Catalog

Showing 37-72 of 102 item(s)

UNI 4401 - Synchron Controller - CONTROL TECHNIQUES

UNI 4401

This reference CONTROL TECHNIQUES speed controller UNI 4401 is a drive for asynchronous and synchronous motor. Inverter 45 kW, 96A, 380-480V This UNI 4401 speed controller is at your disposal to replace defective equipment and has a guarantee adapted to your needs. Speed controller reconditioned and tested in full load (test of duration) on CONTROL...

€3,990.00

UNI 4402 - Synchron Controller - CONTROL TECHNIQUES

UNI 4402

This reference CONTROL TECHNIQUES speed controller UNI 4402 is a drive for asynchronous and synchronous motor. Inverter 55 kW, 124A, 380-480V This UNI 4402 speed controller is at your disposal to replace defective equipment and has a guarantee adapted to your needs. Speed controller reconditioned and tested in full load (test of duration) on CONTROL...

€3,480.00

UNI 4403 - Synchron Controller - CONTROL TECHNIQUES

UNI 4403

€7,280.00

UNI 4404 - Synchron Controller - CONTROL TECHNIQUES

UNI 4404

This reference CONTROL TECHNIQUES speed controller UNI 4404 is a drive for asynchronous and synchronous motor. Inverter 90 kW, 180A, 380-480V This UNI 4404 speed controller is at your disposal to replace defective equipment and has a guarantee adapted to your needs. Speed controller reconditioned and tested in full load (test of duration) on CONTROL...

€7,480.00

UNI 4405 - Synchron Controller - CONTROL TECHNIQUES

UNI 4405

This reference CONTROL TECHNIQUES speed controller UNI 4405 is a drive for asynchronous and synchronous motor. Inverter 110 kW, 202A, 380-480V This UNI 4405 speed controller is at your disposal to replace defective equipment and has a guarantee adapted to your needs. Speed controller reconditioned and tested in full load (test of duration) on CONTROL...

€7,890.00

UD71 - Communications interface module - CONTROL TECHNIQUES

UD71

This CONTROL TECHNIQUES communication interface module UD71 is a module for the UNIDRIVE range. The UD71 provides the ability to read and write values in the UNIDRIVE drive parameters and can act as a slave module. This CONTROL TECHNIQUES interface module is at your disposal to replace your defective equipment and has a warranty.

€410.00

UMV 4301 8T - Synchron Controller - LEROY SOMER

UMV 4301 8T

This reference LEROY SOMER speed controller UMV 4301 8T is a drive for asynchronous and synchronous motor. Inverter 5,5 kW, 12 A, 380-480V This UMV 4301 8T speed controller is at your disposal to replace defective equipment and has a guarantee adapted to your needs. Speed controller reconditioned and tested in full load (test of duration) on LEROY SOMER...

€1,015.00

UMV 4301 11T - Synchron Controller - LEROY SOMER

UMV 4301 11T

This reference LEROY SOMER speed controller UMV 4301 11T is a drive for asynchronous and synchronous motor. Inverter 7,5 kW, 16 A, 380-480V This UMV 4301 11T speed controller is at your disposal to replace defective equipment and has a guarantee adapted to your needs. Speed controller reconditioned and tested in full load (test of duration) on LEROY...

€1,470.00

UMV 4301 16T - Synchron Controller - LEROY SOMER

UMV 4301 16T

This reference LEROY SOMER speed controller UMV 4301 16T is a drive for asynchronous and synchronous motor. Inverter 11 kW, 25 A, 380-480V This UMV 4301 16T speed controller is at your disposal to replace defective equipment and has a guarantee adapted to your needs. Speed controller reconditioned and tested in full load (test of duration) on LEROY...

€1,685.00

ATV66U72N4 - Speed Drive - TELEMECANIQUE

ATV66U72N4

This ATV66U72N4 and SCHNEIDER/TELEMECANIQUE reference speed controller is a variable speed drive for asynchronous motors. Cutoff frequency at 10 kHz : 6.5 kVA, 4kW, 16A Cutoff frequency at 4 kHz : 7.2 kVA, 4kW, 15A This ALTIVAR (Schneider Electric) is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€950.00

ATV66U41M2 - Speed Drive - TELEMECANIQUE

ATV66U41M2

This ATV66U72N4 and SCHNEIDER/TELEMECANIQUE reference speed controller is a variable speed drive for asynchronous motors. Variable switching frequency at 4 kHz: 6 kVA, 3kW, 19.1A Constant switching frequency at 4 kHz: 4.2 kVA, 2.2kW, 14.7A This ALTIVAR (Schneider Electric) is at your disposal to replace your defective equipment and has a guarantee adapted...

