Catalog

Showing 1-36 of 75 item(s)

73-552-0005 - Power Supply - ASTEC

73-552-0005

This 73-552-0005 and ASTEC brand power supply module belongs to the MP range. Astec and Artesyn AC DC and DC DC Products. MP Series - Up to 1200 Watts. 73-552-0005 : Input : 380V. Output : 360W, 5V This Astec 73-551-0005 module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€460.00

73-551-0005 - Power Supply - ASTEC

73-551-0005

This 73-551-0005 and ASTEC brand power supply module belongs to the MP4 range. Astec and Artesyn AC DC and DC DC Products. MP Series - Up to 1200 Watts. MP4-1E-4LL-4QE-NNE-00 : 380V input. Output: 5V, 210W This Astec 73-551-0005 module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€330.00

73-554-0330 - Power Supply - ASTEC

73-554-0330

This ASTEC / ARTESYN power supply module 73-554-0330 belongs to the MP4 Module range. Standard 144W MP power supply with 12 ohm precharge resistor. (4NN, V1 et V2 = 15V) (4LL, V1 et V2 = 12V) This ASTEC 73-554-0330 power supply module, tested under full load, is at your disposal to replace your defective module.

€520.00

On sale!

S30A-4011CA - Laser Scanner - SICK

S30A-4011CA

This S3000 series laser scanner has four protection fields and four servo fields that are freely programmable using your SICK software. You can therefore configure your laser scanner according to the conditions of your installation. This SICK S30A-4011CA scanner is at your disposal to replace your defective equipment.

€2,585.00

73-540-0446 - Power Supply - ASTEC

73-540-0446

This power supply 73-540-0446 and ASTEC brand belongs to the MP4 range. Astec and Artesyn AC DC and DC DC Products. MP Series - Up to 1200 Watts. MP4-2D-1C-LLE-01 : 400W-600W, 5 Slots. This Astec 73-540-0446 power supply is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€310.00

S30A-4011BA - Laser Scanner - SICK

S30A-4011BA

This S3000 Series safety laser scanner features 1 protective field set and four servo fields that are freely programmable using your SICK software. You can therefore configure your laser scanner according to the conditions of your installation. Protective Field range : 4 meters This SICK S30A-4011BA scanner is at your disposal to replace your defective...

€2,220.00

S30A-7011CA - Laser Scanner - SICK

S30A-7011CA

This S3000 series safety laser scanner features 4 protective field sets and 12 control fields that are freely programmable using your SICK software. You can therefore configure your laser scanner according to the conditions of your installation. Protective Field range : 7 m. This SICK S30A-7011CA scanner is at your disposal to replace your defective...

€715.00

EVG EPS 60 7200W - Power Supply - HONLE UV TECHNOLOGY

EVG EPS 60 7200W

This HONLE UV TECHNOLOGY branded power supply and EVG EPS 60 reference belongs to the EPS 60 range. Maximum power output: 7.2 kW - Hands supply: 400 V - 480 V, 50/60 Hz This HONLE UV TECHNOLOGY EVG EPS 60 power supply is at your disposal to replace your defective equipment and has a warranty adapted to your needs.

€2,820.00

S30A-6011EA - Laser Scanner - SICK

S30A-6011EA

This safety laser scanner can only be used in combination with the EFI system group, eg. with a Flexi Soft safety control system or another S300 or S3000 safety laser scanner. Range: 5.5 m This SICK S30A-6011EA scanner is at your disposal to replace your defective equipment.

€2,560.00

S30A-7011EA - Laser Scanner - SICK

S30A-7011EA

This S3000 Series safety laser scanner features 1 protective field set and 64 servo fields that are freely programmable using your SICK software. You can therefore configure your laser scanner according to the conditions of your installation. Protective Field range : 7 meters This SICK S30A-7011EA scanner is at your disposal to replace your defective...

€890.00

73-550-0332 - Power Supply - ASTEC

73-550-0332

This power supply 73-550-0332 and ASTEC brand belongs to the MP4 range. Astec and Artesyn AC DC and DC DC Products. MP Series - Up to 1200 Watts. MP4-1E-4LL-4QE-NNE-00 : Input : 380V, 0,3A (NNE : 15V 1A/15V 1A/5V 2A) This Astec 73-550-0332 power supply is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€350.00

EVG EPS 60 2000W - Power Supply - HONLE UV TECHNOLOGY

EVG EPS 60 2000W

This HONLE UV TECHNOLOGY branded power supply and EVG EPS 60 reference belongs to the EPS 60 range. Maximum power output: 2.0 kW - Hands supply: 400 V - 480 V, 50/60 Hz This HONLE UV TECHNOLOGY EVG EPS 60 power supply is at your disposal to replace your defective equipment and has a warranty adapted to your needs.

