Catalog

Showing 1-36 of 535 item(s)

JZNC-XPP02B - Teach Pendant - YASKAWA

JZNC-XPP02B

This Teach Pendant YASKAWA and reference JZNC-XPP02B is used for the robots XRC MOTOMAN / Yasnac Easy multi-language interface and high performance thanks to its RISC processor. This Teach Pendant YASKAWA is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€2,100.00

JUSP-WS30AB - Amplifier - YASKAWA

JUSP-WS30AB

This JUSP-WS30AB and YASKAWA drive is a controller for XRC robot control unit. 2,2 kW Amplifier for Servopack CACR-SK45AAB and CACR-SK16MAAB. This JUSP-WS30AB YASKAWA drive is at your disposal to replace your defective equipment and has a warranty adapted to your needs.

€950.00

JANCD-XEW01-1 - Control board - YASKAWA

JANCD-XEW01-1

This control board JANCD-XEW01-1 and brand YASKAWA is a control board for XRC robot control unit. XEW01-01: Analog output x 3 ports + Status signal Input of a welder This JANCD-XEW01-1 YASKAWA card is at your disposal to replace your defective hardware and has a warranty adapted to your needs.

€370.00

JANCD-MFB01-1 - Control board - YASKAWA

JANCD-MFB01-1

This interface board JANCD-MFB01-1 and YASKAWA is an interface board for XRC robot control unit. Fieldbus system via standard AnyBus modules This JANCD-MFB01-1 YASKAWA interface board is available to replace your defective equipment and has a guarantee adapted to your needs.

€640.00

JARCR-XEB01-1 - Backboard Card - YASKAWA

JARCR-XEB01-1

This expansion card JANCD-XEB01-1 and brand YASKAWA is an expansion card for XRC robot control unit. Backboard card for JANCD-MFB01 This JANCD-XEB01-1 YASKAWA card is at your disposal to replace your defective hardware and has a warranty adapted to your needs.

€380.00

JZRCR-XSU02 - Servo Controller - YASKAWA

JZRCR-XSU02

This drive JZRCR-XSU02 and YASKAWA is a drive for XRC robot control unit. For type: SV3X, UP6, S16X, UP20, UP50, UP20M, SK45X, SK16MX, SP70X .. This YASKAWA JZRCR-XSU02 drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€640.00

On sale!

JZRCR-XC001 - Servo Controller - YASKAWA

JZRCR-XC001

This JZRCR-XC001 and YASKAWA drive is a servo controller for XRC robot control unit. For type: SK45X, UP50, SK16MX, UP6, SK16X, UP20, UP130, UP165, UP200 This JZRCR-XC001 YASKAWA Servo controller is at your disposal to replace your defective equipment and has a warranty adapted to your needs.

€960.00

CIMR-VC4A0002BAA - Drive Speed Controller- YASKAWA

CIMR-VC4A0002BAA

Inverter YASKAWA reference CIMR-VC4A0002BAA. Range V1000. Specifications : 0.4kW/0.75kW 400V 3ph - AC Inverter Drive Speed Controller, Unfiltered. This CIMR-VC4A0002BAA is at your disposal to replace your defective material and has a warranty adapted to your needs. AC inverter tested on engine test bench.

€380.00

TSX3721001 - PLC - SCHNEIDER ELECTRIC

TSX3721001

Schneider PLC / Telemecanique reference TSX3721001. Modicon PLC Micro. TSX micro 3721 100/240 V AC base This Schneider TSX3721001 is at your disposal to replace your defective equipment and has a warranty adapted to your needs. PLC SCHNEIDER reconditioned and tested under full load (duration test) on TSX Micro Modicon bench.

€330.00

ABL8RPS24050 - Power Supply - SCHNEIDER ELECTRIC

ABL8RPS24050

This SCHNEIDER ELECTRIC reference power supply ABL8RPS24050 is part of the PHASEO range. Operates in Phaseo - Compact regulated switching mode. Regulated output of 24 VDC / 5A. Power: 120W This power supply ABL8RPS24050 is at your disposal in standard supply or exchange to replace your defective equipment and has a guarantee.

