Catalog

Showing 1-36 of 37 item(s)

TSXP47455R - Interface Processor - TELEMECANIQUE

TSXP47455R

This TELEMECANIQUE and reference TSXP47455R processor card belongs to the Series 7 range. Module for TSX47-40 range Fipio / Fipway version 5.8 This Telemecanique TSXP47455R module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Refurbished and fully loaded power supply (time test) on TELEMECANIQUE bench.

€310.00

TSXRKD8FP - Rack - TELEMECANIQUE

TSXRKD8FP

This TELEMECANIQUE rack is reference TSXRKD8FP. It is part of the Series 7 range. UC rack (8 + 8) not venile. CPU Rack (8 + 8) no. fans. This TELEMECANIQUE rack is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Reconditioned rack and tested on automaton bench (Test 100%).

€495.00

TSXDST1682 - Output Module - TELEMECANIQUE

TSXDST1682

This TELEMECANIQUE digital output module is reference TSXDST1682. It is part of the TSX Series 7. 24 volts c.c. / static protected. 16 outputs. This TELEMECANIQUE output module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Module reconditioned and tested on a test bench (100% test).

€60.00

TSXP673 - Interface Processor - TELEMECANIQUE

TSXP673

This TELEMECANIQUE brand and TSXP673 reference processor card belongs to the TSX Series 7 range. Module for TSX67-30 Series Processor V: 2.30 This TELEMECANIQUE TSXP673 module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Module reconditioned and tested on a test bench (100% test).

€1,185.00

TSXP47420 - Interface Processor - TELEMECANIQUE

TSXP47420

This TELEMECANIQUE brand and TSXP47420 reference processor card belongs to the TSX Series 7 range. Module for TSX47-40 range version 4.3. Integrated unit link. 48k of internal RAM. 64k cartridge. This Télémécanique TSXP47420 module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€510.00

TSXSCM2116 - Communication Coupler - TELEMECANIQUE

TSXSCM2116

This TELEMECANIQUE communication module is reference TSXSCM2116. It is part of the TSX Series 7 series. Channel 0: Isolated RS232 C, Channel 1: UNI-TELWAY. This TELEMECANIQUE communication module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Module reconditioned and tested on a test bench (100% test).

€430.00

TSXMAPCPC742 - PC-Mapway board - TELEMECANIQUE

TSXMAPCPC742

This TELEMECANIQUE network coupler board is reference TSXMAPCPC742. It is part of the TSX Series 7 range. Used for the FTX 507 workstation. This TELEMECANIQUE network coupler module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Module reconditioned and tested on a test bench (100% test).

€1,065.00

TSXAXM162 - Axial command coupler - TELEMECANIQUE

TSXAXM162

This TELEMECANIQUE axial control coupler is reference TSXAXM162. It is part of the TSX Series 7 series. For MODICON TSX, analog, 3 inputs; 24VDC, 5 outputs. This TELEMECANIQUE axial command coupleur is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Module reconditioned and tested on a test bench (100% test).

€850.00

ACS800-01-0016-3 - Variable speed drive -ABB

ACS800-01-0016-3

This reference speed controller ACS800-01-0016-3 and ABB brand is a drive of the ACS800-01 range. ACS800-01-0016-3 : Three-phase power supply: 380, 400 or 415V. 25A, 11kW, This ABB variable speed drive is at your disposal to replace your defective equipment and has a suitable guarantee. Speed controller tested on ABB motor.

€960.00

ACS800-01-0011-3 - Variable speed drive -ABB

ACS800-01-0011-3

This reference speed controller ACS800-01-0011-3 and ABB brand is a drive of the ACS800-01 range. ACS800-01-0011-3 : Three-phase power supply: 380, 400 or 415V. 19A, 7.5kW, This ABB variable speed drive is at your disposal to replace your defective equipment and has a suitable guarantee. Speed controller tested on ABB motor.

€790.00

On sale!

