Catalog

Showing 1-36 of 109 item(s)

UMV 4301 22T - Synchron Controller - LEROY SOMER

UMV 4301 22T

This reference LEROY SOMER speed controller UMV4301 22T is a drive for asynchronous and synchronous motor. Inverter 15 kW, 34 A This UMV4301 22T speed controller is at your disposal to replace defective equipment and has a guarantee adapted to your needs. Speed controller reconditioned and tested in full load (test of duration) on LEROY SOMER motor.

€3,390.00

UMV 4301 40T - Synchron Controller - LEROY SOMER

UMV 4301 40T

This reference LEROY SOMER speed controller UMV4301 40T is a drive for asynchronous and synchronous motor. Inverter 30 kW, 60 A This UMV4301 40T speed controller is at your disposal to replace defective equipment and has a guarantee adapted to your needs. Speed controller reconditioned and tested in full load (test of duration) on LEROY SOMER motor.

€3,900.00

TSXP47455R - Interface Processor - TELEMECANIQUE

TSXP47455R

This TELEMECANIQUE and reference TSXP47455R processor card belongs to the Series 7 range. Module for TSX47-40 range Fipio / Fipway version 5.8 This Telemecanique TSXP47455R module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Refurbished and fully loaded power supply (time test) on TELEMECANIQUE bench.

€310.00

6AV6641-0BA11-0AX0 - Operator Panel - SIEMENS

6AV6641-0BA11-0AX0

OP SIEMENS reference 6AV6641-0BA11-0AX0 for Simatic HMI. SIMATIC OPERATOR PANEL OP77A BACKLIT LC DISPLAY, 4.5 "DISPLAY W. GRAPHICS CAPABIL MPI- / PROFIBUS-DP INTERFACE UP TO 1,5MB, FOR WINCC CONFIGURATION FLEXIBLE 2004 COMPACT HSP UPWARDS. This OP 6AV6641-0BA11-0AX0 is at your disposal to replace your defective equipment and has a guarantee adapted to...

€380.00

TSXRKD8FP - Rack - TELEMECANIQUE

TSXRKD8FP

This TELEMECANIQUE rack is reference TSXRKD8FP. It is part of the Series 7 range. UC rack (8 + 8) not venile. CPU Rack (8 + 8) no. fans. This TELEMECANIQUE rack is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Reconditioned rack and tested on automaton bench (Test 100%).

€495.00

TSXDST1682 - Output Module - TELEMECANIQUE

TSXDST1682

This TELEMECANIQUE digital output module is reference TSXDST1682. It is part of the TSX Series 7. 24 volts c.c. / static protected. 16 outputs. This TELEMECANIQUE output module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Module reconditioned and tested on a test bench (100% test).

€60.00

TSXP673 - Interface Processor - TELEMECANIQUE

TSXP673

This TELEMECANIQUE brand and TSXP673 reference processor card belongs to the TSX Series 7 range. Module for TSX67-30 Series Processor V: 2.30 This TELEMECANIQUE TSXP673 module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Module reconditioned and tested on a test bench (100% test).

€1,185.00

TSXP47420 - Interface Processor - TELEMECANIQUE

TSXP47420

This TELEMECANIQUE brand and TSXP47420 reference processor card belongs to the TSX Series 7 range. Module for TSX47-40 range version 4.3. Integrated unit link. 48k of internal RAM. 64k cartridge. This Télémécanique TSXP47420 module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€510.00

TSXSCM2116 - Communication Coupler - TELEMECANIQUE

TSXSCM2116

This TELEMECANIQUE communication module is reference TSXSCM2116. It is part of the TSX Series 7 series. Channel 0: Isolated RS232 C, Channel 1: UNI-TELWAY. This TELEMECANIQUE communication module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Module reconditioned and tested on a test bench (100% test).

€430.00

TSXMAPCPC742 - PC-Mapway board - TELEMECANIQUE

TSXMAPCPC742

This TELEMECANIQUE network coupler board is reference TSXMAPCPC742. It is part of the TSX Series 7 range. Used for the FTX 507 workstation. This TELEMECANIQUE network coupler module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Module reconditioned and tested on a test bench (100% test).

€1,065.00

UMV 4301 50T - Synchron Controller - LEROY SOMER

UMV 4301 50T

This reference LEROY SOMER controller UMV 4301 50T is a controller for asynchronous and synchronous motor. Inverter 37 kW, 70 A This UMV 4301 50T controller is at your disposal to replace defective equipment and has a guarantee adapted to your needs. Speed controller reconditioned and tested in full load (test of duration) on LEROY SOMER motor.

€6,840.00

UMV 4301 33T - Synchron Controller - LEROY SOMER

UMV 4301 33T

This reference LEROY SOMER controller UMV 4301 33T is a controller for asynchronous and synchronous motor. Inverter 22 kW, 46 A This UMV 4301 33T controller is at your disposal to replace defective equipment and has a guarantee adapted to your needs. Speed controller reconditioned and tested in full load (test of duration) on LEROY SOMER motor.

€3,370.00

UMV 4301 27T - Synchron Controller - LEROY SOMER

UMV 4301 27T

This reference LEROY SOMER speed controller UMV4301 27T is a drive for asynchronous and synchronous motor. Inverter 18,5 kW, 40 A This UMV4301 27T speed controller is at your disposal to replace defective equipment and has a guarantee adapted to your needs. Speed controller reconditioned and tested in full load (test of duration) on LEROY SOMER motor.

