Your cart
There are no more items in your cart
Catalog
Active filters
S30A-4011CA - Laser Scanner - SICK
S30A-4011CA
This S3000 series laser scanner has four protection fields and four servo fields that are freely programmable using your SICK software. You can therefore configure your laser scanner according to the conditions of your installation.
This SICK S30A-4011CA scanner is at your disposal to replace your defective equipment.
€2,585.00
DBSC102-GAAW - Servo Controller - BALDOR
DBSC102-GAAW
This reference drive DBSC102-GAAW and brand BALDOR is a servo controller for Brushless AC motor.
Input: AC230V 50/60Hz, 1PH, Output: 2A/ACO-230V, RS232 interface, binary encoder simulation, 0.87kVA.
This BALDOR servo controller is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€460.00
DBSC1110-GAAW - Servo Controller - BALDOR
DBSC1110-GAAW
This reference drive DBSC1110-GAAW and brand BALDOR is a servo controller for Brushless AC motor.
Input: AC230V 50/60Hz, 3PH, Output: 10A/ACO-250V, RS232 interface, binary encoder simulation.
This BALDOR servo controller is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€580.00
MDH2A02TB-RB23 - Motion Controller - BALDOR
MDH2A02TB-RB23
This reference motion controller MDH2A02TB-RB23 and brand BALDOR is a controller for Brushless AC motor. MintDrive II range.
Desc: 2.5A/24V/DB/Res/2CAN
Input: AC230V 50/60Hz, Single Phase
Output: 2.5A/ACO-230V
This BALDOR motion controller is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€850.00
FPH4A02TB-RN23 - Servo drive - BALDOR
FPH4A02TB-RN23
This reference servo drive FPH4A02TB-RN23 and brand BALDOR is a servo drive for Brushless AC motor. Flex + Drive II range.
Desc: F + DII-415V / 2.5A / 24V / DB / Res
Input: AC400-480V 50/60Hz, Three Phase
Output: 2.5A / ACO-460V
This BALDOR servo drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€710.00
BSM63N-175AA - Servo Motor brushless - BALDOR
BSM63N-175AA
This reference motor BSM63N-175AA and brand BALDOR is a Brushless AC motor. N series range.
TORQ CONT STALL: 0.77 NM, CUR CONT STALL / A RMS: 1,01, POWER: 0,24kW, RATED SPEED / RPM: 4000, RATED BUS VOLTS: : 10000
This BALDOR engine is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€520.00
BSM50N-275AA - Servo Motor brushless - BALDOR
BSM50N-275AA
This reference motor BSM50N-275AA and brand BALDOR is a Brushless AC motor. N series range
TORQ CONT STALL: 0.91 NM, CUR CONT STALL / A RMS: 1.42, POWER: 0.18kW, RATED SPEED / RPM: 2000, RATED BUS VOLTS: MECH SPEED: 10000
This BALDOR motor is at your disposal to replace your equipment and has a guarantee adapted to your needs
€580.00
BSM63N-275BA - Servo Motor brushless - BALDOR
BSM63N-275BA
This reference motor BSM63N-275BA and brand BALDOR is a Brushless AC motor. N series range
TORQ CONT STALL: 1,47 NM, CUR CONT STALL / A RMS: 1,94, POWER: 0,53kW, RATED SPEED / RPM: 4000, RATED BUS VOLTS: MECH SPEED: 10000
This BALDOR engine is at your disposal to replace your equipment and has a guarantee adapted to your needs
€620.00
S30A-4011BA - Laser Scanner - SICK
S30A-4011BA
This S3000 Series safety laser scanner features 1 protective field set and four servo fields that are freely programmable using your SICK software. You can therefore configure your laser scanner according to the conditions of your installation.
Protective Field range : 4 meters
This SICK S30A-4011BA scanner is at your disposal to replace your defective...
€2,220.00
S30A-7011CA - Laser Scanner - SICK
S30A-7011CA
This S3000 series safety laser scanner features 4 protective field sets and 12 control fields that are freely programmable using your SICK software. You can therefore configure your laser scanner according to the conditions of your installation.
Protective Field range : 7 m.
