Catalog

Showing 37-72 of 102 item(s)

UNI 4401 - Synchron Controller - CONTROL TECHNIQUES

UNI 4401

This reference CONTROL TECHNIQUES speed controller UNI 4401 is a drive for asynchronous and synchronous motor. Inverter 45 kW, 96A, 380-480V This UNI 4401 speed controller is at your disposal to replace defective equipment and has a guarantee adapted to your needs. Speed controller reconditioned and tested in full load (test of duration) on CONTROL...

€3,990.00

UNI 4402 - Synchron Controller - CONTROL TECHNIQUES

UNI 4402

This reference CONTROL TECHNIQUES speed controller UNI 4402 is a drive for asynchronous and synchronous motor. Inverter 55 kW, 124A, 380-480V This UNI 4402 speed controller is at your disposal to replace defective equipment and has a guarantee adapted to your needs. Speed controller reconditioned and tested in full load (test of duration) on CONTROL...

€3,480.00

UNI 4403 - Synchron Controller - CONTROL TECHNIQUES

UNI 4403

€7,280.00

UNI 4404 - Synchron Controller - CONTROL TECHNIQUES

UNI 4404

This reference CONTROL TECHNIQUES speed controller UNI 4404 is a drive for asynchronous and synchronous motor. Inverter 90 kW, 180A, 380-480V This UNI 4404 speed controller is at your disposal to replace defective equipment and has a guarantee adapted to your needs. Speed controller reconditioned and tested in full load (test of duration) on CONTROL...

€7,480.00

UNI 4405 - Synchron Controller - CONTROL TECHNIQUES

UNI 4405

This reference CONTROL TECHNIQUES speed controller UNI 4405 is a drive for asynchronous and synchronous motor. Inverter 110 kW, 202A, 380-480V This UNI 4405 speed controller is at your disposal to replace defective equipment and has a guarantee adapted to your needs. Speed controller reconditioned and tested in full load (test of duration) on CONTROL...

€7,890.00

UD71 - Communications interface module - CONTROL TECHNIQUES

UD71

This CONTROL TECHNIQUES communication interface module UD71 is a module for the UNIDRIVE range. The UD71 provides the ability to read and write values in the UNIDRIVE drive parameters and can act as a slave module. This CONTROL TECHNIQUES interface module is at your disposal to replace your defective equipment and has a warranty.

€410.00

UMV 4301 8T - Synchron Controller - LEROY SOMER

UMV 4301 8T

This reference LEROY SOMER speed controller UMV 4301 8T is a drive for asynchronous and synchronous motor. Inverter 5,5 kW, 12 A, 380-480V This UMV 4301 8T speed controller is at your disposal to replace defective equipment and has a guarantee adapted to your needs. Speed controller reconditioned and tested in full load (test of duration) on LEROY SOMER...

€1,015.00

UMV 4301 11T - Synchron Controller - LEROY SOMER

UMV 4301 11T

This reference LEROY SOMER speed controller UMV 4301 11T is a drive for asynchronous and synchronous motor. Inverter 7,5 kW, 16 A, 380-480V This UMV 4301 11T speed controller is at your disposal to replace defective equipment and has a guarantee adapted to your needs. Speed controller reconditioned and tested in full load (test of duration) on LEROY...

€1,470.00

UMV 4301 16T - Synchron Controller - LEROY SOMER

UMV 4301 16T

This reference LEROY SOMER speed controller UMV 4301 16T is a drive for asynchronous and synchronous motor. Inverter 11 kW, 25 A, 380-480V This UMV 4301 16T speed controller is at your disposal to replace defective equipment and has a guarantee adapted to your needs. Speed controller reconditioned and tested in full load (test of duration) on LEROY...

€1,685.00

C3S025V2 - Servo drive - PARKER

C3S025V2

This PARKER servo drive reference C3S025V2 is part of the COMPAX3 series. C3S025V2: 1 phase 230V, 2.5A, 1kVA. This PARKER drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€290.00

C3S063V2 - Servo drive - PARKER

C3S063V2

This PARKER servo drive reference C3S063V2 is part of the COMPAX3 series. C3S063V2: 1 phase 230V, 6.3A, 2.5kVA. This PARKER drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€325.00

C3S100V2 - Servo drive - PARKER

C3S100V2

This PARKER servo drive reference C3S100V2 is part of the COMPAX3 series. C3S100V2: 3 phases 230V, 10A, 4kVA. This PARKER drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,615.00

C3S150V2 - Servo drive - PARKER

C3S150V2

This PARKER servo drive reference C3S150V2 is part of the COMPAX3 series. C3S150V2: 3 phases 230V, 15A, 6kVA. This PARKER drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,260.00

C3S015V4 - Servo drive - PARKER

C3S015V4

This PARKER servo drive reference C3S015V4 is part of the COMPAX3 series. C3S015V4: 3 phases 400/480V, 1.5A, 1.25kVA. This PARKER drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€380.00

