Catalog

Showing 1-36 of 82 item(s)

JZNC-XPP02B - Teach Pendant - YASKAWA

JZNC-XPP02B

This Teach Pendant YASKAWA and reference JZNC-XPP02B is used for the robots XRC MOTOMAN / Yasnac Easy multi-language interface and high performance thanks to its RISC processor. This Teach Pendant YASKAWA is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€2,100.00

JUSP-WS30AB - Amplifier - YASKAWA

JUSP-WS30AB

This JUSP-WS30AB and YASKAWA drive is a controller for XRC robot control unit. 2,2 kW Amplifier for Servopack CACR-SK45AAB and CACR-SK16MAAB. This JUSP-WS30AB YASKAWA drive is at your disposal to replace your defective equipment and has a warranty adapted to your needs.

€950.00

JANCD-XEW01-1 - Control board - YASKAWA

JANCD-XEW01-1

This control board JANCD-XEW01-1 and brand YASKAWA is a control board for XRC robot control unit. XEW01-01: Analog output x 3 ports + Status signal Input of a welder This JANCD-XEW01-1 YASKAWA card is at your disposal to replace your defective hardware and has a warranty adapted to your needs.

€370.00

JANCD-MFB01-1 - Control board - YASKAWA

JANCD-MFB01-1

This interface board JANCD-MFB01-1 and YASKAWA is an interface board for XRC robot control unit. Fieldbus system via standard AnyBus modules This JANCD-MFB01-1 YASKAWA interface board is available to replace your defective equipment and has a guarantee adapted to your needs.

€640.00

JARCR-XEB01-1 - Backboard Card - YASKAWA

JARCR-XEB01-1

This expansion card JANCD-XEB01-1 and brand YASKAWA is an expansion card for XRC robot control unit. Backboard card for JANCD-MFB01 This JANCD-XEB01-1 YASKAWA card is at your disposal to replace your defective hardware and has a warranty adapted to your needs.

€380.00

JZRCR-XSU02 - Servo Controller - YASKAWA

JZRCR-XSU02

This drive JZRCR-XSU02 and YASKAWA is a drive for XRC robot control unit. For type: SV3X, UP6, S16X, UP20, UP50, UP20M, SK45X, SK16MX, SP70X .. This YASKAWA JZRCR-XSU02 drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€640.00

JUSP-ACP05JAB - Converter - YASKAWA

JUSP-ACP05JAB

This YASKAWA converter is composed of 2 modules: JUSP-ACP05JAB. It is used in CACR-SV3AAA servopacks, CACR-UP6AAC, CACR-SK16AAC, CACR-UP20AAA. Capacity of 5A. This YASKAWA converter is at your disposal to replace your defective equipment. It is sold with a guarantee of operation adapted to your needs.

€1,180.00

JUSP-WSCA01AA + JUSP-WSCB01AA - Amplifier - YASKAWA

JUSP-WSCA01AA + JUSP-WSCB01AA

This amplifier JUSP-WSCA01AA + JUSP-WSCB01AA and YASKAWA is a amplifier for XRC robot control unit. 100W Amplifier for Servopack CACR-UP6AAC, CACR-SV3AAA This amplifier JUSP-WSCA01AA + JUSP-WSCB01AA is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€320.00

JUSP-WSCB05AA + JUSP-WSCA05AA + JUSP-WSCD05AA - Amplifier - YASKAWA

JUSP-WSCB05AA+WSCA05AA+WSCD05AA

This amplifier JUSP-WSCB05AA + JUSP-WSCA05AA + JUSP-WSCD05AA and YASKAWA brand is a drive for XRC robot control unit. 500W Amplifier for Servopack CACR-UP6AAC, CACR-SV3AAA This amplifier JUSP-WSCB05AA + JUSP-WSCA05AA + JUSP-WSCD05AA is at your disposal to replace your defective hardware.

