Catalog

Showing 1-36 of 173 item(s)

JZNC-XPP02B - Teach Pendant - YASKAWA

JZNC-XPP02B

This Teach Pendant YASKAWA and reference JZNC-XPP02B is used for the robots XRC MOTOMAN / Yasnac Easy multi-language interface and high performance thanks to its RISC processor. This Teach Pendant YASKAWA is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€2,100.00

JUSP-WS30AB - Amplifier - YASKAWA

JUSP-WS30AB

This JUSP-WS30AB and YASKAWA drive is a controller for XRC robot control unit. 2,2 kW Amplifier for Servopack CACR-SK45AAB and CACR-SK16MAAB. This JUSP-WS30AB YASKAWA drive is at your disposal to replace your defective equipment and has a warranty adapted to your needs.

€950.00

JANCD-XEW01-1 - Control board - YASKAWA

JANCD-XEW01-1

This control board JANCD-XEW01-1 and brand YASKAWA is a control board for XRC robot control unit. XEW01-01: Analog output x 3 ports + Status signal Input of a welder This JANCD-XEW01-1 YASKAWA card is at your disposal to replace your defective hardware and has a warranty adapted to your needs.

€370.00

JANCD-MFB01-1 - Control board - YASKAWA

JANCD-MFB01-1

This interface board JANCD-MFB01-1 and YASKAWA is an interface board for XRC robot control unit. Fieldbus system via standard AnyBus modules This JANCD-MFB01-1 YASKAWA interface board is available to replace your defective equipment and has a guarantee adapted to your needs.

€640.00

JARCR-XEB01-1 - Backboard Card - YASKAWA

JARCR-XEB01-1

This expansion card JANCD-XEB01-1 and brand YASKAWA is an expansion card for XRC robot control unit. Backboard card for JANCD-MFB01 This JANCD-XEB01-1 YASKAWA card is at your disposal to replace your defective hardware and has a warranty adapted to your needs.

€380.00

JZRCR-XSU02 - Servo Controller - YASKAWA

JZRCR-XSU02

This drive JZRCR-XSU02 and YASKAWA is a drive for XRC robot control unit. For type: SV3X, UP6, S16X, UP20, UP50, UP20M, SK45X, SK16MX, SP70X .. This YASKAWA JZRCR-XSU02 drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€640.00

On sale!

JZRCR-XC001 - Servo Controller - YASKAWA

JZRCR-XC001

This JZRCR-XC001 and YASKAWA drive is a servo controller for XRC robot control unit. For type: SK45X, UP50, SK16MX, UP6, SK16X, UP20, UP130, UP165, UP200 This JZRCR-XC001 YASKAWA Servo controller is at your disposal to replace your defective equipment and has a warranty adapted to your needs.

€960.00

CIMR-VC4A0002BAA - Drive Speed Controller- YASKAWA

CIMR-VC4A0002BAA

Inverter YASKAWA reference CIMR-VC4A0002BAA. Range V1000. Specifications : 0.4kW/0.75kW 400V 3ph - AC Inverter Drive Speed Controller, Unfiltered. This CIMR-VC4A0002BAA is at your disposal to replace your defective material and has a warranty adapted to your needs. AC inverter tested on engine test bench.

€380.00

CACR-UP6AAC - Servopack - YASKAWA

CACR-UP6AAC

This YASKAWA reference servopack CACR-UP6AAC is a servopack for YASNAC ERCR-UP6-RB04, RB05, RB10. Inverter consisting of JUSP-ACP05JAA (converter), JUSP-WS05AAY17, JUSP-WS10AAY17, JUSP-WS05AAY17, JUSP-WS01AA (in R, B and T), JASP-WRCA01 power supply board JUSP-RCP01XXX. This servopack CACR-UP6AAC is at your disposal to replace your defective equipment.

