Catalog

Showing 1-36 of 59 item(s)

TSXASY800 - Output Module - TELEMECANIQUE

TSXASY800

This analog output module TELEMECANIQUE is reference TSXASY800. It is part of the MODICON PREMIUM range This TELEMECANIQUE output module (8) is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Module reconditioned and tested on PLC bench (Test 100%).

€1,000.00

A06B-6093-H114 - Servo Amplifier - FANUC

A06B-6093-H114

This FANUC servo amplifier unit is reference A06B-6093-H114. Servo Amplifier SVU1-80 module with fiber optic interface. BETA range. Servo amplifier module : Input: 220-240V ~ (1PH) / 200-240V ~ (3PH) 27A (1PH) / 17A (3PH). Maximum output voltage: 240V ~. Rated output current: 15.0A FANUC servo amplifier unit reconditioned and tested on bench manufacturer...

€1,320.00

A06B-6093-H151 - Servo Amplifier - FANUC

A06B-6093-H151

This FANUC servo amplifier unit is reference A06B-6093-H151. Servo Amplifier SVU1-12 I / O module with fiber optic interface. BETA range. Servo amplifier module : Input: 220-240V ~ (1PH) / 200-240V ~ (3PH) 5.1A (1PH) / 3.2A (3PH). Maximum output voltage: 240V ~. Rated output current: 3.2A FANUC servo amplifier module reconditioned and tested on bench...

€1,480.00

TSX3705001 - PLC - SCHNEIDER ELECTRIC

TSX3705001

Schneider Electric PLC / Telemecanique reference TSX3705001. Modicon PLC Micro. Modicon TSX Micro - Tsx 3705 ca This Schneider TSX3705001 is at your disposal to replace your defective equipment and has a warranty adapted to your needs. PLC SCHNEIDER reconditioned and tested under full load (duration test) on TSX Micro Modicon bench.

€380.00

TSXP47455R - Interface Processor - TELEMECANIQUE

TSXP47455R

This TELEMECANIQUE and reference TSXP47455R processor card belongs to the Series 7 range. Module for TSX47-40 range Fipio / Fipway version 5.8 This Telemecanique TSXP47455R module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Refurbished and fully loaded power supply (time test) on TELEMECANIQUE bench.

€310.00

TSXRKD8FP - Rack - TELEMECANIQUE

TSXRKD8FP

This TELEMECANIQUE rack is reference TSXRKD8FP. It is part of the Series 7 range. UC rack (8 + 8) not venile. CPU Rack (8 + 8) no. fans. This TELEMECANIQUE rack is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Reconditioned rack and tested on automaton bench (Test 100%).

€495.00

TSXDST1682 - Output Module - TELEMECANIQUE

TSXDST1682

This TELEMECANIQUE digital output module is reference TSXDST1682. It is part of the TSX Series 7. 24 volts c.c. / static protected. 16 outputs. This TELEMECANIQUE output module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Module reconditioned and tested on a test bench (100% test).

€60.00

TSXP673 - Interface Processor - TELEMECANIQUE

TSXP673

This TELEMECANIQUE brand and TSXP673 reference processor card belongs to the TSX Series 7 range. Module for TSX67-30 Series Processor V: 2.30 This TELEMECANIQUE TSXP673 module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Module reconditioned and tested on a test bench (100% test).

€1,185.00

TSXP47420 - Interface Processor - TELEMECANIQUE

TSXP47420

This TELEMECANIQUE brand and TSXP47420 reference processor card belongs to the TSX Series 7 range. Module for TSX47-40 range version 4.3. Integrated unit link. 48k of internal RAM. 64k cartridge. This Télémécanique TSXP47420 module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€510.00

TSXSCM2116 - Communication Coupler - TELEMECANIQUE

TSXSCM2116

This TELEMECANIQUE communication module is reference TSXSCM2116. It is part of the TSX Series 7 series. Channel 0: Isolated RS232 C, Channel 1: UNI-TELWAY. This TELEMECANIQUE communication module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Module reconditioned and tested on a test bench (100% test).