€1,300.00

EVG EPS 60 4200W - Power Supply - HONLE UV TECHNOLOGY

EVG EPS 60 4200W

This HONLE UV TECHNOLOGY branded power supply and EVG EPS 60 reference belongs to the EPS 60 range. Maximum power output: 4.2 kW - Hands supply: 400 V - 480 V, 50/60 Hz This HONLE UV TECHNOLOGY EVG EPS 60 power supply is at your disposal to replace your defective equipment and has a warranty adapted to your needs.

€3,290.00

EVG EPS 60 5000W - Power Supply - HONLE UV TECHNOLOGY

EVG EPS 60 5000W

This HONLE UV TECHNOLOGY branded power supply and EVG EPS 60 reference belongs to the EPS 60 range. Maximum power output: 5.0 kW - Hands supply: 400 V - 480 V, 50/60 Hz This HONLE UV TECHNOLOGY EVG EPS 60 power supply is at your disposal to replace your defective equipment and has a warranty adapted to your needs.

€2,995.00

EVG EPS 60 5800W - Power Supply - HONLE UV TECHNOLOGY

EVG EPS 60 5800W

This HONLE UV TECHNOLOGY branded power supply and EVG EPS 60 reference belongs to the EPS 60 range. Maximum power output: 5.8 kW - Hands supply: 400 V - 480 V, 50/60 Hz This HONLE UV TECHNOLOGY EVG EPS 60 power supply is at your disposal to replace your defective equipment and has a warranty adapted to your needs.

€1,750.00

EVG EPS 60 6000W - Power Supply - HONLE UV TECHNOLOGY

EVG EPS 60 6000W

This HONLE UV TECHNOLOGY branded power supply and EVG EPS 60 reference belongs to the EPS 60 range. Maximum power output: 6.0 kW - Hands supply: 400 V - 480 V, 50/60 Hz This HONLE UV TECHNOLOGY EVG EPS 60 power supply is at your disposal to replace your defective equipment and has a warranty adapted to your needs.

€2,200.00

FX3-CPU000000 - Security module - SICK

FX3-CPU000000

This FX3-CPU000000 main module from the Flexi Soft range is configurable by software (Flexi Soft Designer). 24Vdc, category 4. Main module sold without system connector (FX3-MPL000001) This FX3-CPU000000 module from SICK is at your disposal to replace your defective hardware.

€499.00

FX3-MPL000001 - Connector for security module - SICK

FX3-MPL000001

This connector for main module FX3-MPL000001 from the Flexi Soft range is for FX3-CPU0 or FX3-CPU1 modules. System connector: Flexi-Soft system power supply and save system configuration (without EFI-enabled devices). screw terminal blocks This FX3-MPL000001 connector from SICK is at your disposal to replace your defective equipment.

€125.00

FX3-XTDI80002 - I/O module - SICK

FX3-XTDI80002

This FX3-XTDI80002 input/output module from the Flexi Soft range is configurable by software (Flexi Soft Designer). 8 inputs and 8 outputs. Category 4 This FX3-XTDI80002 module from SICK is at your disposal to replace your defective hardware.

€155.00

On sale!

V30W-0101000 - Security camera - SICK

V30W-0101000

This security camera from the V300 range and reference V30W-0101000 has a protective field range of up to 2m12. Response time: 20ms. Category 3. This V30W-0101000 camera from SICK is at your disposal to replace your defective equipment.

€1,550.00

On sale!

CLV621-0120 - Barcode reader - SICK

CLV621-0120

This barcode reader from the CLV62X range and reference CLV621-0120 has a reading range of 60 to 730mm. 10V...30V, Ethernet connection This SICK brand CLV621-0120 reader is at your disposal to replace your defective equipment.

€1,950.00

WT18-3P430 - Photoelectric Sensor - SICK

WT18-3P430

This WT18-3P430 Photoelectric Sensor from the W18-3 range has an LED emission source. 10Vdc...30Vdc, 4-turn potentiometer. PNP switching output This SICK brand Photoelectric Sensor WT18-3P430 is at your disposal to replace your defective equipment.

€330.00

WEU 26/2-130 - safety switches - SICK

WEU 26/2-130

This WEU 26/2-130 safety light curtain is from the WSU/WEU26-3 range. 24Vdc, sweep page: 70m This WEU 26/2-130 barrier from SICK is at your disposal to replace your defective equipment.

€265.00

FX0-GCAN00000 - Security module - SICK

FX0-GCAN00000

This FX0-GCAN00000 main module from the Flexi Soft range is configurable by software (Flexi Soft Designer). CANOPEN fieldbus, powered by Flexibus+ This FX0-GCAN00000 module from SICK is at your disposal to replace your defective equipment.