€2,520.00

JUSP-ACP05JAB - Converter - YASKAWA

JUSP-ACP05JAB

This YASKAWA converter is composed of 2 modules: JUSP-ACP05JAB. It is used in CACR-SV3AAA servopacks, CACR-UP6AAC, CACR-SK16AAC, CACR-UP20AAA. Capacity of 5A. This YASKAWA converter is at your disposal to replace your defective equipment. It is sold with a guarantee of operation adapted to your needs.

€1,180.00

JUSP-WSCA01AA + JUSP-WSCB01AA - Amplifier - YASKAWA

JUSP-WSCA01AA + JUSP-WSCB01AA

This amplifier JUSP-WSCA01AA + JUSP-WSCB01AA and YASKAWA is a amplifier for XRC robot control unit. 100W Amplifier for Servopack CACR-UP6AAC, CACR-SV3AAA This amplifier JUSP-WSCA01AA + JUSP-WSCB01AA is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€320.00

JUSP-WSCB05AA + JUSP-WSCA05AA + JUSP-WSCD05AA - Amplifier - YASKAWA

JUSP-WSCB05AA+WSCA05AA+WSCD05AA

This amplifier JUSP-WSCB05AA + JUSP-WSCA05AA + JUSP-WSCD05AA and YASKAWA brand is a drive for XRC robot control unit. 500W Amplifier for Servopack CACR-UP6AAC, CACR-SV3AAA This amplifier JUSP-WSCB05AA + JUSP-WSCA05AA + JUSP-WSCD05AA is at your disposal to replace your defective hardware.

€310.00

JUSP-WSCD10AA+JUSP-WSCA10AA+JUSP-WSCB10AA - Amplifier - YASKAWA

JUSP-WSCD10AA+WSCA10AA+WSCB10AA

This amplifier JUSP-WSCD10AA+JUSP-WSCA10AA+JUSP-WSCB10AA and YASKAWA brand is a drive for XRC robot control unit. 1kW Amplifier for Servopack CACR-UP6AAC, CACR-SV3AAA This amplifier JUSP-WSCD10AA+JUSP-WSCA10AA+JUSP-WSCB10AA is at your disposal to replace your defective hardware.

€640.00

JUSP-WSCB05AA + JUSP-WSCB05AA + JUSP-WSCD10AA - Amplifier - YASKAWA

JUSP-WSCB05AA+WSCB05AA+WSCD10AA

This amplifier JUSP-WSCB05AA + JUSP-WSCB05AA + JUSP-WSCD10AA and YASKAWA brand is a drive for XRC robot control unit. 500W Amplifier for Servopack CACR-UP6AAC, CACR-SV3AAA This amplifier JUSP-WSCB05AA + JUSP-WSCB05AA + JUSP-WSCD10AA is at your disposal to replace your defective hardware.

€410.00

JUSP-ACPA05JAA + JUSP-ACPCB05JAA - Converter - YASKAWA

JUSP-ACPA05JAA + JUSP-ACPCB05JAA

This YASKAWA converter is composed of 2 modules: JUSP-ACPA05JAA + JUSP-ACPCB05JAA. It is used in CACR-SV3AAA servopacks, CACR-UP6AAC, CACR-SK16AAC, CACR-UP20AAA. Capacity of 5A. This YASKAWA converter is at your disposal to replace your defective equipment. It is sold with a guarantee of operation adapted to your needs.

€920.00

JUSP-RCP01AAC - Power Supply Module - YASKAWA

JUSP-RCP01AAC

This YASKAWA power supply module is reference JUSP-RCP01AAC. It is used several YASKAWA servopacks. This power supply module generates a DC power supply (+ 5V, + 7V, ± 15V) for servo control. The AC input (single phase: 200/220 VAC) is provided by the power supply. This YASKAWA module is at your disposal to replace your defective equipment.

