Drives

This category is made up of:
Frequency converters; Dimmers; DC Controllers; Synchronous controllers; Brushless controllers; Step by step controllers; Starters; Boards and Variable Speed Drives.

Showing 1-36 of 61 item(s)

A06B-6055-H322 - Drive - FANUC

A06B-6055-H322

This FANUC 6055 Series and A06B-6055-H322 spindle drive is designed to control FANUC 50P motors. This 3-axis variator is complete, internal radiation type, 4500 rpm This A06B-6055-H322 drive is at your disposal to replace your defective hardware and has a warranty adapted to your needs.

€3,980.00

A06B-6055-H106 - AC Spindle Servo Drive - FANUC

A06B-6055-H106

This FANUC 6055 series and reference A06B-6055-H106 is a 1-axis spindle drive. It is equipped with a FANUC A20B-1001-0120 control board.This A06B-6055-H106 drive is at your disposal to replace your defective hardware and has a warranty adapted to your needs.

€2,190.00

890CS5-0032B-B - Power module - PARKER

890CS5-0032B-B

This reference power supply module 890CS5-0032B-B and brand PARKER is a module of the AC890 series. 890CS5-0032B-B: Input: 32A, 230/400/500Vac, 7.5/15/18kW. Output: DC, 40A This PARKER power supply is at your disposal to replace your defective equipment and has an appropriate guarantee. New part number: 890CS-532320B0-000-U

€980.00

890CS5-0054B-B - Power module - PARKER

890CS5-0054B-B

This reference power supply module 890CS5-0054B-B and brand PARKER is a module of the AC890 series. 890CS5-0054B-B: Input: 54A, 230/400/500Vac, 15/30/37kW. Output: DC, 65A This PARKER power supply is at your disposal to replace your defective equipment and has an appropriate guarantee. New part number: 890CS-532540B0-000-U

€1,180.00

890CS5-0108D-D - Power module - PARKER

890CS5-0108D-D

This reference power supply module 890CS5-0108D-D and brand PARKER is a module of the AC890 series. 890CS5-0108D-D: Input: 108A, 230/400/500Vac, 30/60/75kW. Output: DC, 135A This PARKER power supply is at your disposal to replace your defective equipment and has an appropriate guarantee. New part number: 890CS-533108D0-000-U

€520.00

890CS5-0162D-D - Power module - PARKER

890CS5-0162D-D

This reference power supply module 890CS5-0162D-D and brand PARKER is a module of the AC890 series. 890CS5-0162D-D: Input: 162A, 230/400/500Vac, 45/90/110kW. Output: DC, 200A This PARKER power supply is at your disposal to replace your defective equipment and has an appropriate guarantee. New part number: 890CS-533162D0-000-U

€540.00

890CD-231300B0-000 - Drive module - PARKER

890CD-231300B0-000

This drive module reference 890CD-231300B0-000 and brand PARKER is a module of the AC890 series. 890CD-231300B0-000: 320Vdc, 4.2A, 0.55kW. Output: 3A/2.2A. This PARKER drive is at your disposal to replace your defective equipment and has an appropriate guarantee. Old reference: 890CD-2-0003B

€1,200.00

890CD-231550B0-000 - Drive module - PARKER

890CD-231550B0-000

This drive module reference 890CD-231550B0-000 and brand PARKER is a module of the AC890 series. 890CD-231550B0-000: 320Vdc, 7.6A, 1.1kW. Output: 5.5A/4A. This PARKER drive is at your disposal to replace your defective equipment and has an appropriate guarantee. Old reference: 890CD-2-0005B

€440.00

890CD-231700B0-000 - Drive module - PARKER

890CD-231700B0-000

This drive module reference 890CD-231700B0-000 and brand PARKER is a module of the AC890 series. 890CD-231700B0-000: 320Vdc, 9.3A, 1.5kW. Output: 7A/6A. This PARKER drive is at your disposal to replace your defective equipment and has an appropriate guarantee. Old reference: 890CD-2-0007B

€460.00

890CD-232110B0-000 - Drive module - PARKER

890CD-232110B0-000

This drive module reference 890CD-232110B0-000 and brand PARKER is a module of the AC890 series. 890CD-232110B0-000: 320Vdc, 15.2A, 2.2kW. Output: 11A/8A. This PARKER drive is at your disposal to replace your defective equipment and has an appropriate guarantee. Old reference: 890CD-2-0011B

€480.00

890CD-232165B0-000 - Drive module - PARKER

890CD-232165B0-000

This drive module reference 890CD-232165B0-000 and brand PARKER is a module of the AC890 series. 890CD-232165B0-000: 320Vdc, 22.2A, 4kW. Output: 16.5A/12A. This PARKER drive is at your disposal to replace your defective equipment and has an appropriate guarantee. Old reference: 890CD-2-0016B

€505.00

MR-J2-60C - Servo Amplifier - MITSUBISHI

MR-J2-60C

This MITSUBISHI servo amplifier, reference MR-J2-60C is an AC servo drive. It belongs to the MELSERVO-J2-Series. 0,6 kW Mitsubishi AC servo drive for HA-FF63, HC-SF52, HC-SF53 servo motors. This MR-J2-60C servo amplifier is at your disposal to replace your defective equipment and has a warranty adapted to your needs. Servo amplifier 100% tested on...

