Catalog

Showing 1-36 of 174 item(s)

JZNC-XPP02B - Teach Pendant - YASKAWA

JZNC-XPP02B

This Teach Pendant YASKAWA and reference JZNC-XPP02B is used for the robots XRC MOTOMAN / Yasnac Easy multi-language interface and high performance thanks to its RISC processor. This Teach Pendant YASKAWA is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€2,100.00

JUSP-WS30AB - Amplifier - YASKAWA

JUSP-WS30AB

This JUSP-WS30AB and YASKAWA drive is a controller for XRC robot control unit. 2,2 kW Amplifier for Servopack CACR-SK45AAB and CACR-SK16MAAB. This JUSP-WS30AB YASKAWA drive is at your disposal to replace your defective equipment and has a warranty adapted to your needs.

€950.00

JANCD-XEW01-1 - Control board - YASKAWA

JANCD-XEW01-1

This control board JANCD-XEW01-1 and brand YASKAWA is a control board for XRC robot control unit. XEW01-01: Analog output x 3 ports + Status signal Input of a welder This JANCD-XEW01-1 YASKAWA card is at your disposal to replace your defective hardware and has a warranty adapted to your needs.

€370.00

JANCD-MFB01-1 - Control board - YASKAWA

JANCD-MFB01-1

This interface board JANCD-MFB01-1 and YASKAWA is an interface board for XRC robot control unit. Fieldbus system via standard AnyBus modules This JANCD-MFB01-1 YASKAWA interface board is available to replace your defective equipment and has a guarantee adapted to your needs.

€640.00

JARCR-XEB01-1 - Backboard Card - YASKAWA

JARCR-XEB01-1

This expansion card JANCD-XEB01-1 and brand YASKAWA is an expansion card for XRC robot control unit. Backboard card for JANCD-MFB01 This JANCD-XEB01-1 YASKAWA card is at your disposal to replace your defective hardware and has a warranty adapted to your needs.

€380.00

JZRCR-XSU02 - Servo Controller - YASKAWA

JZRCR-XSU02

This drive JZRCR-XSU02 and YASKAWA is a drive for XRC robot control unit. For type: SV3X, UP6, S16X, UP20, UP50, UP20M, SK45X, SK16MX, SP70X .. This YASKAWA JZRCR-XSU02 drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€640.00

On sale!

JZRCR-XC001 - Servo Controller - YASKAWA

JZRCR-XC001

This JZRCR-XC001 and YASKAWA drive is a servo controller for XRC robot control unit. For type: SK45X, UP50, SK16MX, UP6, SK16X, UP20, UP130, UP165, UP200 This JZRCR-XC001 YASKAWA Servo controller is at your disposal to replace your defective equipment and has a warranty adapted to your needs.

€960.00

CIMR-VC4A0002BAA - Drive Speed Controller- YASKAWA

CIMR-VC4A0002BAA

Inverter YASKAWA reference CIMR-VC4A0002BAA. Range V1000. Specifications : 0.4kW/0.75kW 400V 3ph - AC Inverter Drive Speed Controller, Unfiltered. This CIMR-VC4A0002BAA is at your disposal to replace your defective material and has a warranty adapted to your needs. AC inverter tested on engine test bench.

€380.00

CACR-UP6AAC - Servopack - YASKAWA

CACR-UP6AAC

This YASKAWA reference servopack CACR-UP6AAC is a servopack for YASNAC ERCR-UP6-RB04, RB05, RB10. Inverter consisting of JUSP-ACP05JAA (converter), JUSP-WS05AAY17, JUSP-WS10AAY17, JUSP-WS05AAY17, JUSP-WS01AA (in R, B and T), JASP-WRCA01 power supply board JUSP-RCP01XXX. This servopack CACR-UP6AAC is at your disposal to replace your defective equipment.