€980.00

FX0-GENT00000 - Security module - SICK

FX0-GENT00000

This FX0-GENT00000 main module from the Flexi Soft range is configurable by software (Flexi Soft Designer). ETHERNET fieldbus, powered by Flexibus+ This FX0-GENT00000 module from SICK is at your disposal to replace your defective equipment.

€1,175.00

FX3-XTIO84002 - I/O module - SICK

FX3-XTIO84002

This FX3-XTIO84002 input/output module from the Flexi Soft range is configurable by software (Flexi Soft Designer). 8 inputs and 6 outputs. Category 4 This FX3-XTIO84002 module from SICK is at your disposal to replace your defective hardware.

€495.00

SDS 4021 - Servo Converter - STÖBER

SDS 4021

This variable speed drive for servo motor reference SDS 4021 and brand Stöber is a variable speed drive from the POSIDYN SDS 4000 range. SDS 4021: Three-phase 230...480V, 2A, 1kVA. This Stöber drive is available to replace your defective equipment and has an appropriate warranty. Drive tested on an engine test bench.

€1,725.00

SDS 4011 - Servo Converter - STÖBER

SDS 4011

This variable speed drive for servo motor reference SDS 4011 and brand Stöber is a variable speed drive from the POSIDYN SDS 4000 range. SDS 4011: Three-phase 230...480V, 1.5A, 1kVA. This Stöber drive is available to replace your defective equipment and has an appropriate warranty. Drive tested on an engine test bench.

€550.00

SDS 4041 - Servo Converter - STÖBER

SDS 4041

This variable speed drive for servo motor reference SDS 4041 and brand Stöber is a variable speed drive from the POSIDYN SDS 4000 range. SDS 4041: Three-phase 230...480V, 6A, 4kVA. This Stöber drive is available to replace your defective equipment and has an appropriate warranty. Drive tested on an engine test bench.

€2,310.00

SDS 4071 - Servo Converter - STÖBER

SDS 4071

This variable speed drive for servo motor reference SDS 4071 and brand Stöber is a variable speed drive from the POSIDYN SDS 4000 range. SDS 4071: Three-phase 230...480V, 10A, 7kVA. This Stöber drive is available to replace your defective equipment and has an appropriate warranty. Drive tested on an engine test bench.

€6,180.00

SDS 4101 - Servo Converter - STÖBER

SDS 4101

This variable speed drive for servo motor reference SDS 4101 and brand Stöber is a variable speed drive from the POSIDYN SDS 4000 range. SDS 4101: Three-phase 230...480V, 14A, 10kVA. This Stöber drive is available to replace your defective equipment and has an appropriate warranty. Drive tested on an engine test bench.

€3,980.00

SDS 4141 - Servo Converter - STÖBER

SDS 4141

This variable speed drive for servo motor reference SDS 4141 and brand Stöber is a variable speed drive from the POSIDYN SDS 4000 range. SDS 4141: Three-phase 230...480V, 20A, 14kVA. This Stöber drive is available to replace your defective equipment and has an appropriate warranty. Drive tested on an engine test bench.

€4,830.00

FBS 4008/B - Servo Converter - STÖBER

FBS 4008/B

This servo motor reference FBS 4008/B and Stöber brand is a drive from the POSIDRIVE FDS 4000 range. FBS 4008/B: N+1x230V, 0.37kW, 2.1A. This Stöber servo drive is at your disposal to replace your defective equipment and has an appropriate guarantee. Drive tested on an engine test bench.

€840.00

FBS 4013/B - Servo Converter - STÖBER

FBS 4013/B

This servo motor reference FBS 4013/B and Stöber brand is a drive from the POSIDRIVE FDS 4000 range. FBS 4013/B: N+1x230V, 0.75kW, 3.5A. This Stöber servo drive is at your disposal to replace your defective equipment and has an appropriate guarantee. Drive tested on an engine test bench.

€1,980.00

FDS 4014/B - Servo Converter - STÖBER

FDS 4014/B

This servo motor reference FDS 4014/B and Stöber brand is a drive from the POSIDRIVE FDS 4000 range. FDS 4014/B: 3x400V, 0.75kW, 2.1A. This Stöber servo drive is at your disposal to replace your defective equipment and has an appropriate guarantee. Drive tested on an engine test bench.

€1,775.00

FDS 4024/B - Servo Converter - STÖBER

FDS 4024/B

This servo motor reference FDS 4024/B and Stöber brand is a drive from the POSIDRIVE FDS 4000 range. FDS 4024/B: 3x400V, 1.5kW, 3.5A. This Stöber servo drive is at your disposal to replace your defective equipment and has an appropriate guarantee. Drive tested on an engine test bench.

€1,230.00