€860.00

R7D-APA3H - Servodrive - OMRON

R7D-APA3H

This OMRON servodrive and reference R7D-APA3H is part of the series SMARTSTEP A.R7D-APA3H : Single phase 200V - 30W, filter R88A-FIW104This R7D-APA3H servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€310.00

R7D-APA5H - Servodrive - OMRON

R7D-APA5H

This OMRON servodrive and reference R7D-APA5H is part of the series SMARTSTEP A.R7D-APA5H : Single phase 200V - 50W, filter R88A-FIW104This R7D-APA5H servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€420.00

R7D-AP01H - Servodrive - OMRON

R7D-AP01H

This OMRON servodrive and reference R7D-AP01H is part of the series SMARTSTEP A.R7D-AP01H : Single phase 200V - 100W, filter R88A-FIW104This R7D-AP01H servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€495.00

R7D-AP02H - Servodrive - OMRON

R7D-AP02H

This OMRON servodrive and reference R7D-AP02H is part of the series SMARTSTEP A.R7D-AP02H : Single phase 200V - 200W, filter R88A-FIW104This R7D-AP02H servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€890.00

R7D-AP04H - Servodrive - OMRON

R7D-AP04H

This OMRON servodrive and reference R7D-AP04H is part of the series SMARTSTEP A.R7D-AP04H : Single phase 200V - 400W, filter R88A-FIW107This R7D-AP04H servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€455.00

R7D-AP08H - Servodrive - OMRON

R7D-AP08H

This OMRON servodrive and reference R7D-AP08H is part of the series SMARTSTEP A.R7D-AP08H : Single phase 200V - 750W, filter R88A-FIW115This R7D-AP08H servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€1,810.00

R7D-APA3L - Servodrive - OMRON

R7D-APA3L

This OMRON servodrive and reference R7D-APA3L is part of the series SMARTSTEP A.R7D-APA3L : Single phase 100/115V AC, 50/60Hz - 30WThis R7D-APA3L servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€380.00

R7D-APA5L - Servodrive - OMRON

R7D-APA5L

This OMRON servodrive and reference R7D-APA5L is part of the series SMARTSTEP A.R7D-APA5L : Single phase 100/115V AC, 50/60Hz - 50WThis R7D-APA5L servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€460.00

R7D-AP01L - Servodrive - OMRON

R7D-AP01L

This OMRON servodrive and reference R7D-AP01L is part of the series SMARTSTEP A.R7D-AP01L : Single phase 100/115V AC, 50/60Hz - 100WThis R7D-AP01L servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€580.00

R7D-AP02L - Servodrive - OMRON

R7D-AP02L

This OMRON servodrive and reference R7D-AP02L is part of the series SMARTSTEP A.R7D-AP02L : Single phase 100/115V AC, 50/60Hz - 200WThis R7D-AP02L servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€670.00

R7D-AP04L - Servodrive - OMRON

R7D-AP04L

This OMRON servodrive and reference R7D-AP04L is part of the series SMARTSTEP A.R7D-AP04L : Single phase 100/115V AC, 50/60Hz - 400WThis R7D-AP04L servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€760.00

MR-J2-10C - Servo Amplifier - MITSUBISHI

MR-J2-10C

This MITSUBISHI servo amplifier, reference MR-J2-10C is an AC servo drive. It belongs to the MELSERVO-J2-Series. 0,1 kW Mitsubishi AC servo drive for HC-MF053, HC-MF13, HA-FF053, HA-FF13, HC-UF13 servo motors. This MR-J2-10C servo amplifier is at your disposal to replace your defective equipment and has a warranty adapted to your needs. Servo amplifier...

€480.00

MR-J2-20C - Servo Amplifier - MITSUBISHI

MR-J2-20C

This MITSUBISHI servo amplifier, reference MR-J2-20C is an AC servo drive. It belongs to the MELSERVO-J2-Series. 0,2 kW Mitsubishi AC servo drive for HC-MF23, HA-FF23, HC-UF23 servo motors. This MR-J2-20C servo amplifier is at your disposal to replace your defective equipment and has a warranty adapted to your needs. Servo amplifier 100% tested on...

€640.00

MR-J2-40C - Servo Amplifier - MITSUBISHI

MR-J2-40C

This MITSUBISHI servo amplifier, reference MR-J2-40C is an AC servo drive. It belongs to the MELSERVO-J2-Series. 0,4 kW Mitsubishi AC servo drive for HC-MF43, HA-FF33, HA-FF43, HC-UF43 servo motors. This MR-J2-40C servo amplifier is at your disposal to replace your defective equipment and has a warranty adapted to your needs. Servo amplifier 100% tested...