€310.00

JUSP-WSCD10AA+JUSP-WSCA10AA+JUSP-WSCB10AA - Amplifier - YASKAWA

JUSP-WSCD10AA+WSCA10AA+WSCB10AA

This amplifier JUSP-WSCD10AA+JUSP-WSCA10AA+JUSP-WSCB10AA and YASKAWA brand is a drive for XRC robot control unit. 1kW Amplifier for Servopack CACR-UP6AAC, CACR-SV3AAA This amplifier JUSP-WSCD10AA+JUSP-WSCA10AA+JUSP-WSCB10AA is at your disposal to replace your defective hardware.

€640.00

JUSP-WSCB05AA + JUSP-WSCB05AA + JUSP-WSCD10AA - Amplifier - YASKAWA

JUSP-WSCB05AA+WSCB05AA+WSCD10AA

This amplifier JUSP-WSCB05AA + JUSP-WSCB05AA + JUSP-WSCD10AA and YASKAWA brand is a drive for XRC robot control unit. 500W Amplifier for Servopack CACR-UP6AAC, CACR-SV3AAA This amplifier JUSP-WSCB05AA + JUSP-WSCB05AA + JUSP-WSCD10AA is at your disposal to replace your defective hardware.

€410.00

JUSP-ACPA05JAA + JUSP-ACPCB05JAA - Converter - YASKAWA

JUSP-ACPA05JAA + JUSP-ACPCB05JAA

This YASKAWA converter is composed of 2 modules: JUSP-ACPA05JAA + JUSP-ACPCB05JAA. It is used in CACR-SV3AAA servopacks, CACR-UP6AAC, CACR-SK16AAC, CACR-UP20AAA. Capacity of 5A. This YASKAWA converter is at your disposal to replace your defective equipment. It is sold with a guarantee of operation adapted to your needs.

€920.00

JUSP-RCP01AAC - Power Supply Module - YASKAWA

JUSP-RCP01AAC

This YASKAWA power supply module is reference JUSP-RCP01AAC. It is used several YASKAWA servopacks. This power supply module generates a DC power supply (+ 5V, + 7V, ± 15V) for servo control. The AC input (single phase: 200/220 VAC) is provided by the power supply. This YASKAWA module is at your disposal to replace your defective equipment.

€420.00

JANCD-XCP01-1 - CPU Control Board - YASKAWA

JANCD-XCP01-1

YASKAWA CPU and reference card JANCD-XCP01-1 is used with the XRC MOTOMAN controller. Includes JANCD-XIF03-1 and JANCD-XMM01-2 cards This CPU JANCD-XCP01-1 is at your disposal to replace your defective equipment and has a guarantee of operation adapted to your needs.

€1,050.00

CPS-150F - Power Supply - YASKAWA

CPS-150F

This YASKAWA/YASNAC CN05 and CPS-150F Power Supply is used for the NX100 and XRC MOTOMAN series. Input voltage - 200-230 V AC, frequency - 50/60 Hz, current - 2.1 A This CPS-150F power supply is at your disposal to replace your defective equipment and has a guarantee of operation adapted to your needs.

€940.00

JZNC-XRK01B-1 - CPU Rack - YASKAWA

JZNC-XRK01B-1

This JZNC-XRK01B-1 reference and YASKAWA brand rack is for YASNAC XRC. The CPU Rack (JZNC-XRK01X-X) does not include any cards. BLANK RACK. This rack JZNC-XRK01B-1 is at your disposal to replace your defective equipment and has a guarantee of operation adapted to your needs.

€290.00

TSXASY800 - Output Module - TELEMECANIQUE

TSXASY800

This analog output module TELEMECANIQUE is reference TSXASY800. It is part of the MODICON PREMIUM range This TELEMECANIQUE output module (8) is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Module reconditioned and tested on PLC bench (Test 100%).

€1,000.00

A06B-6059-H206 - AC Spindle Amplifier - FANUC

A06B-6059-H206

This AC Spindle amplifier A06B-6059-H206 and brand FANUC is a drive (6S). This drive belongs to the FANUC S series range. Digital model - Fanuc S Series Spindle Servo Unit. Fanuc 0MC, 0TC, 12, 16, 18, 21 controls. This drive A06B-6059-H206 Fanuc is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,520.00

On sale!