V30W-0101000 - Security camera - SICK

V30W-0101000

This security camera from the V300 range and reference V30W-0101000 has a protective field range of up to 2m12. Response time: 20ms. Category 3. This V30W-0101000 camera from SICK is at your disposal to replace your defective equipment.

€1,550.00

BWU2702 - PROFIBUS safety module - BIHL+WIEDEMANN

BWU2702

This BIHL+WIEDEMANN brand BWU2702 gateway module is from the AS-i 3.0 PROFIBUS-Gateways range ASi-3 PROFIBUS gateway with integrated safety monitor, 2 ASi masters, 1 power supply for 2 ASi circuits, 4 discrete inputs, expandable to 62 2-channel safety inputs, 1922 2-channel safety inputs in max configuration, 4 circuits (2 x relay outputs and 2 x...

€805.00

BWU2822 - PROFIBUS safety module - BIHL+WIEDEMANN

BWU2822

This BIHL+WIEDEMANN brand BWU2822 gateway module is from the AS-i 3.0 PROFIBUS-Gateways range ASi-3 PROFIBUS gateway with integrated safety monitor, 2 ASi-3 masters, integrated decoupling, max. 4 A per ASi circuit, ASi current measurement in the gateway, 6 discrete inputs or 3 2-channel safety inputs (SIL 3, cat. 4), expandable to 62 2-channel safety...

€1,450.00

BWU2793 - PROFIBUS safety module - BIHL+WIEDEMANN

BWU2793

This BIHL+WIEDEMANN brand BWU2793 gateway module is from the AS-i 3.0 PROFIBUS-Gateways range ASi-3 PROFIBUS gateway with integrated safety monitor, 1 ASi-3 master, integrated decoupling, max. 4 A per ASi circuit, ASi current measurement in the gateway, 6 discrete inputs or 3 2-channel safety inputs (SIL 3, cat. 4), expandable to 31 2-channel safety...

€350.00

BWU2602 - PROFIBUS safety module - BIHL+WIEDEMANN

BWU2602

This BIHL+WIEDEMANN brand BWU2602 gateway module is from the AS-i 3.0 PROFIBUS-Gateways range ASi-3 PROFIBUS gateway with integrated safety monitor, 2 ASi masters, 1 power supply for 2 ASi circuits, 4 discrete inputs, expandable to 62 2-channel safety inputs, 1922 2-channel safety inputs in max configuration, 4 circuits (2 x relay outputs and 2 x...

€1,200.00

BWU2202 - PROFIBUS safety module - BIHL+WIEDEMANN

BWU2202

This BIHL+WIEDEMANN brand BWU2202 gateway module is from the AS-i 3.0 PROFIBUS-Gateways range ASi-3 PROFIBUS gateway with integrated safety monitor, 2 ASi masters, 1 power supply for 2 ASi circuits, 4 discrete inputs, expandable to 62 2-channel safety inputs, 4 enabling circuits (2 x relay outputs and 2 x signal outputs) safety outputs), expandable to 16...

€840.00

BWU2204 - PROFIBUS safety module - BIHL+WIEDEMANN

BWU2204

This BIHL+WIEDEMANN brand BWU2204 gateway module is from the AS-i 3.0 PROFIBUS-Gateways range ASi-3 PROFIBUS gateway with integrated safety monitor, 1 ASi master, 1 power supply for 2 ASi circuits, 4 discrete inputs, expandable to 62 2-channel safety inputs, 4 enabling circuits (2 x relay outputs and 2 x signal outputs) electronic safety devices),...

€650.00

BWU2206 - PROFIBUS safety module - BIHL+WIEDEMANN

BWU2206

This BIHL+WIEDEMANN brand BWU2206 gateway module is from the AS-i 3.0 PROFIBUS-Gateways range ASi-3 PROFIBUS gateway with integrated safety monitor, 1 ASi master, 1 power supply for 2 ASi circuits, expandable to 62 2-channel safety inputs, 2 enable circuits (2 x 2 relay outputs), expandable to 16 safety outputs , diagnostics and configuration via Ethernet...