€420.00

JANCD-XCP01-1 - CPU Control Board - YASKAWA

JANCD-XCP01-1

YASKAWA CPU and reference card JANCD-XCP01-1 is used with the XRC MOTOMAN controller. Includes JANCD-XIF03-1 and JANCD-XMM01-2 cards This CPU JANCD-XCP01-1 is at your disposal to replace your defective equipment and has a guarantee of operation adapted to your needs.

€1,050.00

CPS-150F - Power Supply - YASKAWA

CPS-150F

This YASKAWA/YASNAC CN05 and CPS-150F Power Supply is used for the NX100 and XRC MOTOMAN series. Input voltage - 200-230 V AC, frequency - 50/60 Hz, current - 2.1 A This CPS-150F power supply is at your disposal to replace your defective equipment and has a guarantee of operation adapted to your needs.

€940.00

JZNC-XRK01B-1 - CPU Rack - YASKAWA

JZNC-XRK01B-1

This JZNC-XRK01B-1 reference and YASKAWA brand rack is for YASNAC XRC. The CPU Rack (JZNC-XRK01X-X) does not include any cards. BLANK RACK. This rack JZNC-XRK01B-1 is at your disposal to replace your defective equipment and has a guarantee of operation adapted to your needs.

€290.00

On sale!

S30A-4011CA - Laser Scanner - SICK

S30A-4011CA

This S3000 series laser scanner has four protection fields and four servo fields that are freely programmable using your SICK software. You can therefore configure your laser scanner according to the conditions of your installation. This SICK S30A-4011CA scanner is at your disposal to replace your defective equipment.

€2,585.00

DBSC102-GAAW - Servo Controller - BALDOR

DBSC102-GAAW

This reference drive DBSC102-GAAW and brand BALDOR is a servo controller for Brushless AC motor. Input: AC230V 50/60Hz, 1PH, Output: 2A/ACO-230V, RS232 interface, binary encoder simulation, 0.87kVA. This BALDOR servo controller is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€460.00

DBSC1110-GAAW - Servo Controller - BALDOR

DBSC1110-GAAW

This reference drive DBSC1110-GAAW and brand BALDOR is a servo controller for Brushless AC motor. Input: AC230V 50/60Hz, 3PH, Output: 10A/ACO-250V, RS232 interface, binary encoder simulation. This BALDOR servo controller is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€580.00

MDH2A02TB-RB23 - Motion Controller - BALDOR

MDH2A02TB-RB23

This reference motion controller MDH2A02TB-RB23 and brand BALDOR is a controller for Brushless AC motor. MintDrive II range. Desc: 2.5A/24V/DB/Res/2CAN Input: AC230V 50/60Hz, Single Phase Output: 2.5A/ACO-230V This BALDOR motion controller is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€850.00

FPH4A02TB-RN23 - Servo drive - BALDOR

FPH4A02TB-RN23

This reference servo drive FPH4A02TB-RN23 and brand BALDOR is a servo drive for Brushless AC motor. Flex + Drive II range. Desc: F + DII-415V / 2.5A / 24V / DB / Res Input: AC400-480V 50/60Hz, Three Phase Output: 2.5A / ACO-460V This BALDOR servo drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€710.00

BSM63N-175AA - Servo Motor brushless - BALDOR

BSM63N-175AA

This reference motor BSM63N-175AA and brand BALDOR is a Brushless AC motor. N series range. TORQ CONT STALL: 0.77 NM, CUR CONT STALL / A RMS: 1,01, POWER: 0,24kW, RATED SPEED / RPM: 4000, RATED BUS VOLTS: : 10000 This BALDOR engine is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€520.00

BSM50N-275AA - Servo Motor brushless - BALDOR

BSM50N-275AA

This reference motor BSM50N-275AA and brand BALDOR is a Brushless AC motor. N series range TORQ CONT STALL: 0.91 NM, CUR CONT STALL / A RMS: 1.42, POWER: 0.18kW, RATED SPEED / RPM: 2000, RATED BUS VOLTS: MECH SPEED: 10000 This BALDOR motor is at your disposal to replace your equipment and has a guarantee adapted to your needs