A06B-6058-H005 - Servo Amplifier - FANUC

A06B-6058-H005

This FANUC Servo Amplifier controller (series 6058) A06B-6058-H005 is designed to control FANUC motors 0S, 10S, 20S/1500, 10T/2000, 0T/3000. This 1 axis controller is complete; it includes the reference control board A20B-1003-0090 and power controller board A20B-1003-0081 This A06B-6058-H005 drive is available to replace your defective part and...

€390.00

TSX3705001 - PLC - SCHNEIDER ELECTRIC

TSX3705001

Schneider Electric PLC / Telemecanique reference TSX3705001. Modicon PLC Micro. Modicon TSX Micro - Tsx 3705 ca This Schneider TSX3705001 is at your disposal to replace your defective equipment and has a warranty adapted to your needs. PLC SCHNEIDER reconditioned and tested under full load (duration test) on TSX Micro Modicon bench.

€380.00

A06B-6059-H003 - AC Spindle Amplifier - FANUC

A06B-6059-H003

This AC Spindle amplifier A06B-6059-H003 and brand FANUC is a drive (3S - 6000 rpm). This drive belongs to the FANUC S series range. Digital model - Fanuc S Series Spindle Servo Unit. Fanuc 0MC, 0TC, 12, 16, 18, 21 controls. This drive A06B-6059-H003 Fanuc is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€2,195.00

TSXASY410 - Output Module - TELEMECANIQUE

TSXASY410

This analog output module TELEMECANIQUE is reference TSXASY410. It is part of the MODICON PREMIUM range This TELEMECANIQUE output module (4) is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Module reconditioned and tested on PLC bench (Test 100%).

€1,200.00

TSX3708001 - PLC - SCHNEIDER ELECTRIC

TSX3708001

Schneider Electric PLC / Telemecanique reference TSX3708001. Modicon PLC Micro. TSX MICRO 3708 100/240 VAC BASE 3 SLOTS This Schneider TSX3708001 is at your disposal to replace your defective equipment and has a warranty adapted to your needs. PLC SCHNEIDER reconditioned and tested under full load (duration test) on TSX Micro Modicon bench.

€575.00

TSX3710001 - PLC - SCHNEIDER ELECTRIC

TSX3710001

Schneider Electric PLC / Telemecanique reference TSX3710001. Modicon PLC Micro. BASIC RACK 2 LOCATIONS 100-240VAC POWER SUPPLY This Schneider TSX3710001 is at your disposal to replace your defective equipment and has a warranty adapted to your needs. PLC SCHNEIDER reconditioned and tested under full load (duration test) on TSX Micro Modicon bench.

€450.00

TSX3705028DR1 - PLC - SCHNEIDER ELECTRIC

TSX3705028DR1

Schneider Electric PLC / Telemecanique reference TSX3705028DR1. Modicon PLC Micro. TSX 3705 Alternating Current 16 24 VDC inputs, 12 relay outputs This Schneider TSX3705028DR1 is at your disposal to replace your defective equipment and has a warranty adapted to your needs. PLC SCHNEIDER reconditioned and tested under full load (duration test) on TSX Micro...

€2,149.00

TSX3708056DR1 - PLC - SCHNEIDER ELECTRIC

TSX3708056DR1

Schneider Electric PLC / Telemecanique reference TSX3708056DR1. Modicon PLC Micro. TSX 3705 Alternating Current 16 24 VDC inputs, 12 relay outputs This Schneider TSX3708056DR1 is at your disposal to replace your defective equipment and has a warranty adapted to your needs. PLC SCHNEIDER reconditioned and tested under full load (duration test) on TSX Micro...

€1,240.00

A06B-6058-H002 - Servo Amplifier - FANUC

A06B-6058-H002

This FANUC Servo Amplifier series 6058 and reference A06B-6058-H002 is designed to control FANUC motors of type 4-0S, 3-0S. This 1 axis drive is complete; it includes the reference control board A20B-1002-0730 and the power board A20B-1002-0740. This A06B-6058-H002 drive is at your disposal to replace your defective equipment and has a guarantee...

