Catalog

Showing 1-36 of 68 item(s)

TSXASY800 - Output Module - TELEMECANIQUE

TSXASY800

This analog output module TELEMECANIQUE is reference TSXASY800. It is part of the MODICON PREMIUM range This TELEMECANIQUE output module (8) is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Module reconditioned and tested on PLC bench (Test 100%).

€1,000.00

TSX3705001 - PLC - SCHNEIDER ELECTRIC

TSX3705001

Schneider Electric PLC / Telemecanique reference TSX3705001. Modicon PLC Micro. Modicon TSX Micro - Tsx 3705 ca This Schneider TSX3705001 is at your disposal to replace your defective equipment and has a warranty adapted to your needs. PLC SCHNEIDER reconditioned and tested under full load (duration test) on TSX Micro Modicon bench.

€380.00

TSXP47455R - Interface Processor - TELEMECANIQUE

TSXP47455R

This TELEMECANIQUE and reference TSXP47455R processor card belongs to the Series 7 range. Module for TSX47-40 range Fipio / Fipway version 5.8 This Telemecanique TSXP47455R module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Refurbished and fully loaded power supply (time test) on TELEMECANIQUE bench.

€310.00

TSXRKD8FP - Rack - TELEMECANIQUE

TSXRKD8FP

This TELEMECANIQUE rack is reference TSXRKD8FP. It is part of the Series 7 range. UC rack (8 + 8) not venile. CPU Rack (8 + 8) no. fans. This TELEMECANIQUE rack is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Reconditioned rack and tested on automaton bench (Test 100%).

€495.00

TSXDST1682 - Output Module - TELEMECANIQUE

TSXDST1682

This TELEMECANIQUE digital output module is reference TSXDST1682. It is part of the TSX Series 7. 24 volts c.c. / static protected. 16 outputs. This TELEMECANIQUE output module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Module reconditioned and tested on a test bench (100% test).

€60.00

TSXP673 - Interface Processor - TELEMECANIQUE

TSXP673

This TELEMECANIQUE brand and TSXP673 reference processor card belongs to the TSX Series 7 range. Module for TSX67-30 Series Processor V: 2.30 This TELEMECANIQUE TSXP673 module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Module reconditioned and tested on a test bench (100% test).

€1,185.00

TSXP47420 - Interface Processor - TELEMECANIQUE

TSXP47420

This TELEMECANIQUE brand and TSXP47420 reference processor card belongs to the TSX Series 7 range. Module for TSX47-40 range version 4.3. Integrated unit link. 48k of internal RAM. 64k cartridge. This Télémécanique TSXP47420 module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€510.00

TSXSCM2116 - Communication Coupler - TELEMECANIQUE

TSXSCM2116

This TELEMECANIQUE communication module is reference TSXSCM2116. It is part of the TSX Series 7 series. Channel 0: Isolated RS232 C, Channel 1: UNI-TELWAY. This TELEMECANIQUE communication module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Module reconditioned and tested on a test bench (100% test).

€430.00

TSXMAPCPC742 - PC-Mapway board - TELEMECANIQUE

TSXMAPCPC742

This TELEMECANIQUE network coupler board is reference TSXMAPCPC742. It is part of the TSX Series 7 range. Used for the FTX 507 workstation. This TELEMECANIQUE network coupler module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Module reconditioned and tested on a test bench (100% test).

€1,065.00

TSXAXM162 - Axial command coupler - TELEMECANIQUE

TSXAXM162

This TELEMECANIQUE axial control coupler is reference TSXAXM162. It is part of the TSX Series 7 series. For MODICON TSX, analog, 3 inputs; 24VDC, 5 outputs. This TELEMECANIQUE axial command coupleur is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Module reconditioned and tested on a test bench (100% test).

€850.00

TSXASY410 - Output Module - TELEMECANIQUE

TSXASY410

This analog output module TELEMECANIQUE is reference TSXASY410. It is part of the MODICON PREMIUM range This TELEMECANIQUE output module (4) is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Module reconditioned and tested on PLC bench (Test 100%).