€1,300.00

ATV66D12N4 - Speed Drive - TELEMECANIQUE

ATV66D12N4

This ATV66U90N4 and SCHNEIDER/TELEMECANIQUE reference speed controller is a variable speed drive for asynchronous motors. Cutoff frequency at 10 kHz: 11 kVA, 7.5 kW, 25A Switching frequency at 4 kHz: 12 kVA, 7.5 kW, 26A This ALTIVAR (Schneider Electric) is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,290.00

ATV66U72M2 - Speed Drive - TELEMECANIQUE

ATV66U72M2

This ATV66U72M2 and SCHNEIDER/TELEMECANIQUE reference speed controller is a variable speed drive for asynchronous motors. Constant switching frequency at 4kHz: 6.6kVA, 4kW, 24.2A Variable switching frequency at 4kHz: 8.7 kVA, 5.5kW, 32A This ALTIVAR (Schneider Electric) is at your disposal to replace your defective equipment and has a guarantee adapted to...

€2,800.00

ATV66U90M2 - Speed Drive - TELEMECANIQUE

ATV66U90M2

This ATV66U90M2 and SCHNEIDER/TELEMECANIQUE reference speed controller is a variable speed drive for asynchronous motors. Constant switching frequency at 4kHz: 9.6kVA, 5.5kW, 32A Variable switching frequency at 4kHz: 11.1kVA, 7.5kW, 41A This ALTIVAR (Schneider Electric) is at your disposal to replace your defective equipment and has a guarantee adapted to...

€590.00

ATV66D16N4 - Speed Drive - TELEMECANIQUE

ATV66D16N4

This ATV66D16N4 and SCHNEIDER/TELEMECANIQUE reference speed controller is a variable speed drive for asynchronous motors. Cutoff frequency at 4kHz: 16kVA, 11kW, 35A Cutoff frequency at 10kHz: 15 kVA, 11kW, 35A This ALTIVAR (Schneider Electric) is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€9,100.00

ATV66D23N4 - Speed Drive - TELEMECANIQUE

ATV66D23N4

This ATV66D23N4 and SCHNEIDER/TELEMECANIQUE reference speed controller is a variable speed drive for asynchronous motors. Cutoff frequency at 4kHz: 23 kVA, 15kW, 45A Cutoff frequency at 10kHz: 20 kVA, 15kW, 45A This ALTIVAR (Schneider Electric) is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,320.00

ATV66D33N4 - Speed Drive - TELEMECANIQUE

ATV66D33N4

This ATV66D33N4 and SCHNEIDER/TELEMECANIQUE reference speed controller is a variable speed drive for asynchronous motors. Cutoff frequency at 4kHz: 33 kVA, 22kW, 60A Cutoff frequency at 10kHz: 30 kVA, 22kW, 60A This ALTIVAR (Schneider Electric) is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€2,350.00

ATV66D46N4 - Speed Drive - TELEMECANIQUE

ATV66D46N4

ThisATV66D46N4 and SCHNEIDER/TELEMECANIQUE reference speed controller is a variable speed drive for asynchronous motors. Cutoff frequency at 4kHz: 46 kVA, 30kW, 78A Cutoff frequency at 10kHz: 41 kVA, 30kW, 78A This ALTIVAR (Schneider Electric) is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€4,650.00

ATV66D64N4 - Speed Drive - TELEMECANIQUE

ATV66D64N4

This ATV66D64N4 and SCHNEIDER/TELEMECANIQUE reference speed controller is a variable speed drive for asynchronous motors. Cutoff frequency at 2 kHz: 64 kVA, 45kW, 110A Switching frequency at 4 kHz: 58 kVA, 45kW, 112A This ALTIVAR (Schneider Electric) is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€2,600.00

