Catalog

Showing 1-36 of 189 item(s)

JZNC-XPP02B - Teach Pendant - YASKAWA

JZNC-XPP02B

This Teach Pendant YASKAWA and reference JZNC-XPP02B is used for the robots XRC MOTOMAN / Yasnac Easy multi-language interface and high performance thanks to its RISC processor. This Teach Pendant YASKAWA is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€2,100.00

JUSP-WS30AB - Amplifier - YASKAWA

JUSP-WS30AB

This JUSP-WS30AB and YASKAWA drive is a controller for XRC robot control unit. 2,2 kW Amplifier for Servopack CACR-SK45AAB and CACR-SK16MAAB. This JUSP-WS30AB YASKAWA drive is at your disposal to replace your defective equipment and has a warranty adapted to your needs.

€950.00

JANCD-XEW01-1 - Control board - YASKAWA

JANCD-XEW01-1

This control board JANCD-XEW01-1 and brand YASKAWA is a control board for XRC robot control unit. XEW01-01: Analog output x 3 ports + Status signal Input of a welder This JANCD-XEW01-1 YASKAWA card is at your disposal to replace your defective hardware and has a warranty adapted to your needs.

€370.00

JANCD-MFB01-1 - Control board - YASKAWA

JANCD-MFB01-1

This interface board JANCD-MFB01-1 and YASKAWA is an interface board for XRC robot control unit. Fieldbus system via standard AnyBus modules This JANCD-MFB01-1 YASKAWA interface board is available to replace your defective equipment and has a guarantee adapted to your needs.

€640.00

JARCR-XEB01-1 - Backboard Card - YASKAWA

JARCR-XEB01-1

This expansion card JANCD-XEB01-1 and brand YASKAWA is an expansion card for XRC robot control unit. Backboard card for JANCD-MFB01 This JANCD-XEB01-1 YASKAWA card is at your disposal to replace your defective hardware and has a warranty adapted to your needs.

€380.00

JZRCR-XSU02 - Servo Controller - YASKAWA

JZRCR-XSU02

This drive JZRCR-XSU02 and YASKAWA is a drive for XRC robot control unit. For type: SV3X, UP6, S16X, UP20, UP50, UP20M, SK45X, SK16MX, SP70X .. This YASKAWA JZRCR-XSU02 drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€640.00

On sale!

JZRCR-XC001 - Servo Controller - YASKAWA

JZRCR-XC001

This JZRCR-XC001 and YASKAWA drive is a servo controller for XRC robot control unit. For type: SK45X, UP50, SK16MX, UP6, SK16X, UP20, UP130, UP165, UP200 This JZRCR-XC001 YASKAWA Servo controller is at your disposal to replace your defective equipment and has a warranty adapted to your needs.

€960.00

CIMR-VC4A0002BAA - Drive Speed Controller- YASKAWA

CIMR-VC4A0002BAA

Inverter YASKAWA reference CIMR-VC4A0002BAA. Range V1000. Specifications : 0.4kW/0.75kW 400V 3ph - AC Inverter Drive Speed Controller, Unfiltered. This CIMR-VC4A0002BAA is at your disposal to replace your defective material and has a warranty adapted to your needs. AC inverter tested on engine test bench.

€380.00

CACR-UP6AAC - Servopack - YASKAWA

CACR-UP6AAC

This YASKAWA reference servopack CACR-UP6AAC is a servopack for YASNAC ERCR-UP6-RB04, RB05, RB10. Inverter consisting of JUSP-ACP05JAA (converter), JUSP-WS05AAY17, JUSP-WS10AAY17, JUSP-WS05AAY17, JUSP-WS01AA (in R, B and T), JASP-WRCA01 power supply board JUSP-RCP01XXX. This servopack CACR-UP6AAC is at your disposal to replace your defective equipment.

€2,520.00

JUSP-ACP05JAB - Converter - YASKAWA

JUSP-ACP05JAB

This YASKAWA converter is composed of 2 modules: JUSP-ACP05JAB. It is used in CACR-SV3AAA servopacks, CACR-UP6AAC, CACR-SK16AAC, CACR-UP20AAA. Capacity of 5A. This YASKAWA converter is at your disposal to replace your defective equipment. It is sold with a guarantee of operation adapted to your needs.

€1,180.00

JUSP-WSCA01AA + JUSP-WSCB01AA - Amplifier - YASKAWA

JUSP-WSCA01AA + JUSP-WSCB01AA

This amplifier JUSP-WSCA01AA + JUSP-WSCB01AA and YASKAWA is a amplifier for XRC robot control unit. 100W Amplifier for Servopack CACR-UP6AAC, CACR-SV3AAA This amplifier JUSP-WSCA01AA + JUSP-WSCB01AA is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€320.00

JUSP-WSCB05AA + JUSP-WSCA05AA + JUSP-WSCD05AA - Amplifier - YASKAWA

JUSP-WSCB05AA+WSCA05AA+WSCD05AA

This amplifier JUSP-WSCB05AA + JUSP-WSCA05AA + JUSP-WSCD05AA and YASKAWA brand is a drive for XRC robot control unit. 500W Amplifier for Servopack CACR-UP6AAC, CACR-SV3AAA This amplifier JUSP-WSCB05AA + JUSP-WSCA05AA + JUSP-WSCD05AA is at your disposal to replace your defective hardware.