€1,200.00

DKC01.3-016-7-FW - Ecodrive Controller - INDRAMAT

DKC01.3-016-7-FW

This INDRAMAT reference Ecodrive controller DKC01.3-016-7-FW is designed for INDRAMAT MKD motors or third-party resolvers. 16A controller. Series 01, Configuration 3. Nominal voltage of 300V. This INDRAMAT ecodrive controller is at your disposal to replace your defective equipment and has a suitable guarantee. Drive controller tested on engine test bench.

€1,760.00

DKC01.3-040-7-FW - Ecodrive Controller - INDRAMAT

DKC01.3-040-7-FW

This INDRAMAT reference Ecodrive controller DKC01.3-040-7-FW is designed for INDRAMAT MKD, MKE, MHD motors... 40A controller. Series 01, Configuration 3. Nominal voltage of 300V. This INDRAMAT ecodrive controller is at your disposal to replace your defective equipment and has a suitable guarantee. Drive controller tested on engine test bench.

€600.00

DKC01.3-100-7-FW - Ecodrive Controller - INDRAMAT

DKC01.3-100-7-FW

This INDRAMAT reference Ecodrive controller DKC01.3-100-7-FW is designed for INDRAMAT MKD, MKE, MHD motors... 100A controller. Series 01, Configuration 3. Nominal voltage of 300V. This INDRAMAT ecodrive controller is at your disposal to replace your defective equipment and has a suitable guarantee. Drive controller tested on engine test bench.

€1,690.00

DKC01.3-200-7-FW - Ecodrive Controller - INDRAMAT

DKC01.3-200-7-FW

This INDRAMAT reference Ecodrive controller DKC01.3-200-7-FW is designed for INDRAMAT MKD, MKE, MHD motors... 200A controller. Series 01, Configuration 3. Nominal voltage of 300V. This INDRAMAT ecodrive controller is at your disposal to replace your defective equipment and has a suitable guarantee. Drive controller tested on engine test bench.

€2,500.00

MR-J3-10A - Servo Amplifier - MITSUBISHI

MR-J3-10A

This MITSUBISHI servo amplifier, reference MR-J3-10A is an AC servo drive. It belongs to the MELSERVO-J3 Series range. 1.1A Mitsubishi AC servo drive for HF-MP053, HF-MP13, HF-KP053, HF-KP13 servo motors. 3PH or 1PH, 200 to 230VAC, 50/60Hz. This MR-J3-10A servo amplifier is at your disposal to replace your defective equipment and has a warranty adapted to...

€380.00

MR-J3-20A - Servo Amplifier - MITSUBISHI

MR-J3-20A

This MITSUBISHI servo amplifier, reference MR-J3-20A is an AC servo drive. It belongs to the MELSERVO-J3 Series range. 1.5A Mitsubishi AC servo drive for HF-MP23, HF-KP23 servo motors. 3PH or 1PH, 200 to 230VAC, 50/60Hz. This MR-J3-20A servo amplifier is at your disposal to replace your defective equipment and has a warranty adapted to your needs.

€420.00

MR-J3-40A - Servo Amplifier - MITSUBISHI

MR-J3-40A

This MITSUBISHI servo amplifier, reference MR-J3-40A is an AC servo drive. It belongs to the MELSERVO-J3 Series range. 2.8A Mitsubishi AC servo drive for HF-MP43, HF-KP43 servo motors. 3PH or 1PH, 200 to 230VAC, 50/60Hz. This MR-J3-40A servo amplifier is at your disposal to replace your defective equipment and has a warranty adapted to your needs.

€420.00

MR-J3-60A - Servo Amplifier - MITSUBISHI

MR-J3-60A

This MITSUBISHI servo amplifier, reference MR-J3-60A is an AC servo drive. It belongs to the MELSERVO-J3 Series range. 3.2A Mitsubishi AC servo drive for HF-SP51 and HF-SP52 servo motors. 3PH or 1PH, 200 to 230VAC, 50/60Hz. This MR-J3-60A servo amplifier is at your disposal to replace your defective equipment and has a warranty adapted to your needs.

€560.00

MR-J3-70A - Servo Amplifier - MITSUBISHI

MR-J3-70A

This MITSUBISHI servo amplifier, reference MR-J3-70A is an AC servo drive. It belongs to the MELSERVO-J3 Series range. 5.8A Mitsubishi AC servo drive for HF-MP73, HF-KP73 and HC-UP72 servo motors. 3PH or 1PH, 200 to 230VAC, 50/60Hz. This MR-J3-70A servo amplifier is at your disposal to replace your defective equipment and has a warranty adapted to your...