This SICK S30A-7011CA scanner is at your disposal to replace your defective...
€715.00
SBSC1115 - Servo Controller - BALDOR
SBSC1115
This SBSC1115 brushless reference and brand BALDOR is a drive for Brushless AC motor. SBSC 1000/1100 Series
Input: 3AC 230V 50 / 60Hz, 3PH, Output: 15A / ACO-250V, RS232 Interface, Binary Encoder Simulation.
This BALDOR drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€720.00
FD2A02TR-RN20 - Servo Drive - BALDOR
FD2A02TR-RN20
This reference servo drive FD2A02TR-RN20 and brand BALDOR is a Brushless motor drive. FLEXDRIVE range.
Rated voltage: 230V, output current: 2.5A, 10A input circuit breaker
This BALDOR drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€860.00
SBSC1102 - Servo Controller - BALDOR
SBSC1102
This SBSC1102 brushless reference and BALDOR brand is a Brushless AC motor drive. SBSC 1000/1100 Series
Input: AC230V 50 / 60Hz, 3PH, Output: 2A / ACO-250V, RS232 Interface, Binary Encoder Simulation.
This BALDOR drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€1,170.00
SBSC1105 - Servo Controller - BALDOR
SBSC1105
This SBSC1105 brushless reference and BALDOR brand is a Brushless AC motor drive. SBSC 1000/1100 Series
Input: AC230V 50 / 60Hz, 3PH, Output: 5A / ACO-250V, RS232 Interface, Binary Encoder Simulation.
This BALDOR drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€3,345.00
BSC1010 - Servo Controller - BALDOR
BSC1010
This brushless reference drive BSC1010 and BALDOR brand is a drive for Brushless AC motor. BSC 1000/1100 Series
Input: DC320V Output: 10A / ACO-250V
This BALDOR drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€1,240.00
BSM90N-175AA - Servo Motor brushless - BALDOR
BSM90N-175AA
This reference motor BSM90N-175AA and brand BALDOR is a Brushless motor AC.Gamme C series
TORQ CONT STALL: 6 NM, CUR CONT STALL / AT RMS: 8.07, POWER: 0.53kW, RATED SPEED / RPM: 4000, RATED BUS VOLTS: 300, PEAK CUR / AT RMS: 29.05, MAX MECH SPEED 6000
This BALDOR Engine is at your disposal to replace your equipment and has a guarantee adapted to your needs
€1,060.00
BSC1115-24 - Servo Controller - BALDOR
BSC1115-24
This brushless reference drive BSC1115-24 and BALDOR brand is a drive for Brushless AC motor. BSC 1000/1100 Series
Input: AC230V, 50/60Hz, Three phase Output: 15A / ACO-250V
This BALDOR drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€3,210.00
S30A-6011EA - Laser Scanner - SICK
S30A-6011EA
This safety laser scanner can only be used in combination with the EFI system group, eg. with a Flexi Soft safety control system or another S300 or S3000 safety laser scanner.
Range: 5.5 m
This SICK S30A-6011EA scanner is at your disposal to replace your defective equipment.
€2,560.00
S30A-7011EA - Laser Scanner - SICK
S30A-7011EA
This S3000 Series safety laser scanner features 1 protective field set and 64 servo fields that are freely programmable using your SICK software. You can therefore configure your laser scanner according to the conditions of your installation.
Protective Field range : 7 meters
This SICK S30A-7011EA scanner is at your disposal to replace your defective...
€890.00
BSC1010-24 - Servo Controller - BALDOR
BSC1010-24
This brushless reference drive BSC1010-24 and BALDOR brand is a drive for Brushless AC motor. BSC 1000/1100 Series
Input: DC : 320V Output : 10A / AC : O-250V
This BALDOR drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€1,240.00
SBSC1110-1 - Servo Controller - BALDOR
SBSC1110-1
This SBSC1110-1 brushless reference and BALDOR brand is a Brushless AC motor drive. SBSC 1000/1100 Series
Input : 1AC120V 50/60Hz, 1PH, Output : 10A/ACO-320V
This BALDOR drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€710.00
FX3-CPU000000 - Security module - SICK
FX3-CPU000000
This FX3-CPU000000 main module from the Flexi Soft range is configurable by software (Flexi Soft Designer).