€3,920.00

TSXAXM162 - Axial command coupler - TELEMECANIQUE

TSXAXM162

This TELEMECANIQUE axial control coupler is reference TSXAXM162. It is part of the TSX Series 7 series. For MODICON TSX, analog, 3 inputs; 24VDC, 5 outputs. This TELEMECANIQUE axial command coupleur is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Module reconditioned and tested on a test bench (100% test).

€850.00

6AV6641-0BA11-0AX1 - Operator Panel - SIEMENS

6AV6641-0BA11-0AX1

OP SIEMENS reference 6AV6641-0BA11-0AX1 for Simatic HMI. SIMATIC OP 77A operator panel backlit LC display, 4.5 '' graphic display, MPI- / PROFIBUS-DP interface up to 1.5MB, configurable from WinCC flexible 2004 Compact HSP This OP 6AV6641-0BA11-0AX1 is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€660.00

EVD4902-E - Speed drive - LENZE

EVD4902-E

This LENZE reference EVD4902-E variable speed drive is a drive motor drive. Series: EVD 4800 - 4900 Features: 3x340/460V, 6.7kW, 16A. This LENZE drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,510.00

EVD4903-E - Speed drive - LENZE

EVD4903-E

This LENZE reference EVD4903-E variable speed drive is a drive motor drive. Series: EVD 4800 - 4900 Features: 3x340/460V, 10.5kW, 25A. This LENZE drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€3,790.00

EVD4904-E - Speed drive - LENZE

EVD4904-E

This LENZE reference EVD4904-E variable speed drive is a drive motor drive. Series: EVD 4800 - 4900 Features: 3x340/460V, 23.1kw, 55A. This LENZE drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€910.00

EVD4905-E - Speed drive - LENZE

EVD4905-E

This LENZE reference EVD4905-E variable speed drive is a drive motor drive. Series: EVD 4800 - 4900 Features: 3x340/460V, 46.2kw, 110A. This LENZE drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€3,770.00

EVD4906-E - Speed drive - LENZE

EVD4906-E

This LENZE reference EVD4906-E variable speed drive is a drive motor drive. Series: EVD 4800 - 4900 Features: 3x340/460V, 84kw, 200A. This LENZE drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€4,135.00

EVD4907-E - Speed drive - LENZE

EVD4907-E

This LENZE reference EVD4907-E variable speed drive is a drive motor drive. Series: EVD 4800 - 4900 Features: 3x340/460V, 105kw, 250A. This LENZE drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€9,900.00

EVD4908-E - Speed drive - LENZE

EVD4908-E

This LENZE reference EVD4908-E variable speed drive is a drive motor drive. Series: EVD 4800 - 4900 Features: 3x340/460V, 139kw, 330A. This LENZE drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€6,590.00

EVD4909-E - Speed drive - LENZE

EVD4909-E

This LENZE reference EVD4909-E variable speed drive is a drive motor drive. Series: EVD 4800 - 4900 Features: 3x340/460V, 210kW, 500A. This LENZE drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€10,500.00

EVD4911-E - Speed drive - LENZE

EVD4911-E

This LENZE reference EVD4911-E variable speed drive is a drive motor drive. Series: EVD 4800 - 4900 Features: 3x340/460V, 294kW, 700A. This LENZE drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€2,100.00

EVD4912-E - Speed drive - LENZE

EVD4912-E

This LENZE reference EVD4912-E variable speed drive is a drive motor drive. Series: EVD 4800 - 4900 Features: 3x340/460V, 420kW, 1000A. This LENZE drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€2,200.00

MQAF01 - PLC Module - MITSUBISHI

MQAF01

MITSUBISHI PLC reference MQAF01 . MELSEC-Q series. Master Module. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€930.00

Q61P-A1 - Power supply - MITSUBISHI

Q61P-A1

MITSUBISHI Power supply reference Q61P-A1. MELSEC-Q series. Features: 100-120VAC -> 5-24VDC This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€70.00

Q61P-A2 - Power supply - MITSUBISHI

Q61P-A2

MITSUBISHI Power supply reference Q61P-A2 . MELSEC-Q series. Features: 200-240VAC -> 5-24VDC This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€70.00

Q62P - Power supply - MITSUBISHI

Q62P

MITSUBISHI Power supply reference Q62P. MELSEC-Q series. Features: 100-240VAC -> 5-24VDC This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€140.00

Q63P - Power supply - MITSUBISHI

Q63P

MITSUBISHI Power supply reference Q63P . MELSEC-Q series. Features: 24VDC -> 5-24VDC This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€140.00

Q64P - Power supply - MITSUBISHI

Q64P

MITSUBISHI Power supply reference Q64P. MELSEC-Q series. Features: 100-240VAC -> 5-24VDC This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€80.00

Q00JCPU-E - CPU - MITSUBISHI

Q00JCPU-E

MITSUBISHI CPU reference Q00JCPU-E. MELSEC-Q series. Features: Combination of CPU module (single processor), 5 Slot Base unit and power supply This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€1,100.00

Q00CPU - CPU - MITSUBISHI

Q00CPU

MITSUBISHI CPU reference Q00CPU. MELSEC-Q series. Features: CPU multi processor. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€70.00

Q01CPU - CPU - MITSUBISHI

Q01CPU

MITSUBISHI CPU reference Q01CPU. MELSEC-Q series. Features: CPU multi processor. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€140.00

Q02CPU - CPU - MITSUBISHI

Q02CPU

MITSUBISHI CPU reference Q02CPU. MELSEC-Q series. Features: CPU multi processor. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€180.00

Q02HCPU - CPU - MITSUBISHI

Q02HCPU

MITSUBISHI CPU reference Q02HCPU. MELSEC-Q series. Features: CPU multi processor. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€160.00