A06B-6059-H003 - AC Spindle Amplifier - FANUC
This AC Spindle amplifier A06B-6059-H003 and brand FANUC is a drive (3S - 6000 rpm). This drive belongs to the FANUC S series range.
Digital model - Fanuc S Series Spindle Servo Unit. Fanuc 0MC, 0TC, 12, 16, 18, 21 controls.
This drive A06B-6059-H003 Fanuc is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
Modèle 3S digital - Fanuc S Series Spindle Servo Unit. AC Spindle Unit fitted with digital Fanuc 0MC, 0TC, 12, 16, 18, 21 controls
Check and clean the following items once every 6 months or so for using the AC spindle motor and AC spindle servo units under a normal condition for a long time.
Take the chek frequency into consideration according to the contamination degrees in each item.
If the ventilation hole, cooling fan, and fan finger guard of the AC spindle motor become dusty, the radiation efficiency of the motor drops. Clean the AC spindle motor by using the factory air and a vacuum cleaner.
If the cooling fan which compulsorily cools the radiator section of the AC spindle servo unit and the fan supplied with the unit adapter are used for a long period, the radiator section or regenaritive resistor may become dusty. In these case the cooling efficiency of the unit is lowered.
In the same manner as for the motor, clean the fanmotor section and radiator section.
FANUC is a Japanese manufacturer of industrial robots, machining centers and numerical controls for machine tools
Since its creation in 1956, when the company’s founder, Dr. Seiuemon Inaba, introduced the concept of digital controls, FANUC has always been at the forefront of manufacturing techniques in the world. Moving from the automation of a single machine in the late 1950s to the automation of entire production lines over the following decades.