€720.00

MR-J2-70C - Servo Amplifier - MITSUBISHI

MR-J2-70C

This MITSUBISHI servo amplifier, reference MR-J2-70C is an AC servo drive. It belongs to the MELSERVO-J2-Series. 0,7 kW Mitsubishi AC servo drive for HC-MF73, HC-UF72, HC-UF73 servo motors. This MR-J2-70C servo amplifier is at your disposal to replace your defective equipment and has a warranty adapted to your needs. Servo amplifier 100% tested on...

€690.00

MR-J2-100C - Servo Amplifier - MITSUBISHI

MR-J2-100C

This MITSUBISHI servo amplifier, reference MR-J2-100C is an AC servo drive. It belongs to the MELSERVO-J2-Series. 1 kW Mitsubishi AC servo drive for HC-SF81,HC-SF102,HC-SF103 servo motors. This MR-J2-100C servo amplifier is at your disposal to replace your defective equipment and has a warranty adapted to your needs. Servo amplifier 100% tested on...

€840.00

MR-J2-200C - Servo Amplifier - MITSUBISHI

MR-J2-200C

This MITSUBISHI servo amplifier, reference MR-J2-200C is an AC servo drive. It belongs to the MELSERVO-J2-Series. 2 kW Mitsubishi AC servo drive for HC-SF121/201,HC-SF152/202,HC-SF153 servo motors. This MR-J2-200C servo amplifier is at your disposal to replace your defective equipment and has a warranty adapted to your needs. Servo amplifier 100% tested...

€1,060.00

MR-J2-350C - Servo Amplifier - MITSUBISHI

MR-J2-350C

This MITSUBISHI servo amplifier, reference MR-J2-350C is an AC servo drive. It belongs to the MELSERVO-J2-Series. 3.5 kW Mitsubishi AC servo drive for HC-SF301/352/353, HC-RF103/153 servo motors. This MR-J2-350C servo amplifier is at your disposal to replace your defective equipment and has a warranty adapted to your needs. Servo amplifier 100% tested on...

€1,140.00

MR-J2-10A - Servo Amplifier - MITSUBISHI

MR-J2-10A

This MITSUBISHI servo amplifier, reference MR-J2-10A is an AC servo drive. It belongs to the MELSERVO-J2-Series. 0,1 kW Mitsubishi AC servo drive for HC-MF053-13, HAFF053-13, HC-UF13 servo motors. This MR-J2-10A servo amplifier is at your disposal to replace your defective equipment and has a warranty adapted to your needs. Servo amplifier 100% tested on...

€480.00

MR-J2-20A - Servo Amplifier - MITSUBISHI

MR-J2-20A

This MITSUBISHI servo amplifier, reference MR-J2-20A is an AC servo drive. It belongs to the MELSERVO-J2-Series. 0,2 kW Mitsubishi AC servo drive for HC-MF23, HA-FF23, HC-UF23 servo motors. This MR-J2-20A servo amplifier is at your disposal to replace your defective equipment and has a warranty adapted to your needs. Servo amplifier 100% tested on...

€480.00

MR-J2-40A - Servo Amplifier - MITSUBISHI

MR-J2-40A

This MITSUBISHI servo amplifier, reference MR-J2-40A is an AC servo drive. It belongs to the MELSERVO-J2-Series. 0,4 kW Mitsubishi AC servo drive for HC-MF43, HA-FF33-43, HC-UF43 servo motors. This MR-J2-40A servo amplifier is at your disposal to replace your defective equipment and has a warranty adapted to your needs. Servo amplifier 100% tested on...

€480.00

MR-J2-60A - Servo Amplifier - MITSUBISHI

MR-J2-60A

This MITSUBISHI servo amplifier, reference MR-J2-60A is an AC servo drive. It belongs to the MELSERVO-J2-Series. 0,6 kW Mitsubishi AC servo drive for HC-SF52, HA-FF63, HC-SF53 servo motors. This MR-J2-60A servo amplifier is at your disposal to replace your defective equipment and has a warranty adapted to your needs. Servo amplifier 100% tested on...

€380.00

MR-J2-70A - Servo Amplifier - MITSUBISHI

MR-J2-70A

This MITSUBISHI servo amplifier, reference MR-J2-70A is an AC servo drive. It belongs to the MELSERVO-J2-Series. 0,7 kW Mitsubishi AC servo drive for HC-MF73, HC-UF72.73 servo motors. This MR-J2-70A servo amplifier is at your disposal to replace your defective equipment and has a warranty adapted to your needs. Servo amplifier 100% tested on MITSUBISHI...

€620.00

MR-J2-100A - Servo Amplifier - MITSUBISHI

MR-J2-100A

This MITSUBISHI servo amplifier, reference MR-J2-100A is an AC servo drive. It belongs to the MELSERVO-J2-Series. 1 kW Mitsubishi AC servo drive for HC-SF81, HC-SF102.103 servo motors. This MR-J2-100A servo amplifier is at your disposal to replace your defective equipment and has a warranty adapted to your needs. Servo amplifier 100% tested on MITSUBISHI...

€810.00