€600.00

MR-J3-100A - Servo Amplifier - MITSUBISHI

MR-J3-100A

This MITSUBISHI servo amplifier, reference MR-J3-100A is an AC servo drive. It belongs to the MELSERVO-J3 Series range. 6.0A Mitsubishi AC servo drive for HF-SP81, HF-SP102 and HC-LP101 servo motors. 3PH, 200 to 230VAC, 50/60Hz. This MR-J3-100A servo amplifier is at your disposal to replace your defective equipment and has a warranty adapted to your needs.

€680.00

MR-J3-200A - Servo Amplifier - MITSUBISHI

MR-J3-200A

This MITSUBISHI servo amplifier, reference MR-J3-200A is an AC servo drive. It belongs to the MELSERVO-J3 Series range. 11.0A Mitsubishi AC servo drive for HF-SP121, HF-SP201, HP-SP152 and HF-SP202 servo motors. 3PH, 200 to 230VAC, 50/60Hz. This MR-J3-200A servo amplifier is at your disposal to replace your defective equipment and has a warranty adapted...

€820.00

MR-J3-350A - Servo Amplifier - MITSUBISHI

MR-J3-350A

This MITSUBISHI servo amplifier, reference MR-J3-350A is an AC servo drive. It belongs to the MELSERVO-J3 Series range. 17.0A Mitsubishi AC servo drive for HF-SP301, HF-SP352, HC-RP103 and HC-RP153 servo motors. 3PH, 200 to 230VAC, 50/60Hz. This MR-J3-350A servo amplifier is at your disposal to replace your defective equipment and has a warranty adapted...

€985.00

MR-J3-500A - Servo Amplifier - MITSUBISHI

MR-J3-500A

This MITSUBISHI servo amplifier, reference MR-J3-500A is an AC servo drive. It belongs to the MELSERVO-J3 Series range. 28.0A Mitsubishi AC servo drive for HF-SP421, HF-SP502, HC-RP353, HC-RP503 servo motors. 3PH, 200 to 230VAC, 50/60Hz. This MR-J3-500A servo amplifier is at your disposal to replace your defective equipment and has a warranty adapted to...

€1,380.00

MR-J3-700A - Servo Amplifier - MITSUBISHI

MR-J3-700A

This MITSUBISHI servo amplifier, reference MR-J3-700A is an AC servo drive. It belongs to the MELSERVO-J3 Series range. 37A Mitsubishi AC servo drive for HF-SP702, servo motors. 3PH, 200 to 230VAC, 50/60Hz. This MR-J3-700A servo amplifier is at your disposal to replace your defective equipment and has a warranty adapted to your needs.

€1,820.00

MR-J3-11KA - Servo Amplifier - MITSUBISHI

MR-J3-11KA

This MITSUBISHI servo amplifier, reference MR-J3-11KA is an AC servo drive. It belongs to the MELSERVO-J3 Series range. 68A Mitsubishi AC servo drive for HA-LP801/12K1, HA-LP11K1M/11K2, servo motors. 3PH, 200 to 230VAC, 50/60Hz. This MR-J3-11KA servo amplifier is at your disposal to replace your defective equipment and has a warranty adapted to your needs.

€3,100.00

MR-J3-15KA - Servo Amplifier - MITSUBISHI

MR-J3-15KA

This MITSUBISHI servo amplifier, reference MR-J3-15KA is an AC servo drive. It belongs to the MELSERVO-J3 Series range. 87A Mitsubishi AC servo drive for HA-LP15K1/15K1M/15K2, servo motors. 3PH, 200 to 230VAC, 50/60Hz. This MR-J3-15KA servo amplifier is at your disposal to replace your defective equipment and has a warranty adapted to your needs.

€4,730.00

MR-J3-22KA - Servo Amplifier - MITSUBISHI

MR-J3-22KA

This MITSUBISHI servo amplifier, reference MR-J3-22KA is an AC servo drive. It belongs to the MELSERVO-J3 Series range. 126A Mitsubishi AC servo drive for HA-LP20K1/25K1/22K1M/22K2 servo motors. 3PH, 200 to 230VAC, 50/60Hz. This MR-J3-22KA servo amplifier is at your disposal to replace your defective equipment and has a warranty adapted to your needs.