€2,520.00

JUSP-ACP05JAB - Converter - YASKAWA

JUSP-ACP05JAB

This YASKAWA converter is composed of 2 modules: JUSP-ACP05JAB. It is used in CACR-SV3AAA servopacks, CACR-UP6AAC, CACR-SK16AAC, CACR-UP20AAA. Capacity of 5A. This YASKAWA converter is at your disposal to replace your defective equipment. It is sold with a guarantee of operation adapted to your needs.

€1,180.00

JUSP-WSCA01AA + JUSP-WSCB01AA - Amplifier - YASKAWA

JUSP-WSCA01AA + JUSP-WSCB01AA

This amplifier JUSP-WSCA01AA + JUSP-WSCB01AA and YASKAWA is a amplifier for XRC robot control unit. 100W Amplifier for Servopack CACR-UP6AAC, CACR-SV3AAA This amplifier JUSP-WSCA01AA + JUSP-WSCB01AA is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€320.00

JUSP-WSCB05AA + JUSP-WSCA05AA + JUSP-WSCD05AA - Amplifier - YASKAWA

JUSP-WSCB05AA+WSCA05AA+WSCD05AA

This amplifier JUSP-WSCB05AA + JUSP-WSCA05AA + JUSP-WSCD05AA and YASKAWA brand is a drive for XRC robot control unit. 500W Amplifier for Servopack CACR-UP6AAC, CACR-SV3AAA This amplifier JUSP-WSCB05AA + JUSP-WSCA05AA + JUSP-WSCD05AA is at your disposal to replace your defective hardware.

€310.00

JUSP-WSCD10AA+JUSP-WSCA10AA+JUSP-WSCB10AA - Amplifier - YASKAWA

JUSP-WSCD10AA+WSCA10AA+WSCB10AA

This amplifier JUSP-WSCD10AA+JUSP-WSCA10AA+JUSP-WSCB10AA and YASKAWA brand is a drive for XRC robot control unit. 1kW Amplifier for Servopack CACR-UP6AAC, CACR-SV3AAA This amplifier JUSP-WSCD10AA+JUSP-WSCA10AA+JUSP-WSCB10AA is at your disposal to replace your defective hardware.

€640.00

JUSP-WSCB05AA + JUSP-WSCB05AA + JUSP-WSCD10AA - Amplifier - YASKAWA

JUSP-WSCB05AA+WSCB05AA+WSCD10AA

This amplifier JUSP-WSCB05AA + JUSP-WSCB05AA + JUSP-WSCD10AA and YASKAWA brand is a drive for XRC robot control unit. 500W Amplifier for Servopack CACR-UP6AAC, CACR-SV3AAA This amplifier JUSP-WSCB05AA + JUSP-WSCB05AA + JUSP-WSCD10AA is at your disposal to replace your defective hardware.

€410.00

JUSP-ACPA05JAA + JUSP-ACPCB05JAA - Converter - YASKAWA

JUSP-ACPA05JAA + JUSP-ACPCB05JAA

This YASKAWA converter is composed of 2 modules: JUSP-ACPA05JAA + JUSP-ACPCB05JAA. It is used in CACR-SV3AAA servopacks, CACR-UP6AAC, CACR-SK16AAC, CACR-UP20AAA. Capacity of 5A. This YASKAWA converter is at your disposal to replace your defective equipment. It is sold with a guarantee of operation adapted to your needs.

€920.00

JUSP-RCP01AAC - Power Supply Module - YASKAWA

JUSP-RCP01AAC

This YASKAWA power supply module is reference JUSP-RCP01AAC. It is used several YASKAWA servopacks. This power supply module generates a DC power supply (+ 5V, + 7V, ± 15V) for servo control. The AC input (single phase: 200/220 VAC) is provided by the power supply. This YASKAWA module is at your disposal to replace your defective equipment.

