Catalog

Showing 37-72 of 100 item(s)

UNI 1404 - Synchron Controller - CONTROL TECHNIQUES

UNI 1404

This reference CONTROL TECHNIQUES speed controller UNI 1404 is a drive for asynchronous and synchronous motor. Inverter 2.2 kW, 5.6 A, 380-480V This UNI 1404 speed controller is at your disposal to replace defective equipment and has a guarantee adapted to your needs. Speed controller reconditioned and tested in full load (test of duration) on CONTROL...

€1,200.00

UNI 1405 - Synchron Controller - CONTROL TECHNIQUES

UNI 1405

This reference CONTROL TECHNIQUES speed controller UNI 1405 is a drive for asynchronous and synchronous motor. Inverter 4 kW, 9.5 A, 380-480V This UNI 1405 speed controller is at your disposal to replace defective equipment and has a guarantee adapted to your needs. Speed controller reconditioned and tested in full load (test of duration) on CONTROL...

€1,390.00

UNI 4401 - Synchron Controller - CONTROL TECHNIQUES

UNI 4401

This reference CONTROL TECHNIQUES speed controller UNI 4401 is a drive for asynchronous and synchronous motor. Inverter 45 kW, 96A, 380-480V This UNI 4401 speed controller is at your disposal to replace defective equipment and has a guarantee adapted to your needs. Speed controller reconditioned and tested in full load (test of duration) on CONTROL...

€3,990.00

UNI 4402 - Synchron Controller - CONTROL TECHNIQUES

UNI 4402

This reference CONTROL TECHNIQUES speed controller UNI 4402 is a drive for asynchronous and synchronous motor. Inverter 55 kW, 124A, 380-480V This UNI 4402 speed controller is at your disposal to replace defective equipment and has a guarantee adapted to your needs. Speed controller reconditioned and tested in full load (test of duration) on CONTROL...

€3,480.00

UNI 4403 - Synchron Controller - CONTROL TECHNIQUES

UNI 4403

€7,280.00

UNI 4404 - Synchron Controller - CONTROL TECHNIQUES

UNI 4404

This reference CONTROL TECHNIQUES speed controller UNI 4404 is a drive for asynchronous and synchronous motor. Inverter 90 kW, 180A, 380-480V This UNI 4404 speed controller is at your disposal to replace defective equipment and has a guarantee adapted to your needs. Speed controller reconditioned and tested in full load (test of duration) on CONTROL...

€7,480.00

UNI 4405 - Synchron Controller - CONTROL TECHNIQUES

UNI 4405

This reference CONTROL TECHNIQUES speed controller UNI 4405 is a drive for asynchronous and synchronous motor. Inverter 110 kW, 202A, 380-480V This UNI 4405 speed controller is at your disposal to replace defective equipment and has a guarantee adapted to your needs. Speed controller reconditioned and tested in full load (test of duration) on CONTROL...

€7,890.00

A06B-6093-H113 - Servo Amplifier - FANUC

A06B-6093-H113

This FANUC servo amplifier unit is reference A06B-6093-H113. Servo Amplifier SVU1-40 module with fiber optic interface. BETA range. Servo amplifier module : Input: 220-240V ~ (1PH) / 200-240V ~ (3PH) 15A (1PH) / 9.4A (3PH). Maximum output voltage: 240V ~. Rated output current: 12.5A FANUC servo amplifier unit reconditioned and tested on bench manufacturer...

€1,450.00

UD71 - Communications interface module - CONTROL TECHNIQUES

UD71

This CONTROL TECHNIQUES communication interface module UD71 is a module for the UNIDRIVE range. The UD71 provides the ability to read and write values in the UNIDRIVE drive parameters and can act as a slave module. This CONTROL TECHNIQUES interface module is at your disposal to replace your defective equipment and has a warranty.

€410.00

UMV 4301 8T - Synchron Controller - LEROY SOMER

UMV 4301 8T

This reference LEROY SOMER speed controller UMV 4301 8T is a drive for asynchronous and synchronous motor. Inverter 5,5 kW, 12 A, 380-480V This UMV 4301 8T speed controller is at your disposal to replace defective equipment and has a guarantee adapted to your needs. Speed controller reconditioned and tested in full load (test of duration) on LEROY SOMER...