€580.00

BSM63N-275BA - Servo Motor brushless - BALDOR

BSM63N-275BA

This reference motor BSM63N-275BA and brand BALDOR is a Brushless AC motor. N series range TORQ CONT STALL: 1,47 NM, CUR CONT STALL / A RMS: 1,94, POWER: 0,53kW, RATED SPEED / RPM: 4000, RATED BUS VOLTS: MECH SPEED: 10000 This BALDOR engine is at your disposal to replace your equipment and has a guarantee adapted to your needs

€620.00

S30A-4011BA - Laser Scanner - SICK

S30A-4011BA

This S3000 Series safety laser scanner features 1 protective field set and four servo fields that are freely programmable using your SICK software. You can therefore configure your laser scanner according to the conditions of your installation. Protective Field range : 4 meters This SICK S30A-4011BA scanner is at your disposal to replace your defective...

€2,220.00

S30A-7011CA - Laser Scanner - SICK

S30A-7011CA

This S3000 series safety laser scanner features 4 protective field sets and 12 control fields that are freely programmable using your SICK software. You can therefore configure your laser scanner according to the conditions of your installation. Protective Field range : 7 m. This SICK S30A-7011CA scanner is at your disposal to replace your defective...

€715.00

SBSC1115 - Servo Controller - BALDOR

SBSC1115

This SBSC1115 brushless reference and brand BALDOR is a drive for Brushless AC motor. SBSC 1000/1100 Series Input: 3AC 230V 50 / 60Hz, 3PH, Output: 15A / ACO-250V, RS232 Interface, Binary Encoder Simulation. This BALDOR drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€720.00

FD2A02TR-RN20 - Servo Drive - BALDOR

FD2A02TR-RN20

This reference servo drive FD2A02TR-RN20 and brand BALDOR is a Brushless motor drive. FLEXDRIVE range. Rated voltage: 230V, output current: 2.5A, 10A input circuit breaker This BALDOR drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€860.00

SBSC1102 - Servo Controller - BALDOR

SBSC1102

This SBSC1102 brushless reference and BALDOR brand is a Brushless AC motor drive. SBSC 1000/1100 Series Input: AC230V 50 / 60Hz, 3PH, Output: 2A / ACO-250V, RS232 Interface, Binary Encoder Simulation. This BALDOR drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,170.00

SBSC1105 - Servo Controller - BALDOR

SBSC1105

This SBSC1105 brushless reference and BALDOR brand is a Brushless AC motor drive. SBSC 1000/1100 Series Input: AC230V 50 / 60Hz, 3PH, Output: 5A / ACO-250V, RS232 Interface, Binary Encoder Simulation. This BALDOR drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€3,345.00

BSC1010 - Servo Controller - BALDOR

BSC1010

This brushless reference drive BSC1010 and BALDOR brand is a drive for Brushless AC motor. BSC 1000/1100 Series Input: DC320V Output: 10A / ACO-250V This BALDOR drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,240.00

BSM90N-175AA - Servo Motor brushless - BALDOR

BSM90N-175AA

This reference motor BSM90N-175AA and brand BALDOR is a Brushless motor AC.Gamme C series TORQ CONT STALL: 6 NM, CUR CONT STALL / AT RMS: 8.07, POWER: 0.53kW, RATED SPEED / RPM: 4000, RATED BUS VOLTS: 300, PEAK CUR / AT RMS: 29.05, MAX MECH SPEED 6000 This BALDOR Engine is at your disposal to replace your equipment and has a guarantee adapted to your needs

€1,060.00

BSC1115-24 - Servo Controller - BALDOR

BSC1115-24

This brushless reference drive BSC1115-24 and BALDOR brand is a drive for Brushless AC motor. BSC 1000/1100 Series Input: AC230V, 50/60Hz, Three phase Output: 15A / ACO-250V This BALDOR drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€3,210.00