24Vdc, category 4. Main module sold without system connector (FX3-MPL000001)
This FX3-CPU000000 module from SICK is at your disposal to replace your defective hardware.
€499.00
FX3-MPL000001 - Connector for security module - SICK
FX3-MPL000001
This connector for main module FX3-MPL000001 from the Flexi Soft range is for FX3-CPU0 or FX3-CPU1 modules.
System connector: Flexi-Soft system power supply and save system configuration (without EFI-enabled devices). screw terminal blocks
This FX3-MPL000001 connector from SICK is at your disposal to replace your defective equipment.
€125.00
FX3-XTDI80002 - I/O module - SICK
FX3-XTDI80002
This FX3-XTDI80002 input/output module from the Flexi Soft range is configurable by software (Flexi Soft Designer).
8 inputs and 8 outputs. Category 4
This FX3-XTDI80002 module from SICK is at your disposal to replace your defective hardware.
€155.00
V30W-0101000 - Security camera - SICK
V30W-0101000
This security camera from the V300 range and reference V30W-0101000 has a protective field range of up to 2m12.
Response time: 20ms. Category 3.
This V30W-0101000 camera from SICK is at your disposal to replace your defective equipment.
€1,550.00
CLV621-0120 - Barcode reader - SICK
CLV621-0120
This barcode reader from the CLV62X range and reference CLV621-0120 has a reading range of 60 to 730mm.
10V...30V, Ethernet connection
This SICK brand CLV621-0120 reader is at your disposal to replace your defective equipment.
€1,950.00
WT18-3P430 - Photoelectric Sensor - SICK
WT18-3P430
This WT18-3P430 Photoelectric Sensor from the W18-3 range has an LED emission source.
10Vdc...30Vdc, 4-turn potentiometer. PNP switching output
This SICK brand Photoelectric Sensor WT18-3P430 is at your disposal to replace your defective equipment.
€330.00
WEU 26/2-130 - safety switches - SICK
WEU 26/2-130
This WEU 26/2-130 safety light curtain is from the WSU/WEU26-3 range.
24Vdc, sweep page: 70m
This WEU 26/2-130 barrier from SICK is at your disposal to replace your defective equipment.
€265.00
FX0-GCAN00000 - Security module - SICK
FX0-GCAN00000
This FX0-GCAN00000 main module from the Flexi Soft range is configurable by software (Flexi Soft Designer).
CANOPEN fieldbus, powered by Flexibus+
This FX0-GCAN00000 module from SICK is at your disposal to replace your defective equipment.
€980.00
FX0-GENT00000 - Security module - SICK
FX0-GENT00000
This FX0-GENT00000 main module from the Flexi Soft range is configurable by software (Flexi Soft Designer).
ETHERNET fieldbus, powered by Flexibus+
This FX0-GENT00000 module from SICK is at your disposal to replace your defective equipment.
€1,175.00
FX3-XTIO84002 - I/O module - SICK
FX3-XTIO84002
This FX3-XTIO84002 input/output module from the Flexi Soft range is configurable by software (Flexi Soft Designer).
8 inputs and 6 outputs. Category 4
This FX3-XTIO84002 module from SICK is at your disposal to replace your defective hardware.
€495.00
FX3-CPU130002 - Security module - SICK
FX3-CPU130002
This FX3-CPU130002 main module from the Flexi Soft range is configurable by software (Flexi Soft Designer).
Main module without system connector
This module from SICK is at your disposal to replace your defective hardware.
€505.00
FX0-GPRO00000 - Security module - SICK
FX0-GPRO00000
This FX0-GPRO00000 main module from the Flexi Soft range is configurable by software (Flexi Soft Designer).
Main module without system connector
This module from SICK is at your disposal to replace your defective hardware.
€1,800.00
FX0-GMOD00000 - Security module - SICK
FX0-GMOD00000
This FX0-GMOD00000 main module from the Flexi Soft range is configurable by software (Flexi Soft Designer).
Main module without system connector
This module from SICK is at your disposal to replace your defective hardware.
€1,600.00