€80.00

CACR-UP6AAC - Servopack - YASKAWA

CACR-UP6AAC

This YASKAWA reference servopack CACR-UP6AAC is a servopack for YASNAC ERCR-UP6-RB04, RB05, RB10. Inverter consisting of JUSP-ACP05JAA (converter), JUSP-WS05AAY17, JUSP-WS10AAY17, JUSP-WS05AAY17, JUSP-WS01AA (in R, B and T), JASP-WRCA01 power supply board JUSP-RCP01XXX. This servopack CACR-UP6AAC is at your disposal to replace your defective equipment.

€2,520.00

JUSP-ACP05JAB - Converter - YASKAWA

JUSP-ACP05JAB

This YASKAWA converter is composed of 2 modules: JUSP-ACP05JAB. It is used in CACR-SV3AAA servopacks, CACR-UP6AAC, CACR-SK16AAC, CACR-UP20AAA. Capacity of 5A. This YASKAWA converter is at your disposal to replace your defective equipment. It is sold with a guarantee of operation adapted to your needs.

€1,180.00

JUSP-WSCA01AA + JUSP-WSCB01AA - Amplifier - YASKAWA

JUSP-WSCA01AA + JUSP-WSCB01AA

This amplifier JUSP-WSCA01AA + JUSP-WSCB01AA and YASKAWA is a amplifier for XRC robot control unit. 100W Amplifier for Servopack CACR-UP6AAC, CACR-SV3AAA This amplifier JUSP-WSCA01AA + JUSP-WSCB01AA is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€320.00

JUSP-WSCB05AA + JUSP-WSCA05AA + JUSP-WSCD05AA - Amplifier - YASKAWA

JUSP-WSCB05AA+WSCA05AA+WSCD05AA

This amplifier JUSP-WSCB05AA + JUSP-WSCA05AA + JUSP-WSCD05AA and YASKAWA brand is a drive for XRC robot control unit. 500W Amplifier for Servopack CACR-UP6AAC, CACR-SV3AAA This amplifier JUSP-WSCB05AA + JUSP-WSCA05AA + JUSP-WSCD05AA is at your disposal to replace your defective hardware.

€310.00

JUSP-WSCD10AA+JUSP-WSCA10AA+JUSP-WSCB10AA - Amplifier - YASKAWA

JUSP-WSCD10AA+WSCA10AA+WSCB10AA

This amplifier JUSP-WSCD10AA+JUSP-WSCA10AA+JUSP-WSCB10AA and YASKAWA brand is a drive for XRC robot control unit. 1kW Amplifier for Servopack CACR-UP6AAC, CACR-SV3AAA This amplifier JUSP-WSCD10AA+JUSP-WSCA10AA+JUSP-WSCB10AA is at your disposal to replace your defective hardware.

€640.00

JUSP-WSCB05AA + JUSP-WSCB05AA + JUSP-WSCD10AA - Amplifier - YASKAWA

JUSP-WSCB05AA+WSCB05AA+WSCD10AA

This amplifier JUSP-WSCB05AA + JUSP-WSCB05AA + JUSP-WSCD10AA and YASKAWA brand is a drive for XRC robot control unit. 500W Amplifier for Servopack CACR-UP6AAC, CACR-SV3AAA This amplifier JUSP-WSCB05AA + JUSP-WSCB05AA + JUSP-WSCD10AA is at your disposal to replace your defective hardware.

€410.00

JUSP-ACPA05JAA + JUSP-ACPCB05JAA - Converter - YASKAWA

JUSP-ACPA05JAA + JUSP-ACPCB05JAA

This YASKAWA converter is composed of 2 modules: JUSP-ACPA05JAA + JUSP-ACPCB05JAA. It is used in CACR-SV3AAA servopacks, CACR-UP6AAC, CACR-SK16AAC, CACR-UP20AAA. Capacity of 5A. This YASKAWA converter is at your disposal to replace your defective equipment. It is sold with a guarantee of operation adapted to your needs.