€250.00

BWU3053 - PROFIBUS safety module - BIHL+WIEDEMANN

BWU3053

This BIHL+WIEDEMANN brand BWU3053 gateway module is from the AS-i 3.0 PROFIBUS-Gateways range 24 volt ASi-3 PROFIBUS gateway in stainless steel, 1 ASi-3 master, integrated decoupling, max. 4 A per ASi circuit, duplicate address detection, ASi fault check, IP20 This BIHL+WIEDEMANN brand BWU3053 module is at your disposal to replace your defective equipment.

€1,900.00

RTAC-01 - Encoder module -ABB

RTAC-01

This reference encoder module RTAC-01 and brand ABB is a module for drive of the ACS range. This ABB module is at your disposal to replace your defective equipment and has an appropriate guarantee. Module tested on ABB drive.

€550.00

ACS800-01-0020-3 - Variable speed drive -ABB

ACS800-01-0020-3

This reference speed controller ACS800-01-0020-3 and ABB brand is a drive of the ACS800-01 range. Characteristics: Three-phase power supply: 380, 400 or 415V. 23A, 11kW. This ABB variable speed drive is at your disposal to replace your defective equipment and has a suitable guarantee. Speed controller tested on ABB motor.

€1,260.00

ACS800-01-0003-3 - Variable speed drive -ABB

ACS800-01-0003-3

This reference speed controller ACS800-01-0003-3 and ABB brand is a drive of the ACS800-01 range. Characteristics: Three-phase power supply: 380, 400 or 415V. 3.4A, 1.1kW. This ABB variable speed drive is at your disposal to replace your defective equipment and has a suitable guarantee. Speed controller tested on ABB motor.

€420.00

ACS800-01-0004-3 - Variable speed drive -ABB

ACS800-01-0004-3

This reference speed controller ACS800-01-0004-3 and ABB brand is a drive of the ACS800-01 range. Characteristics: Three-phase power supply: 380, 400 or 415V. 4.3A, 1.5kW. This ABB variable speed drive is at your disposal to replace your defective equipment and has a suitable guarantee. Speed controller tested on ABB motor.

€560.00

ACS800-01-0005-3 - Variable speed drive -ABB

ACS800-01-0005-3

This reference speed controller ACS800-01-0005-3 and ABB brand is a drive of the ACS800-01 range. Characteristics: Three-phase power supply: 380, 400 or 415V. 5.7A, 2.2kW. This ABB variable speed drive is at your disposal to replace your defective equipment and has a suitable guarantee. Speed controller tested on ABB motor.

€840.00

ACS800-01-0006-3 - Variable speed drive -ABB

ACS800-01-0006-3

This reference speed controller ACS800-01-0006-3 and ABB brand is a drive of the ACS800-01 range. Characteristics: Three-phase power supply: 380, 400 or 415V. 7.5A, 3kW. This ABB variable speed drive is at your disposal to replace your defective equipment and has a suitable guarantee. Speed controller tested on ABB motor.

€1,540.00

ACS800-01-0009-3 - Variable speed drive -ABB

ACS800-01-0009-3

This reference speed controller ACS800-01-0009-3 and ABB brand is a drive of the ACS800-01 range. Characteristics: Three-phase power supply: 380, 400 or 415V. 9.3A, 4kW. This ABB variable speed drive is at your disposal to replace your defective equipment and has a suitable guarantee. Speed controller tested on ABB motor.

€440.00

ACS800-01-0025-3 - Variable speed drive -ABB

ACS800-01-0025-3

This reference speed controller ACS800-01-0025-3 and ABB brand is a drive of the ACS800-01 range. Characteristics: Three-phase power supply: 380, 400 or 415V. 32A, 15kW. This ABB variable speed drive is at your disposal to replace your defective equipment and has a suitable guarantee. Speed controller tested on ABB motor.