€420.00

JANCD-XCP01-1 - CPU Control Board - YASKAWA

JANCD-XCP01-1

YASKAWA CPU and reference card JANCD-XCP01-1 is used with the XRC MOTOMAN controller. Includes JANCD-XIF03-1 and JANCD-XMM01-2 cards This CPU JANCD-XCP01-1 is at your disposal to replace your defective equipment and has a guarantee of operation adapted to your needs.

€1,050.00

CPS-150F - Power Supply - YASKAWA

CPS-150F

This YASKAWA/YASNAC CN05 and CPS-150F Power Supply is used for the NX100 and XRC MOTOMAN series. Input voltage - 200-230 V AC, frequency - 50/60 Hz, current - 2.1 A This CPS-150F power supply is at your disposal to replace your defective equipment and has a guarantee of operation adapted to your needs.

€940.00

JZNC-XRK01B-1 - CPU Rack - YASKAWA

JZNC-XRK01B-1

This JZNC-XRK01B-1 reference and YASKAWA brand rack is for YASNAC XRC. The CPU Rack (JZNC-XRK01X-X) does not include any cards. BLANK RACK. This rack JZNC-XRK01B-1 is at your disposal to replace your defective equipment and has a guarantee of operation adapted to your needs.

€290.00

On sale!

S30A-4011CA - Laser Scanner - SICK

S30A-4011CA

This S3000 series laser scanner has four protection fields and four servo fields that are freely programmable using your SICK software. You can therefore configure your laser scanner according to the conditions of your installation. This SICK S30A-4011CA scanner is at your disposal to replace your defective equipment.

€2,585.00

KCP1 69-000-398 - Teach Pendant - KUKA

KCP1 69-000-398

This KCP1 69-000-398 and KUKA brand Teach Pendant is a control panel for the KUKA KR 60 P, KR 100 P and KR 350 robot cabinets. The KR 100 PA and KR 160 PA robots can optionally be equipped with the KR C1 A control This Teach Pendant KUKA is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€960.00

KCP2 00-130-547 - Teach Pendant - KUKA

KCP2 00-130-547

This KCP2 00-130-547 and KUKA reference Teach Pendant is a control panel for KUKA KR C2 and KR C3 robot cabinets. This Teach Pendant KUKA is at your disposal to replace your defective material and has a guarantee adapted to your needs.

€2,100.00

KSD1-08 00 122 284 - Servo Drive - KUKA

KSD1-08 00 122 284

This reference servo drive KSD1-08 00 122 284 and KUKA brand is a drive for KUKA KR C2 robot control cabinets. Input: 2 / PE DC 0-565 / 675V 4.9A / 3.9A Output: 3 / PE AC 0-400 / 480V 4.0A / 3.2A 0-480 Hz This Servo Drive KSD1-08 00 122 284 KUKA is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,165.00

KSD1-16 00-122-285 - Servo Drive - KUKA

KSD1-16 00-122-285

This KSD1-16 00-122-285 reference servo drive and KUKA brand is a drive for the KUKA KR C2 robot control cabinet. Input: 2/PE DC 0-565/675V 9,8A/7,8A Output: 3/PE AC 0-400V 8.0A/6.4A 0-480 Hz This Servo Drive KSD1-16 00-122-285 KUKA is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€260.00

S30A-4011BA - Laser Scanner - SICK

S30A-4011BA

This S3000 Series safety laser scanner features 1 protective field set and four servo fields that are freely programmable using your SICK software. You can therefore configure your laser scanner according to the conditions of your installation. Protective Field range : 4 meters This SICK S30A-4011BA scanner is at your disposal to replace your defective...

€2,220.00

S30A-7011CA - Laser Scanner - SICK

S30A-7011CA

This S3000 series safety laser scanner features 4 protective field sets and 12 control fields that are freely programmable using your SICK software. You can therefore configure your laser scanner according to the conditions of your installation. Protective Field range : 7 m. This SICK S30A-7011CA scanner is at your disposal to replace your defective...