€920.00

JUSP-RCP01AAC - Power Supply Module - YASKAWA

JUSP-RCP01AAC

This YASKAWA power supply module is reference JUSP-RCP01AAC. It is used several YASKAWA servopacks. This power supply module generates a DC power supply (+ 5V, + 7V, ± 15V) for servo control. The AC input (single phase: 200/220 VAC) is provided by the power supply. This YASKAWA module is at your disposal to replace your defective equipment.

€420.00

JANCD-XCP01-1 - CPU Control Board - YASKAWA

JANCD-XCP01-1

YASKAWA CPU and reference card JANCD-XCP01-1 is used with the XRC MOTOMAN controller. Includes JANCD-XIF03-1 and JANCD-XMM01-2 cards This CPU JANCD-XCP01-1 is at your disposal to replace your defective equipment and has a guarantee of operation adapted to your needs.

€1,050.00

CPS-150F - Power Supply - YASKAWA

CPS-150F

This YASKAWA/YASNAC CN05 and CPS-150F Power Supply is used for the NX100 and XRC MOTOMAN series. Input voltage - 200-230 V AC, frequency - 50/60 Hz, current - 2.1 A This CPS-150F power supply is at your disposal to replace your defective equipment and has a guarantee of operation adapted to your needs.

€940.00

JZNC-XRK01B-1 - CPU Rack - YASKAWA

JZNC-XRK01B-1

This JZNC-XRK01B-1 reference and YASKAWA brand rack is for YASNAC XRC. The CPU Rack (JZNC-XRK01X-X) does not include any cards. BLANK RACK. This rack JZNC-XRK01B-1 is at your disposal to replace your defective equipment and has a guarantee of operation adapted to your needs.

€290.00

TSX3705001 - PLC - SCHNEIDER ELECTRIC

TSX3705001

Schneider Electric PLC / Telemecanique reference TSX3705001. Modicon PLC Micro. Modicon TSX Micro - Tsx 3705 ca This Schneider TSX3705001 is at your disposal to replace your defective equipment and has a warranty adapted to your needs. PLC SCHNEIDER reconditioned and tested under full load (duration test) on TSX Micro Modicon bench.

€380.00

BMXCPS2000 - Power Supply Module - SCHNEIDER ELECTRIC

BMXCPS2000

This SCHNEIDER reference power supply module BMXCPS2000 is part of the MODICON M340 range. BMXCPS2000 : Modicon X80, 100 / 240V, AC. This BMXCPS2000 power supply is at your disposal in standard supply or exchange to replace your defective equipment and has a guarantee.

€270.00

ABL8RPS24030 - Power Supply - SCHNEIDER ELECTRIC

ABL8RPS24030

This SCHNEIDER ELECTRIC reference power supply ABL8RPS24030 is part of the PHASEO range. Operates in Phaseo - Compact regulated switching mode. Regulated output of 24 VDC / 3A. Power: 72W This power supply ABL8RPS24030 is at your disposal in standard supply or exchange to replace your defective equipment and has a guarantee.

€145.00

MPCKT55NAX20N - PC Touchscreen Magelis display Compact IPC - SCHNEIDER ELECTRIC

MPCKT55NAX20N

This SCHNEIDER ELECTRIC brand MPCKT55NAX20N industrial PC belongs to the MAGELIS COMPACT iPC range. Touchscreen. Intel Pentium M. 15 inches. Display: TFT LCD with active color matrix. 1024 x 768 pixels SVGA. This industrial PC MPCKT55NAX20N is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€3,770.00

VW3A1101 - Keypad - SCHNEIDER ELECTRIC

VW3A1101

This keypad VW3A1101 and brand SCHNEIDER ELECTRIC is a programming console of the range ALTIVAR71. Used for ATV212, ATV71, ATV71Q, ATV320, ATV LIFT, ATV312, ATV32, ATV 312 SOLAR, ATV61Q. This console VW3A1101 Télémécanique is at your disposal to replace your defective material and has a guarantee adapted to your needs.