€430.00

TSXMAPCPC742 - PC-Mapway board - TELEMECANIQUE

TSXMAPCPC742

This TELEMECANIQUE network coupler board is reference TSXMAPCPC742. It is part of the TSX Series 7 range. Used for the FTX 507 workstation. This TELEMECANIQUE network coupler module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Module reconditioned and tested on a test bench (100% test).

€1,065.00

TSXAXM162 - Axial command coupler - TELEMECANIQUE

TSXAXM162

This TELEMECANIQUE axial control coupler is reference TSXAXM162. It is part of the TSX Series 7 series. For MODICON TSX, analog, 3 inputs; 24VDC, 5 outputs. This TELEMECANIQUE axial command coupleur is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Module reconditioned and tested on a test bench (100% test).

€850.00

MDS-B-V1-10 - Servo drive - MITSUBISHI

MDS-B-V1-10

This MITSUBISHI axis drive, reference MDS-B-V1-10 is a servo drive of the MELDAS M500 series. MITSUBISHI MDS-B-V1-10 servo drive : 1 axis of 1 kW for servo motor HA80 and HA83. This MDS-B-V1-10 axis servo drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Servo drive tested on MITSUBISHI engine test...

€2,100.00

MDS-B-V1-01 - Servo drive - MITSUBISHI

MDS-B-V1-01

This MITSUBISHI axis drive, reference MDS-B-V1-01 is a servo drive of the MELDAS M500 series. MITSUBISHI MDS-B-V1-01 servo drive : 1 axis of 0.1 kW for servo motor HA053 and HA13. This MDS-B-V1-01 axis servo drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Servo drive tested on MITSUBISHI engine test...

€1,560.00

MDS-B-V1-03 - Servo drive - MITSUBISHI

MDS-B-V1-03

This MITSUBISHI axis drive, reference MDS-B-V1-03 is a servo drive of the MELDAS M500 series. MITSUBISHI MDS-B-V1-03 servo drive : 1 axis of 0.3 kW for servo motor HA23 and HA33. This MDS-B-V1-03 axis servo drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Servo drive tested on MITSUBISHI engine test...

€2,200.00

MDS-B-V1-05 - Servo drive - MITSUBISHI

MDS-B-V1-05

This MITSUBISHI axis drive, reference MDS-B-V1-05 is a servo drive of the MELDAS M500 series. MITSUBISHI MDS-B-V1-05 servo drive : 1 axis of 0.5 kW for servo motor HA40 and HA43. This MDS-B-V1-05 axis servo drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Servo drive tested on MITSUBISHI engine test...

€1,200.00

MDS-B-V1-20 - Servo drive - MITSUBISHI

MDS-B-V1-20

This MITSUBISHI axis drive, reference MDS-B-V1-20 is a servo drive of the MELDAS M500 series. MITSUBISHI MDS-B-V1-20 servo drive : 1 axis of 2 kW for servo motor HA100. This MDS-B-V1-20 axis servo drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Servo drive tested on MITSUBISHI engine test bench.

€2,800.00

MDS-B-V1-35 - Servo drive - MITSUBISHI

MDS-B-V1-35

This MITSUBISHI axis drive, reference MDS-B-V1-35 is a servo drive of the MELDAS M500 series. MITSUBISHI MDS-B-V1-35 servo drive : 1 axis of 3.5 kW for servo motor HA103 et HA200. This MDS-B-V1-35 axis servo drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Servo drive tested on MITSUBISHI engine test...

€1,750.00

MDS-B-V1-45 - Servo drive - MITSUBISHI

MDS-B-V1-45

This MITSUBISHI axis drive, reference MDS-B-V1-45 is a servo drive of the MELDAS M500 series. MITSUBISHI MDS-B-V1-45 servo drive : 1 axis of 4.5 kW for servo motor HA203 et HA300. This MDS-B-V1-45 axis servo drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Servo drive tested on MITSUBISHI engine test...