€715.00

KCP1 69-000-399 - Teach Pendant - KUKA

KCP1 69-000-399

This KCP1 69-000-399 and KUKA brand Teach Pendant is a control panel for the KUKA KR 60 P, KR 100 P and KR 350 robot cabinets. The KR 100 PA and KR 160 PA robots can optionally be equipped with the KR C1 A control This Teach Pendant KUKA is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€960.00

KCP2 00-107-264 - Teach Pendant - KUKA

KCP2 00-107-264

This KCP2 00-107-264 and KUKA reference Teach Pendant is a control panel for KUKA KR C2 and KR C3 robot cabinets. This Teach Pendant KUKA is at your disposal to replace your defective material and has a guarantee adapted to your needs.

€2,390.00

KCP2 00-107-263 - Teach Pendant - KUKA

KCP2 00-107-263

This KCP2 00-107-263 and KUKA reference Teach Pendant is a control panel for KUKA KR C2 and KR C3 robot cabinets. This Teach Pendant KUKA is at your disposal to replace your defective material and has a guarantee adapted to your needs.

€2,980.00

KCP2 00-110-185 - Teach Pendant - KUKA

KCP2 00-110-185

This KCP2 00-110-185 and KUKA reference Teach Pendant is a control panel for KUKA KR C2 and KR C3 robot cabinets. This Teach Pendant KUKA is at your disposal to replace your defective material and has a guarantee adapted to your needs.

€2,820.00

KCP2 00-131-239 - Teach Pendant - KUKA

KCP2 00-131-239

This KCP2 00-131-239 and KUKA reference Teach Pendant is a control panel for KUKA KR C2 and KR C3 robot cabinets. This Teach Pendant KUKA is at your disposal to replace your defective material and has a guarantee adapted to your needs.

€2,880.00

KSD1-08 00-105 925 - Servo Drive - KUKA

KSD1-08 00-105 925

This reference servo drive KSD1-08 00 105 925 and KUKA brand is a drive for KUKA KR C2 robot control cabinets. Input: 2/PE DC 0-585V 4,9A Output: 3/PE AC 0-480V 4,0A 3.3kVA 0-480 Hz This Servo Drive KSD1-08 00 105 925 KUKA is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€780.00

KSD1-16 00-105-350 - Servo Drive - KUKA

KSD1-16 00-105-350

This KSD1-16 00-105-350 reference servo drive and KUKA brand is a drive for the KUKA KR C2 robot control cabinet. Input: 2/PE DC 0-585V 9,8A Output: 3/PE AC 0-480V 8,0A 6,7kVA 0-480 Hz This Servo Drive KSD1-16 00-105-350 KUKA is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€410.00

KSD1-32 00-105-351 - Servo Drive - KUKA

KSD1-32 00-105-351

This reference servo drive KSD1-32 00-105-351 and KUKA brand is a drive for KUKA KR C2 robot control cabinets. Input: 2 / PE DC 0-585V 19.6A Output: 3 / PE AC 0-480V 16A 13.3kVA 0-480 Hz This Servo Drive KSD1-32 00-105-351 KUKA is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€650.00

KSD1-32 00-122-286 - Servo Drive - KUKA

KSD1-32 00-122-286

This reference servo drive KSD1-32 00-122-286 and KUKA brand is a drive for KUKA KR C2 robot control cabinets. Input: 2/PE DC 0-565/675V 19,6A/15,7A Output: 3/PE AC 0-400/480V 16A/12,8A 0-480 Hz This Servo Drive KSD1-32 00-122-286 KUKA is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€820.00

KSD1-48 00-105-413 - Servo Drive - KUKA

KSD1-48 00-105-413

This reference servo drive KSD1-48 00-105-413 and KUKA brand is a drive for KUKA KR C2 robot control cabinets. Input: 2/PE DC 0-585V 20,8A Output: 3/PE AC 0-480V 17A 14,1kVA 0-480 Hz This Servo Drive KSD1-48 00-105-413 KUKA is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€620.00