€110.00

140CPS21400 - Power supply module - SCHNEIDER ELECTRIC

140CPS21400

This SCHNEIDER power supply reference 140CPS21400 is part of the MODICON QUANTUM range. 140CPS21400: 24 Vdc, 8A, Cumulative. This 140CPS21400 power supply is at your disposal in standard supply or exchange to replace your defective equipment and has a guarantee.

€460.00

LXM05AD34N4 - Motion servo drive - SCHNEIDER ELECTRIC

LXM05AD34N4

This servo drive for motion control SCHNEIDER ELECTRIC reference LXM05AD34N4 is an AC servo drive for universal control. LXM05 series Motion servo drive: 3kW, Three-phase, 380..480V, 50/60Hz. CANopen and Modbus. This motion servo drive LXM05AD34N4 is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€2,260.00

JZNC-NIF02-1 - I/O Interface board - YASKAWA

JZNC-NIF02-1

This JZNC-NIF02-1 and YASKAWA interface I/O board is an NX100 robot control unit interface board. Robot I/F unit, associated with a CPS-420F power supply and CPU JZNC-NRK01. This JZNC-NIF02-1 YASKAWA interface board is available to replace your defective equipment and has a guarantee adapted to your needs.

€1,875.00

ATV320U22N4C - Speed drive - SCHNEIDER ELECTRIC

ATV320U22N4C

This ATV320U22N4C and SCHNEIDER ELECTRIC reference speed controller is a variable speed drive for synchronous and asynchronous motors. Series: ALTIVAR MACHINE ATV320 ATV320U22N4C : 2.2kW - 380 / 500V tri, Compact, EMC filter - IP21 This ATV320 (Schneider Electric) is at your disposal to replace your defective equipment and has a guarantee adapted to your...

€640.00

BMXP341000 - Processor module - SCHNEIDER ELECTRIC

BMXP341000

This SCHNEIDER ELECTRIC processor module is reference BMXP341000. It belongs to the MODICON M340 serie. BMXP341000 : 512 Discrete I/O; 128 analog I/O, 20 business channels. 2048 KB built-in This BMXP341000 processor is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€310.00

JANCD-YEW01-E - Interface board - YASKAWA

JANCD-YEW01-E

This JANCD-YEW01-E and YASKAWA interface board is an interface board for DX200 robot control unit. This board can connect an analog arc control welding power source to the DX200. This JANCD-YEW01-E YASKAWA interface board is available to replace your defective equipment and has a guarantee adapted to your needs.

€790.00

CPS-420F - Control power supply - YASKAWA

CPS-420F

This YASKAWA control ower Supply and CPS-420F reference is used for the MOTOMAN NX100 controller. NX100 compatible with EPX2800, EPX1250 and EPX2050. This CPS-420F power supply is at your disposal to replace your defective equipment and has a guarantee of operation adapted to your needs.

€1,110.00

LXM05AD14N4 - Motion servo drive - SCHNEIDER ELECTRIC

LXM05AD14N4

This servo drive for motion control SCHNEIDER ELECTRIC reference LXM05AD14N4 is an AC servo drive for universal control. LXM05 series Motion servo drive: 1.4kW, Three-phase, 380..480V, 50/60Hz. CANopen and Modbus. This motion servo drive LXM05AD14N4 is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€2,200.00

LXM05AD22N4 - Motion servo drive - SCHNEIDER ELECTRIC

LXM05AD22N4

This servo drive for motion control SCHNEIDER ELECTRIC reference LXM05AD22N4 is an AC servo drive for universal control. LXM05 series Motion servo drive: 2.0kW, Three-phase, 380..480V, 50/60Hz. CANopen and Modbus. This motion servo drive LXM05AD22N4 is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€2,230.00

LXM05AD57N4 - Motion servo drive - SCHNEIDER ELECTRIC

LXM05AD57N4

This servo drive for motion control SCHNEIDER ELECTRIC reference LXM05AD57N4 is an AC servo drive for universal control. LXM05 series Motion servo drive: 6kW, Three-phase, 380..480V, 50/60Hz. CANopen and Modbus. This motion servo drive LXM05AD57N4 is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€2,480.00