€1,350.00

MDS-B-V1-70 - Servo drive - MITSUBISHI

MDS-B-V1-70

This MITSUBISHI axis drive, reference MDS-B-V1-70 is a servo drive of the MELDAS M500 series. MITSUBISHI MDS-B-V1-70 servo drive : 1 axis of 7 kW for servo motor HA700. This MDS-B-V1-70 axis servo drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Servo drive tested on MITSUBISHI engine test bench.

€3,220.00

MDS-B-V1-90 - Servo drive - MITSUBISHI

MDS-B-V1-90

This MITSUBISHI axis drive, reference MDS-B-V1-90 is a servo drive of the MELDAS M500 series. MITSUBISHI MDS-B-V1-90 servo drive : 1 axis of 9 kW for servo motor HA900. This MDS-B-V1-90 axis servo drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Servo drive tested on MITSUBISHI engine test bench.

€5,300.00

MDS-B-V1-110 - Servo drive - MITSUBISHI

MDS-B-V1-110

This MITSUBISHI axis drive, reference MDS-B-V1-110 is a servo drive of the MELDAS M500 series. MITSUBISHI MDS-B-V1-110 servo drive : 1 axis of 11 kW for servo motor HA11K. This MDS-B-V1-110 axis servo drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Servo drive tested on MITSUBISHI engine test bench.

€1,375.00

MDS-B-V1-150 - Servo drive - MITSUBISHI

MDS-B-V1-150

This MITSUBISHI axis drive, reference MDS-B-V1-150 is a servo drive of the MELDAS M500 series. MITSUBISHI MDS-B-V1-150 servo drive : 1 axis of 15 kW for servo motor HA15K. This MDS-B-V1-150 axis servo drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Servo drive tested on MITSUBISHI engine test bench.

€1,300.00

A06B-6093-H113 - Servo Amplifier - FANUC

A06B-6093-H113

This FANUC servo amplifier unit is reference A06B-6093-H113. Servo Amplifier SVU1-40 module with fiber optic interface. BETA range. Servo amplifier module : Input: 220-240V ~ (1PH) / 200-240V ~ (3PH) 15A (1PH) / 9.4A (3PH). Maximum output voltage: 240V ~. Rated output current: 12.5A FANUC servo amplifier unit reconditioned and tested on bench manufacturer...

€1,450.00

MDS-B-V2-0101 - Servo drive - MITSUBISHI

MDS-B-V2-0101

This MITSUBISHI axis drive, reference MDS-B-V2-0101 is a servo drive of the MELDAS M500 series. MITSUBISHI MDS-B-V2-0101 servo drive : 2 axis of 0.1 kW for servo motor HA053 and HA13. This MDS-B-V2-0101 axis servo drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Servo drive tested on MITSUBISHI...

€1,215.00

MDS-B-V2-0301 - Servo drive - MITSUBISHI

MDS-B-V2-0301

This MITSUBISHI axis drive, reference MDS-B-V2-0301 is a servo drive of the MELDAS M500 series. MITSUBISHI MDS-B-V2-0301 servo drive : 2 axis of 0.1 kW and 0.3kW for servo motor HA23, HA33, HA053, HA13. This MDS-B-V2-0301 axis servo drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Servo drive tested...

€1,150.00

MDS-B-V2-0303 - Servo drive - MITSUBISHI

MDS-B-V2-0303

This MITSUBISHI axis drive, reference MDS-B-V2-0303 is a servo drive of the MELDAS M500 series. MITSUBISHI MDS-B-V2-0303 servo drive : 2 axis of 0.3 kW for servo motor HA23 and HA33. This MDS-B-V2-0303 axis servo drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Servo drive tested on MITSUBISHI engine...