6AV6642-0DA01-1AX0 - Operator Panel - SIEMENS

6AV6642-0DA01-1AX0

Operator Panel SIEMENS reference 6AV6642-0DA01-1AX0 for SIMATIC. OP177B SIMATIC PUPITRE OP177B PN / DP STN 256 COLOR TOUCH AND KEYS PROTOCOL MPI / PROFIBUS DP RS485 / RS422 / USB INTERFACE ETHERNET 10/100 PRINTER INTERFACE This OP SIEMENS 6AV6642-0DA01-1AX0 is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,285.00

6AV6642-0DC01-1AX0 - Operator Panel - SIEMENS

6AV6642-0DC01-1AX0

Operator Panel SIEMENS reference 6AV6642-0DC01-1AX0 for SIMATIC. SIMATIC PANEL OP177B DP BLUE MODE STN DISPLAY TOUCH AND KEYS MPI-/PROFIBUS-DP PROTOCOL RS485-/RS422-/USB- INTERFACE PRINTER INTERFACE SLOT FOR MM-CARD CONFIGURABLE. This OP SIEMENS 6AV6642-0DC01-1AX0 is at your disposal to replace your defective equipment and has a guarantee adapted to your...

€2,680.00

SI-PROFIBUS - Interface module - CONTROL TECHNIQUES

SI-PROFIBUS

This SI-PROFIBUS interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with M200, M300, M400, M600, M700 drives This SI-PROFIBUS Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,250.00

SM-Applications Plus - Interface module - CONTROL TECHNIQUES

SM-Applications Plus

This SM-Applications Plus interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-Applications Plus Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€165.00

SM-CANopen - Interface module - CONTROL TECHNIQUES

SM-CANopen

This SM-CANopen interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-CANopen Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€3,926.00

SM-DEVICENET - Interface module - CONTROL TECHNIQUES

SM-DEVICENET

This SM-DEVICENET interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-DEVICENET Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€130.00

SM-ETHERNET - Interface module - CONTROL TECHNIQUES

SM-ETHERNET

This SM-ETHERNET interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-ETHERNET Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€420.00

SM-EZMOTION - Interface module - CONTROL TECHNIQUES

SM-EZMOTION

This SM-EZMOTION interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Mentor MP drives. This SM-EZMOTION Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€420.00

SM-I/O plus - Interface module - CONTROL TECHNIQUES

SM-I/O plus

This SM-I/O plus interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-I/O plus Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€195.00

SM-Resolver - Interface module - CONTROL TECHNIQUES

SM-Resolver

This SM-Resolver interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-Resolver Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€450.00

SM-PROFIBUS DP - Interface module - CONTROL TECHNIQUES

SM-PROFIBUS DP

This SM-PROFIBUS DP interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-PROFIBUS DP Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€145.00

SM-Universal - Interface module - CONTROL TECHNIQUES

SM-Universal Encoder Plus - Interface module - CONTROL TECHNIQUES

SM-Universal Encoder Plus

This SM-Universal Encoder Plus interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-Universal Encoder Plus Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to...

€140.00

UD50 - option module - CONTROL TECHNIQUES

UD50

This CONTROL TECHNIQUES option module reference UD50 is an I/O module interface for the UNIDRIVE range. The small optional UD50 module is an interface module to be installed in a Unidrive. This UD50 option module is at your disposal in supply or in standard exchange to replace your defective equipment and has a guarantee

€389.00

UD501 - option module - CONTROL TECHNIQUES

UD51 - option module - CONTROL TECHNIQUES

UD51

This CONTROL TECHNIQUES option module reference UD51 is a encoder module interface for the UNIDRIVE range. The small optional UD51 module is an interface module to be installed in a Unidrive. This UD51 option module is at your disposal in supply or in standard exchange to replace your defective equipment and has a guarantee

€195.00

UD70 - Option module - CONTROL TECHNIQUES

UD70

This CONTROL TECHNIQUES option module reference UD70 is a module for the UNIDRIVE range The UD70 is a compact microcomputer contained in a large option module for easy installation in any size Unidrive. This CONTROL TECHNIQUES interface module is available as a supply to replace your defective equipment and has a guarantee

€590.00

SM-Applications - Interface module - CONTROL TECHNIQUES

SM-Applications

This SM-Applications interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-Applications Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€120.00

SM-PROFIBUS DP-V1 - Interface module - CONTROL TECHNIQUES

SM-PROFIBUS DP-V1

This SM-PROFIBUS DP-V1 interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-PROFIBUS DP-V1 Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€145.00