C3S038V4 - Servo drive - PARKER

C3S038V4

This PARKER servo drive reference C3S038V4 is part of the COMPAX3 series. C3S038V4: 3 phases 400/480V, 3.8A, 3.1kVA. This PARKER drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€390.00

C3S075V4 - Servo drive - PARKER

C3S075V4

This PARKER servo drive reference C3S075V4 is part of the COMPAX3 series. C3S075V4: 3 phases 400/480V, 7.5A, 6.2kVA. This PARKER drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€815.00

C3S150V4 - Servo drive - PARKER

C3S150V4

This PARKER servo drive reference C3S150V4 is part of the COMPAX3 series. C3S150V4 : 3 phases 400/480V, 15A, 11.5kVA. This PARKER drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,260.00

C3S300V4 - Servo drive - PARKER

C3S300V4

This PARKER servo drive reference C3S300V4 is part of the COMPAX3 series. C3S300V4 : 3 phases 400/480V, 30A, 25kVA. This PARKER drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€2,650.00

C3H050V4 - Servo drive - PARKER

C3H050V4

This PARKER servo drive reference C3H050V4 is part of the COMPAX3 series. C3H050V4: 3 phases 400/480V, 50A, 35kVA. This PARKER drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€900.00

C3H090V4 - Servo drive - PARKER

C3H090V4

This PARKER servo drive reference C3H090V4 is part of the COMPAX3 series. C3H090V4: 3 phases 400/480V, 90A, 70kVA. This PARKER drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,000.00

C3H125V4 - Servo drive - PARKER

C3H125V4

This PARKER servo drive reference C3H125V4 is part of the COMPAX3 series. C3H125V4: 3 phases 400/480V, 125A, 91kVA. This PARKER drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,090.00

C3H155V4 - Servo drive - PARKER

C3H155V4

This PARKER servo drive reference C3H155V4 is part of the COMPAX3 series. C3H155V4 : 3 phases 400/480V, 155A, 109kVA. This PARKER drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,200.00

SI-PROFIBUS - Interface module - CONTROL TECHNIQUES

SI-PROFIBUS

This SI-PROFIBUS interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with M200, M300, M400, M600, M700 drives This SI-PROFIBUS Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,250.00

SM-Applications Plus - Interface module - CONTROL TECHNIQUES

SM-Applications Plus

This SM-Applications Plus interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-Applications Plus Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€165.00

SM-CANopen - Interface module - CONTROL TECHNIQUES

SM-CANopen

This SM-CANopen interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-CANopen Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€3,926.00

SM-DEVICENET - Interface module - CONTROL TECHNIQUES

SM-DEVICENET

This SM-DEVICENET interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-DEVICENET Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€130.00

SM-ETHERNET - Interface module - CONTROL TECHNIQUES

SM-ETHERNET

This SM-ETHERNET interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-ETHERNET Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€420.00

SM-EZMOTION - Interface module - CONTROL TECHNIQUES

SM-EZMOTION

This SM-EZMOTION interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Mentor MP drives. This SM-EZMOTION Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€420.00

SM-I/O plus - Interface module - CONTROL TECHNIQUES

SM-I/O plus

This SM-I/O plus interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-I/O plus Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€195.00

SM-Resolver - Interface module - CONTROL TECHNIQUES

SM-Resolver

This SM-Resolver interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-Resolver Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€450.00

SM-PROFIBUS DP - Interface module - CONTROL TECHNIQUES

SM-PROFIBUS DP

This SM-PROFIBUS DP interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-PROFIBUS DP Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€145.00

SM-Universal - Interface module - CONTROL TECHNIQUES

SM-Universal Encoder Plus - Interface module - CONTROL TECHNIQUES

SM-Universal Encoder Plus

This SM-Universal Encoder Plus interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-Universal Encoder Plus Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to...

€140.00

UD50 - option module - CONTROL TECHNIQUES

UD50

This CONTROL TECHNIQUES option module reference UD50 is an I/O module interface for the UNIDRIVE range. The small optional UD50 module is an interface module to be installed in a Unidrive. This UD50 option module is at your disposal in supply or in standard exchange to replace your defective equipment and has a guarantee

€389.00

UD501 - option module - CONTROL TECHNIQUES

UD51 - option module - CONTROL TECHNIQUES

UD51

This CONTROL TECHNIQUES option module reference UD51 is a encoder module interface for the UNIDRIVE range. The small optional UD51 module is an interface module to be installed in a Unidrive. This UD51 option module is at your disposal in supply or in standard exchange to replace your defective equipment and has a guarantee

€195.00

UD70 - Option module - CONTROL TECHNIQUES

UD70

This CONTROL TECHNIQUES option module reference UD70 is a module for the UNIDRIVE range The UD70 is a compact microcomputer contained in a large option module for easy installation in any size Unidrive. This CONTROL TECHNIQUES interface module is available as a supply to replace your defective equipment and has a guarantee

€590.00

SM-Applications - Interface module - CONTROL TECHNIQUES

SM-Applications

This SM-Applications interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-Applications Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€120.00