€2,590.00

MDS-B-V2-0501 - Servo drive - MITSUBISHI

MDS-B-V2-0501

This MITSUBISHI axis drive, reference MDS-B-V2-0501 is a servo drive of the MELDAS M500 series. MITSUBISHI MDS-B-V2-0501 servo drive : 2 axis of 0.5 kW and 0.1 kW for servo motor HA053, HA13, HA40, HA43. This MDS-B-V2-0501 axis servo drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Servo drive tested...

€1,100.00

MDS-B-V2-0503 - Servo drive - MITSUBISHI

MDS-B-V2-0503

This MITSUBISHI axis drive, reference MDS-B-V2-0503 is a servo drive of the MELDAS M500 series. MITSUBISHI MDS-B-V2-0503 servo drive : 2 axis of 0.5kW and 0.3kW for servo motor HA23, HA33, HA40, HA43. This MDS-B-V2-0503 axis servo drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Servo drive tested on...

€1,050.00

MDS-B-V2-0505 - Servo drive - MITSUBISHI

MDS-B-V2-0505

This MITSUBISHI axis drive, reference MDS-B-V2-0505 is a servo drive of the MELDAS M500 series. MITSUBISHI MDS-B-V2-0505 servo drive : 2 axis of 0.5kW and 0.1kW for servo motor HA40 and HA43. This MDS-B-V2-0505 axis servo drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Servo drive tested on...

€1,785.00

TSXASY410 - Output Module - TELEMECANIQUE

TSXASY410

This analog output module TELEMECANIQUE is reference TSXASY410. It is part of the MODICON PREMIUM range This TELEMECANIQUE output module (4) is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Module reconditioned and tested on PLC bench (Test 100%).

€1,200.00

MDS-A-CV-110 - Power Supply Unit - MITSUBISHI

MDS-A-CV-110

This MITSUBISHI power supply, reference MDS-A-CV-110 is a power supply for the MELDAS 500 series. MITSUBISHI power supply MDS-A-CV-110 : 270 - 311V, 11kW, converter with built-in IPM. This MDS-A-CV-110 power supply is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Power supply tested on MITSUBISHI engine...

€1,975.00

MDS-A-CV-37 - Power Supply Unit - MITSUBISHI

MDS-A-CV-37

This MITSUBISHI power supply, reference MDS-A-CV-37 is a power supply for the MELDAS 500 series. MITSUBISHI power supply MDS-A-CV-37 : 270 - 311V, 3.7kW, converter with built-in IPM. This MDS-A-CV-37 power supply is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Power supply tested on MITSUBISHI engine test...

€1,460.00

MDS-A-CV-55 - Power Supply Unit - MITSUBISHI

MDS-A-CV-55

This MITSUBISHI power supply, reference MDS-A-CV-55 is a power supply for the MELDAS 500 series. MITSUBISHI power supply MDS-A-CV-55 : 270 - 311V, 5.5kW, converter with built-in IPM. This MDS-A-CV-55 power supply is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Power supply tested on MITSUBISHI engine test...

€1,460.00

MDS-A-CV-75 - Power Supply Unit - MITSUBISHI

MDS-A-CV-75

This MITSUBISHI power supply, reference MDS-A-CV-75 is a power supply for the MELDAS 500 series. MITSUBISHI power supply MDS-A-CV-75 : 270 - 311V, 7.5kW, converter with built-in IPM. This MDS-A-CV-75 power supply is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Power supply tested on MITSUBISHI engine test...

€1,580.00

MDS-A-CV-150 - Power Supply Unit - MITSUBISHI

MDS-A-CV-150

This MITSUBISHI power supply, reference MDS-A-CV-150 is a power supply for the MELDAS 500 series. MITSUBISHI power supply MDS-A-CV-150 : 270 - 311V, 15kW, converter with built-in IPM. This MDS-A-CV-150 power supply is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Power supply tested on MITSUBISHI engine...

€1,960.00