€980.00

ACS800-01-0030-3 - Variable speed drive -ABB

ACS800-01-0030-3

This reference speed controller ACS800-01-0030-3 and ABB brand is a drive of the ACS800-01 range. Characteristics: Three-phase power supply: 380, 400 or 415V. 37A; 18.5kW. This ABB variable speed drive is at your disposal to replace your defective equipment and has a suitable guarantee. Speed controller tested on ABB motor.

€2,280.00

ACS800-01-0040-3 - Variable speed drive -ABB

ACS800-01-0040-3

This reference speed controller ACS800-01-0040-3 and ABB brand is a drive of the ACS800-01 range. Characteristics: Three-phase power supply: 380, 400 or 415V. 49A; 22kW. This ABB variable speed drive is at your disposal to replace your defective equipment and has a suitable guarantee. Speed controller tested on ABB motor.

€3,645.00

ACS800-01-0050-3 - Variable speed drive -ABB

ACS800-01-0050-3

This reference speed controller ACS800-01-0050-3 and ABB brand is a drive of the ACS800-01 range. Characteristics: Three-phase power supply: 380, 400 or 415V. 60A; 30kW. This ABB variable speed drive is at your disposal to replace your defective equipment and has a suitable guarantee. Speed controller tested on ABB motor.

€2,200.00

ACS800-01-0060-3 - Variable speed drive -ABB

ACS800-01-0060-3

This reference speed controller ACS800-01-0060-3 and ABB brand is a drive of the ACS800-01 range. Characteristics: Three-phase power supply: 380, 400 or 415V. 69A; 37kW. This ABB variable speed drive is at your disposal to replace your defective equipment and has a suitable guarantee. Speed controller tested on ABB motor.

€4,700.00

ACS800-01-0075-3 - Variable speed drive -ABB

ACS800-01-0075-3

This reference speed controller ACS800-01-0075-3 and ABB brand is a drive of the ACS800-01 range. Characteristics: Three-phase power supply: 380, 400 or 415V. 100A; 45kW. This ABB variable speed drive is at your disposal to replace your defective equipment and has a suitable guarantee. Speed controller tested on ABB motor.

€4,200.00

ACS800-01-0100-3 - Variable speed drive -ABB

ACS800-01-0100-3

This reference speed controller ACS800-01-0100-3 and ABB brand is a drive of the ACS800-01 range. Characteristics: Three-phase power supply: 380, 400 or 415V. 115A; 55kW. This ABB variable speed drive is at your disposal to replace your defective equipment and has a suitable guarantee. Speed controller tested on ABB motor.

€4,000.00

ACS800-01-0120-3 - Variable speed drive -ABB

ACS800-01-0120-3

This reference speed controller ACS800-01-0120-3 and ABB brand is a drive of the ACS800-01 range. Characteristics: Three-phase power supply: 380, 400 or 415V. 141A; 75kW. This ABB variable speed drive is at your disposal to replace your defective equipment and has a suitable guarantee. Speed controller tested on ABB motor.

€5,600.00

ACS800-01-0135-3 - Variable speed drive -ABB

ACS800-01-0135-3

This reference speed controller ACS800-01-0135-3 and ABB brand is a drive of the ACS800-01 range. Characteristics: Three-phase power supply: 380, 400 or 415V. 163A; 90kW. This ABB variable speed drive is at your disposal to replace your defective equipment and has a suitable guarantee. Speed controller tested on ABB motor.

€8,300.00

ACS800-01-0165-3 - Variable speed drive -ABB

ACS800-01-0165-3

This reference speed controller ACS800-01-0165-3 and ABB brand is a drive of the ACS800-01 range. Characteristics: Three-phase power supply: 380, 400 or 415V. 215A; 110kW. This ABB variable speed drive is at your disposal to replace your defective equipment and has a suitable guarantee. Speed controller tested on ABB motor.

€5,800.00