€1,140.00

A06B-6058-H003 - Servo Amplifier - FANUC

A06B-6058-H003

This FANUC Servo Amplifier series 6058 and reference A06B-6058-H003 is designed to control FANUC motors of type 2-0S, 1-0S. This 1 axis drive is complete; it includes the reference control board A20B-1003-0030. This A06B-6058-H003 drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€500.00

A06B-6058-H004 - Servo Amplifier - FANUC

A06B-6058-H004

This FANUC Servo Amplifier series 6058 and reference A06B-6058-H004 is designed to control FANUC motors of type 0S, 5S, 5T/2000. This 1 axis drive is complete; it includes the reference control board A20B-1003-0090 and the power board A20B-1003-0140. This A06B-6058-H004 drive is at your disposal to replace your defective equipment and has a...

€440.00

A06B-6058-H006 - Servo Amplifier - FANUC

A06B-6058-H006

This FANUC Servo Amplifier series 6058 and reference A06B-6058-H006 is designed to control FANUC motors of type 20S, 30S. This 1 axis drive is complete; it includes the reference control board A20B-1003-0090 and the power board A20B-1003-0081. This A06B-6058-H006 drive is at your disposal to replace your defective equipment and has a guarantee...

€520.00

A06B-6058-H007 - Servo Amplifier - FANUC

A06B-6058-H007

This FANUC Servo Amplifier series 6058 and reference A06B-6058-H007 is designed to control FANUC motors of type 20S/3000, 30S/3000, 40S/2000. This 1 axis drive is complete; it includes the reference control board A16B-1100-0300. This A06B-6058-H007 drive is at your disposal to replace your defective equipment and has a guarantee adapted to your...

€980.00

A06B-6058-H023 - Servo Amplifier - FANUC

A06B-6058-H023

This FANUC Servo Amplifier series 6058 and reference A06B-6058-H023 is designed to control FANUC motors of type 2-0S, 1-0S/3000. This 1 axis drive is complete; it includes the reference control board A20B-1003-0090 and the power board A20B-1003-0141. This A06B-6058-H023 drive is at your disposal to replace your defective equipment and has a...

€1,120.00

A06B-6058-H025 - Servo Amplifier - FANUC

A06B-6058-H025

This FANUC Servo Amplifier series 6058 and reference A06B-6058-H025 is designed to control FANUC motors of type 5S/3000, 10S/3000, 5T/3000, 10T/3000. This 1 axis drive is complete; it includes the reference control board A20B-1003-0090 and the power board A20B-1003-0084. This A06B-6058-H025 drive is at your disposal to replace your defective...

€590.00

A06B-6058-H101 - Servo Amplifier - FANUC

A06B-6058-H101

This FANUC Servo Amplifier series 6058 and reference A06B-6058-H101 is designed to control FANUC motors of type 50S. This 1 axis drive is complete; it includes the reference control board A16B-1100-0300. This A06B-6058-H101 drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€2,200.00

A06B-6058-H102 - Servo Amplifier - FANUC

A06B-6058-H102

This FANUC Servo Amplifier series 6058 and reference A06B-6058-H102 is designed to control FANUC motors of type 60S, 70S. This 1 axis drive is complete; it includes the reference control board A16B-1100-0300. This A06B-6058-H102 drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€2,980.00

A06B-6058-H221 - Servo Amplifier - FANUC

A06B-6058-H221

This FANUC Servo Amplifier series 6058 and reference A06B-6058-H221 is designed to control FANUC type 2-0S, 1-0S, 1-0 / 3000, 2-0S motors for the L and M axes. This 2 axis drive is complete; it includes the reference control board A16B-1200-0800 and the power board A20B-1003-0271 or A20B-1004-0881. This A06B-6058-H221 drive is at your disposal to...

€860.00