€1,015.00

UMV 4301 11T - Synchron Controller - LEROY SOMER

UMV 4301 11T

This reference LEROY SOMER speed controller UMV 4301 11T is a drive for asynchronous and synchronous motor. Inverter 7,5 kW, 16 A, 380-480V This UMV 4301 11T speed controller is at your disposal to replace defective equipment and has a guarantee adapted to your needs. Speed controller reconditioned and tested in full load (test of duration) on LEROY...

€1,470.00

UMV 4301 16T - Synchron Controller - LEROY SOMER

UMV 4301 16T

This reference LEROY SOMER speed controller UMV 4301 16T is a drive for asynchronous and synchronous motor. Inverter 11 kW, 25 A, 380-480V This UMV 4301 16T speed controller is at your disposal to replace defective equipment and has a guarantee adapted to your needs. Speed controller reconditioned and tested in full load (test of duration) on LEROY...

€1,685.00

A06B-6093-H101 - Servo Amplifier - FANUC

A06B-6093-H101

This FANUC servo amplifier unit is reference A06B-6093-H101. Servo Amplifier SVU1-12 module with fiber optic interface. BETA range. Servo amplifier module Type B : Input: 220-240V ~ (1PH) / 200-240V ~ (3PH) 5.1A (1PH) / 2.3A (3PH). Maximum output voltage: 240V ~. Rated output current: 3.2A FANUC servo amplifier module reconditioned and tested on bench...

€640.00

A06B-6093-H102 - Servo Amplifier - FANUC

A06B-6093-H102

This FANUC servo amplifier unit is reference A06B-6093-H102. Servo Amplifier SVU1-12 module with fiber optic interface. BETA range. Servo amplifier module Type B : Input: 220-240V ~ (1PH) / 200-240V ~ (3PH) 10.1A (1PH) / 6.3A (3PH). Maximum output voltage: 240V ~. Rated output current: 5.9A FANUC servo amplifier module reconditioned and tested on bench...

€950.00

A06B-6093-H103 - Servo Amplifier - FANUC

A06B-6093-H103

This FANUC servo amplifier unit is reference A06B-6093-H103. Servo Amplifier SVU1-40 module with PWM. Type B. BETA range. Servo amplifier module : Input: 220-240V ~ (1PH) / 200-240V ~ (3PH) 15A (1PH) / 9.4A (3PH). Maximum output voltage: 240V ~. Rated output current: 12.5A FANUC servo amplifier unit reconditioned and tested on bench manufacturer (Test 100%).

€1,780.00

A06B-6093-H104 - Servo Amplifier - FANUC

A06B-6093-H104

This FANUC servo amplifier unit is reference A06B-6093-H104. Servo Amplifier SVU1-80 module with PWM. Type B. BETA range. Servo amplifier module : Input: 220-240V ~ (1PH) / 200-240V ~ (3PH) 27A (1PH) / 17A (3PH). Maximum output voltage: 240V ~. Rated output current: 15.0A FANUC servo amplifier unit reconditioned and tested on bench manufacturer (Test 100%).

€1,600.00

A06B-6093-H111 - Servo Amplifier - FANUC

A06B-6093-H111

This FANUC servo amplifier unit is reference A06B-6093-H111. Servo Amplifier SVU1-12 module with fiber optic interface. BETA range. Servo amplifier module (Fiber optic) : Input: 220-240V ~ (1PH) / 200-240V ~ (3PH) 5.1A (1PH) / 3.2A (3PH). Maximum output voltage: 240V ~. Rated output current: 3.2A FANUC servo amplifier module reconditioned and tested on...

€710.00

JUSP-ACP05JAA + JUSP-ACPCB05JAA - Converter - YASKAWA

JUSP-ACP05JAA + JUSP-ACPCB05JAA

This YASKAWA converter is composed of 2 modules: JUSP-ACP05JAA + JUSP-ACPCB05JAA. It is used in CACR-SV3AAA servopacks, CACR-UP6AAC, CACR-SK16AAC, CACR-UP20AAA. Capacity of 5A. This YASKAWA converter is at your disposal to replace your defective equipment. It is sold with a guarantee of operation adapted to your needs.