€310.00

JUSP-WSCD10AA+JUSP-WSCA10AA+JUSP-WSCB10AA - Amplifier - YASKAWA

JUSP-WSCD10AA+WSCA10AA+WSCB10AA

This amplifier JUSP-WSCD10AA+JUSP-WSCA10AA+JUSP-WSCB10AA and YASKAWA brand is a drive for XRC robot control unit. 1kW Amplifier for Servopack CACR-UP6AAC, CACR-SV3AAA This amplifier JUSP-WSCD10AA+JUSP-WSCA10AA+JUSP-WSCB10AA is at your disposal to replace your defective hardware.

€640.00

JUSP-WSCB05AA + JUSP-WSCB05AA + JUSP-WSCD10AA - Amplifier - YASKAWA

JUSP-WSCB05AA+WSCB05AA+WSCD10AA

This amplifier JUSP-WSCB05AA + JUSP-WSCB05AA + JUSP-WSCD10AA and YASKAWA brand is a drive for XRC robot control unit. 500W Amplifier for Servopack CACR-UP6AAC, CACR-SV3AAA This amplifier JUSP-WSCB05AA + JUSP-WSCB05AA + JUSP-WSCD10AA is at your disposal to replace your defective hardware.

€410.00

JUSP-ACPA05JAA + JUSP-ACPCB05JAA - Converter - YASKAWA

JUSP-ACPA05JAA + JUSP-ACPCB05JAA

This YASKAWA converter is composed of 2 modules: JUSP-ACPA05JAA + JUSP-ACPCB05JAA. It is used in CACR-SV3AAA servopacks, CACR-UP6AAC, CACR-SK16AAC, CACR-UP20AAA. Capacity of 5A. This YASKAWA converter is at your disposal to replace your defective equipment. It is sold with a guarantee of operation adapted to your needs.

€920.00

JUSP-RCP01AAC - Power Supply Module - YASKAWA

JUSP-RCP01AAC

This YASKAWA power supply module is reference JUSP-RCP01AAC. It is used several YASKAWA servopacks. This power supply module generates a DC power supply (+ 5V, + 7V, ± 15V) for servo control. The AC input (single phase: 200/220 VAC) is provided by the power supply. This YASKAWA module is at your disposal to replace your defective equipment.

€420.00

JANCD-XCP01-1 - CPU Control Board - YASKAWA

JANCD-XCP01-1

YASKAWA CPU and reference card JANCD-XCP01-1 is used with the XRC MOTOMAN controller. Includes JANCD-XIF03-1 and JANCD-XMM01-2 cards This CPU JANCD-XCP01-1 is at your disposal to replace your defective equipment and has a guarantee of operation adapted to your needs.

€1,050.00

CPS-150F - Power Supply - YASKAWA

CPS-150F

This YASKAWA/YASNAC CN05 and CPS-150F Power Supply is used for the NX100 and XRC MOTOMAN series. Input voltage - 200-230 V AC, frequency - 50/60 Hz, current - 2.1 A This CPS-150F power supply is at your disposal to replace your defective equipment and has a guarantee of operation adapted to your needs.

€940.00

JZNC-XRK01B-1 - CPU Rack - YASKAWA

JZNC-XRK01B-1

This JZNC-XRK01B-1 reference and YASKAWA brand rack is for YASNAC XRC. The CPU Rack (JZNC-XRK01X-X) does not include any cards. BLANK RACK. This rack JZNC-XRK01B-1 is at your disposal to replace your defective equipment and has a guarantee of operation adapted to your needs.

€290.00

On sale!

S30A-4011CA - Laser Scanner - SICK

S30A-4011CA

This S3000 series laser scanner has four protection fields and four servo fields that are freely programmable using your SICK software. You can therefore configure your laser scanner according to the conditions of your installation. This SICK S30A-4011CA scanner is at your disposal to replace your defective equipment.

€2,585.00

S30A-4011BA - Laser Scanner - SICK

S30A-4011BA

This S3000 Series safety laser scanner features 1 protective field set and four servo fields that are freely programmable using your SICK software. You can therefore configure your laser scanner according to the conditions of your installation. Protective Field range : 4 meters This SICK S30A-4011BA scanner is at your disposal to replace your defective...

€2,220.00

S30A-7011CA - Laser Scanner - SICK

S30A-7011CA

This S3000 series safety laser scanner features 4 protective field sets and 12 control fields that are freely programmable using your SICK software. You can therefore configure your laser scanner according to the conditions of your installation. Protective Field range : 7 m. This SICK S30A-7011CA scanner is at your disposal to replace your defective...