€5,260.00

MR-J3-10A1 - Servo Amplifier - MITSUBISHI

MR-J3-10A1

This MITSUBISHI servo amplifier, reference MR-J3-10A1 is an AC servo drive. It belongs to the MELSERVO-J3 Series range. 1.1A Mitsubishi AC servo drive for HF-MP053/13, HP-KP053/13. 1 PH, 100 to 120 VAC, 50/60Hz. This MR-J3-10A1 servo amplifier is at your disposal to replace your defective equipment and has a warranty adapted to your needs.

€300.00

MR-J3-20A1 - Servo Amplifier - MITSUBISHI

MR-J3-20A1

This MITSUBISHI servo amplifier, reference MR-J3-20A1 is an AC servo drive. It belongs to the MELSERVO-J3 Series range. 1.5A Mitsubishi AC servo drive for HF-MP23, HP-KP23. 1 PH, 100 to 120 VAC, 50/60Hz. This MR-J3-20A1 servo amplifier is at your disposal to replace your defective equipment and has a warranty adapted to your needs.

€380.00

MR-J3-40A1 - Servo Amplifier - MITSUBISHI

MR-J3-40A1

This MITSUBISHI servo amplifier, reference MR-J3-40A1 is an AC servo drive. It belongs to the MELSERVO-J3 Series range. 2.8A Mitsubishi AC servo drive for HF-MP43, HP-KP43. 1 PH, 100 to 120 VAC, 50/60Hz. This MR-J3-40A1 servo amplifier is at your disposal to replace your defective equipment and has a warranty adapted to your needs.

€520.00

MR-J3-10B - Servo Amplifier - MITSUBISHI

MR-J3-10B

This MITSUBISHI servo amplifier, reference MR-J3-10B is an AC servo drive. It belongs to the MELSERVO-J3 Series range. 1.1A Mitsubishi AC servo drive for HF-MP053, HF-MP13, HF-KP053 et HF-KP053 et HF-KP13 servo motors. 3PH or 1PH, 200 to 230VAC, 50/60Hz. This MR-J3-10B servo amplifier is at your disposal to replace your defective equipment and has a...

€165.00

MR-J3-20B - Servo Amplifier - MITSUBISHI

MR-J3-20B

This MITSUBISHI servo amplifier, reference MR-J3-20B is an AC servo drive. It belongs to the MELSERVO-J3 Series range. 1.5A Mitsubishi AC servo drive for HF-MP23, HF-KP23 servo motors. 3PH or 1PH, 200 to 230VAC, 50/60Hz. This MR-J3-20B servo amplifier is at your disposal to replace your defective equipment and has a warranty adapted to your needs.

€200.00

MR-J3-40B - Servo Amplifier - MITSUBISHI

MR-J3-40B

This MITSUBISHI servo amplifier, reference MR-J3-40B is an AC servo drive. It belongs to the MELSERVO-J3 Series range. 2.8A Mitsubishi AC servo drive for HF-MP43, HF-KP43 servo motors. 3PH or 1PH, 200 to 230VAC, 50/60Hz. This MR-J3-40B servo amplifier is at your disposal to replace your defective equipment and has a warranty adapted to your needs

€470.00

MR-J3-60B - Servo Amplifier - MITSUBISHI

MR-J3-60B

This MITSUBISHI servo amplifier, reference MR-J3-60B is an AC servo drive. It belongs to the MELSERVO-J3 Series range. 3.2A Mitsubishi AC servo drive for HF-SP51 and HF-SP52 servo motors. 3PH or 1PH, 200 to 230VAC, 50/60Hz. This MR-J3-60B servo amplifier is at your disposal to replace your defective equipment and has a warranty adapted to your needs

€520.00

MR-J3-70B - Servo Amplifier - MITSUBISHI

MR-J3-70B

This MITSUBISHI servo amplifier, reference MR-J3-70B is an AC servo drive. It belongs to the MELSERVO-J3 Series range. 5.8A Mitsubishi AC servo drive for HF-MP73, HF-KP73 and HC-UP72 servo motors. 3PH or 1PH, 200 to 230VAC, 50/60Hz. This MR-J3-70B servo amplifier is at your disposal to replace your defective equipment and has a warranty adapted to your...

€560.00