€920.00

MR-C10A - Servo Amplifier - MITSUBISHI

MR-C10A

This MITSUBISHI drive, reference MR-C10A is an AC Servo drive. It belongs to the MELSERVO-C Series range. Mitsubishi AC 1 phase 200/240V, 0.85A dimmer for HC-PQ033, HC-PQ13 and HC-PQ053 servo motors This MR-C10A drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€310.00

MR-C20A - Servo Amplifier - MITSUBISHI

MR-C20A

This MITSUBISHI drive, reference MR-C20A is an AC Servo drive. It belongs to the MELSERVO-C Series range. Mitsubishi AC 1 phase 200/240V, 1.5A dimmer for HC-PQ23 servo motors This MR-C20A drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€540.00

MR-C40A - Servo Amplifier - MITSUBISHI

MR-C40A

This MITSUBISHI drive, reference MR-C40A is an AC Servo drive. It belongs to the MELSERVO-C Series range. Mitsubishi AC 1 phase 200/240V, 2.8A dimmer for HC-PQ43 servo motors This MR-C40A drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€570.00

SI-PROFIBUS - Interface module - CONTROL TECHNIQUES

SI-PROFIBUS

This SI-PROFIBUS interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with M200, M300, M400, M600, M700 drives This SI-PROFIBUS Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,250.00

SM-Applications Plus - Interface module - CONTROL TECHNIQUES

SM-Applications Plus

This SM-Applications Plus interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-Applications Plus Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€165.00

SM-CANopen - Interface module - CONTROL TECHNIQUES

SM-CANopen

This SM-CANopen interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-CANopen Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€3,926.00

SM-DEVICENET - Interface module - CONTROL TECHNIQUES

SM-DEVICENET

This SM-DEVICENET interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-DEVICENET Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€130.00

SM-ETHERNET - Interface module - CONTROL TECHNIQUES

SM-ETHERNET

This SM-ETHERNET interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-ETHERNET Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€420.00

SM-EZMOTION - Interface module - CONTROL TECHNIQUES

SM-EZMOTION

This SM-EZMOTION interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Mentor MP drives. This SM-EZMOTION Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€420.00

SM-I/O plus - Interface module - CONTROL TECHNIQUES

SM-I/O plus

This SM-I/O plus interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-I/O plus Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€195.00

SM-Resolver - Interface module - CONTROL TECHNIQUES

SM-Resolver

This SM-Resolver interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-Resolver Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€450.00

SM-PROFIBUS DP - Interface module - CONTROL TECHNIQUES

SM-PROFIBUS DP

This SM-PROFIBUS DP interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-PROFIBUS DP Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€145.00

SM-Universal - Interface module - CONTROL TECHNIQUES

SM-Universal Encoder Plus - Interface module - CONTROL TECHNIQUES

SM-Universal Encoder Plus

This SM-Universal Encoder Plus interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-Universal Encoder Plus Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to...

€140.00

UD50 - option module - CONTROL TECHNIQUES

UD50

This CONTROL TECHNIQUES option module reference UD50 is an I/O module interface for the UNIDRIVE range. The small optional UD50 module is an interface module to be installed in a Unidrive. This UD50 option module is at your disposal in supply or in standard exchange to replace your defective equipment and has a guarantee

€389.00

UD501 - option module - CONTROL TECHNIQUES

UD51 - option module - CONTROL TECHNIQUES

UD51

This CONTROL TECHNIQUES option module reference UD51 is a encoder module interface for the UNIDRIVE range. The small optional UD51 module is an interface module to be installed in a Unidrive. This UD51 option module is at your disposal in supply or in standard exchange to replace your defective equipment and has a guarantee

€195.00

UD70 - Option module - CONTROL TECHNIQUES

UD70

This CONTROL TECHNIQUES option module reference UD70 is a module for the UNIDRIVE range The UD70 is a compact microcomputer contained in a large option module for easy installation in any size Unidrive. This CONTROL TECHNIQUES interface module is available as a supply to replace your defective equipment and has a guarantee

€590.00

SM-Applications - Interface module - CONTROL TECHNIQUES

SM-Applications

This SM-Applications interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-Applications Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€120.00

SM-PROFIBUS DP-V1 - Interface module - CONTROL TECHNIQUES

SM-PROFIBUS DP-V1

This SM-PROFIBUS DP-V1 interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-PROFIBUS DP-V1 Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€145.00