€715.00

AX5112-0000 - Digital Compact Servo Drive - BECKHOFF

AX5112-0000

This reference AX5112-0000 and brand BECKHOFF is a servo drive of the AX5000 series. Servo Drive: 1x12A, 3 phases 100-480VAC, 50 / 60Hz. This BECKHOFF servo drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,280.00

JZNC-NIF02-1 - I/O Interface board - YASKAWA

JZNC-NIF02-1

This JZNC-NIF02-1 and YASKAWA interface I/O board is an NX100 robot control unit interface board. Robot I/F unit, associated with a CPS-420F power supply and CPU JZNC-NRK01. This JZNC-NIF02-1 YASKAWA interface board is available to replace your defective equipment and has a guarantee adapted to your needs.

€1,875.00

AX2006 - Digital servo amplifier - BECKHOFF

AX2006

This reference servo amplifier AX2006 and brand BECKHOFF is a servo amplifier of the AX2000 series. Servo amplifier AX2006 : 6A, 3 phases 230-480VAC, 4kVA, 50/60Hz. This BECKHOFF servo amplifier is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,020.00

AX2001 - Digital servo amplifier - BECKHOFF

AX2001

This reference servo amplifier AX2001 and brand BECKHOFF is a servo amplifier of the AX2000 series. Servo amplifier AX2001 : 1,5A, 3 phases 230-480VAC, 1kVA, 50/60Hz. This BECKHOFF servo amplifier is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€780.00

AX5101-0000 - Digital Compact Servo Drive - BECKHOFF

AX5101-0000

This reference AX5101-0000 and brand BECKHOFF is a servo drive of the AX5000 series. Servo Drive: 1x1,5A, 3 phases 100-480VAC, 50 / 60Hz. This BECKHOFF servo drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€460.00

AX2003 - Digital servo amplifier - BECKHOFF

AX2003

This reference servo amplifier AX2003 and brand BECKHOFF is a servo amplifier of the AX2000 series. Servo amplifier AX2003 : 3A, 3 phases 230-480VAC, 2kVA, 50/60Hz. This BECKHOFF servo amplifier is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€450.00

AX2010 - Digital servo amplifier - BECKHOFF

AX2010

This reference servo amplifier AX2010 and brand BECKHOFF is a servo amplifier of the AX2000 series. Servo amplifier AX2010 : 10A, 3 phases 230-480VAC, 7kVA, 50/60Hz. This BECKHOFF servo amplifier is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,190.00

AX5103-0000 - Digital Compact Servo Drive - BECKHOFF

AX5103-0000

This reference AX5103-0000 and brand BECKHOFF is a servo drive of the AX5000 series. Servo Drive: 1x3A, 3 phases 100-480VAC, 50/60Hz. This BECKHOFF servo drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€860.00

AX5106-0000 - Digital Compact Servo Drive - BECKHOFF

AX5106-0000

This reference AX5106-0000 and brand BECKHOFF is a servo drive of the AX5000 series. Servo Drive: 1x6A, 3 phases 100-480VAC, 50/60Hz. This BECKHOFF servo drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€640.00

AX5201-0000 - Digital Compact Servo Drive - BECKHOFF

AX5201-0000

This reference AX5201-0000 and brand BECKHOFF is a servo drive of the AX5000 series. Servo Drive: 2x1,5A, 3 phases 100-480VAC, 50/60Hz. This BECKHOFF servo drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€710.00

JANCD-YEW01-E - Interface board - YASKAWA

JANCD-YEW01-E

This JANCD-YEW01-E and YASKAWA interface board is an interface board for DX200 robot control unit. This board can connect an analog arc control welding power source to the DX200. This JANCD-YEW01-E YASKAWA interface board is available to replace your defective equipment and has a guarantee adapted to your needs.

€790.00

CPS-420F - Control power supply - YASKAWA

CPS-420F

This YASKAWA control ower Supply and CPS-420F reference is used for the MOTOMAN NX100 controller. NX100 compatible with EPX2800, EPX1250 and EPX2050. This CPS-420F power supply is at your disposal to replace your defective equipment and has a guarantee of operation adapted to your needs.

€1,110.00

S30A-6011EA - Laser Scanner - SICK

S30A-6011EA

This safety laser scanner can only be used in combination with the EFI system group, eg. with a Flexi Soft safety control system or another S300 or S3000 safety laser scanner. Range: 5.5 m This SICK S30A-6011EA scanner is at your disposal to replace your defective equipment.

€2,560.00

S30A-7011EA - Laser Scanner - SICK

S30A-7011EA

This S3000 Series safety laser scanner features 1 protective field set and 64 servo fields that are freely programmable using your SICK software. You can therefore configure your laser scanner according to the conditions of your installation. Protective Field range : 7 meters This SICK S30A-7011EA scanner is at your disposal to replace your defective...

€890.00