier 100% tested on...

€480.00

MR-J2-10B - Servo Amplifier - MITSUBISHI

MR-J2-10B

This MITSUBISHI servo amplifier, reference MR-J2-10B is an AC servo drive. It belongs to the MELSERVO-J2-Series. 0,1 kW Mitsubishi AC servo drive for HC-MF053-13, HAFF053-13, HC-UF13 servo motors. This MR-J2-10B servo amplifier is at your disposal to replace your defective equipment and has a warranty adapted to your needs. Servo amplifier 100% tested on...

€360.00

MR-J2-20B - Servo Amplifier - MITSUBISHI

MR-J2-20B

This MITSUBISHI servo amplifier, reference MR-J2-20B is an AC servo drive. It belongs to the MELSERVO-J2-Series. 0,2 kW Mitsubishi AC servo drive for HC-MF23, HA-FF23, HC-UF23 servo motors. This MR-J2-20B servo amplifier is at your disposal to replace your defective equipment and has a warranty adapted to your needs. Servo amplifier 100% tested on...

€460.00