Catalog

Showing 1-36 of 41 item(s)

BSM63N-175AA - Servo Motor brushless - BALDOR

BSM63N-175AA

This reference motor BSM63N-175AA and brand BALDOR is a Brushless AC motor. N series range. TORQ CONT STALL: 0.77 NM, CUR CONT STALL / A RMS: 1,01, POWER: 0,24kW, RATED SPEED / RPM: 4000, RATED BUS VOLTS: : 10000 This BALDOR engine is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€520.00

BSM50N-275AA - Servo Motor brushless - BALDOR

BSM50N-275AA

This reference motor BSM50N-275AA and brand BALDOR is a Brushless AC motor. N series range TORQ CONT STALL: 0.91 NM, CUR CONT STALL / A RMS: 1.42, POWER: 0.18kW, RATED SPEED / RPM: 2000, RATED BUS VOLTS: MECH SPEED: 10000 This BALDOR motor is at your disposal to replace your equipment and has a guarantee adapted to your needs

€580.00

BSM63N-275BA - Servo Motor brushless - BALDOR

BSM63N-275BA

This reference motor BSM63N-275BA and brand BALDOR is a Brushless AC motor. N series range TORQ CONT STALL: 1,47 NM, CUR CONT STALL / A RMS: 1,94, POWER: 0,53kW, RATED SPEED / RPM: 4000, RATED BUS VOLTS: MECH SPEED: 10000 This BALDOR engine is at your disposal to replace your equipment and has a guarantee adapted to your needs

€620.00

TSXP47455R - Interface Processor - TELEMECANIQUE

TSXP47455R

This TELEMECANIQUE and reference TSXP47455R processor card belongs to the Series 7 range. Module for TSX47-40 range Fipio / Fipway version 5.8 This Telemecanique TSXP47455R module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Refurbished and fully loaded power supply (time test) on TELEMECANIQUE bench.

€310.00

TSXRKD8FP - Rack - TELEMECANIQUE

TSXRKD8FP

This TELEMECANIQUE rack is reference TSXRKD8FP. It is part of the Series 7 range. UC rack (8 + 8) not venile. CPU Rack (8 + 8) no. fans. This TELEMECANIQUE rack is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Reconditioned rack and tested on automaton bench (Test 100%).

€495.00

TSXDST1682 - Output Module - TELEMECANIQUE

TSXDST1682

This TELEMECANIQUE digital output module is reference TSXDST1682. It is part of the TSX Series 7. 24 volts c.c. / static protected. 16 outputs. This TELEMECANIQUE output module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Module reconditioned and tested on a test bench (100% test).

€60.00

TSXP673 - Interface Processor - TELEMECANIQUE

TSXP673

This TELEMECANIQUE brand and TSXP673 reference processor card belongs to the TSX Series 7 range. Module for TSX67-30 Series Processor V: 2.30 This TELEMECANIQUE TSXP673 module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Module reconditioned and tested on a test bench (100% test).

€1,185.00

TSXP47420 - Interface Processor - TELEMECANIQUE

TSXP47420

This TELEMECANIQUE brand and TSXP47420 reference processor card belongs to the TSX Series 7 range. Module for TSX47-40 range version 4.3. Integrated unit link. 48k of internal RAM. 64k cartridge. This Télémécanique TSXP47420 module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€510.00

TSXSCM2116 - Communication Coupler - TELEMECANIQUE

TSXSCM2116

This TELEMECANIQUE communication module is reference TSXSCM2116. It is part of the TSX Series 7 series. Channel 0: Isolated RS232 C, Channel 1: UNI-TELWAY. This TELEMECANIQUE communication module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Module reconditioned and tested on a test bench (100% test).

€430.00

TSXMAPCPC742 - PC-Mapway board - TELEMECANIQUE

TSXMAPCPC742

This TELEMECANIQUE network coupler board is reference TSXMAPCPC742. It is part of the TSX Series 7 range. Used for the FTX 507 workstation. This TELEMECANIQUE network coupler module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Module reconditioned and tested on a test bench (100% test).

€1,065.00

TSXAXM162 - Axial command coupler - TELEMECANIQUE

TSXAXM162

This TELEMECANIQUE axial control coupler is reference TSXAXM162. It is part of the TSX Series 7 series. For MODICON TSX, analog, 3 inputs; 24VDC, 5 outputs. This TELEMECANIQUE axial command coupleur is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Module reconditioned and tested on a test bench (100% test).

€850.00

DOP11B-10 - Operator Panel - SEW

DOP11B-10

SEW reference operator panel DOP11B-10 for DOP11B range -160 x 32 pixels – Liquid crystal display – LED backlighting – IP66 membrane keyboard with navigation keys – Numeric keypad – Six function keys – Six LEDs – Optional ETHERNET – 500 kilobytes of application memory This SEW operator panel is at your disposal to replace your defective equipment and has...

€850.00

DOP11B-15 - Operator Panel - SEW

DOP11B-15

SEW reference operator panel DOP11B-15 for DOP11B range – 240 x 64 pixels – Liquid crystal display – LED backlighting – IP66 membrane keyboard with navigation keys – Numeric keypad – Six function keys – Six LEDs – Optional ETHERNET – 500 kilobytes of application memory This SEW operator panel is at your disposal to replace your defective equipment and has...

€900.00

DOP11B-20 - Operator Panel - SEW

DOP11B-20

SEW reference operator panel DOP11B-20 for DOP11B range – 240 x 64 pixels or text of 8 x 4/4 x 20 characters – LCD graphic display (monochrome) with backlight – Power supply 24 V, 350 mA max. – Two serial interfaces (RS232 & RS422 / RS485) – IP66 membrane keyboard with navigation keys, numeric keypad and eight function keys – 16 diodes (two colors red...

€950.00

DOP11B-25 - Operator Panel - SEW

DOP11B-25

SEW reference operator panel DOP11B-25 for DOP11B range – 320 x 240 pixels – Touch screen (16 gray levels, STN, 5.7˝) with backlight – Power supply 24 V, 450 mA max. – Two serial interfaces (RS232, RS422 / RS485) – IP66 – Horizontal or vertical mounting – ETHERNET 10/100Mbit – 12 MB of application memory This SEW operator panel is at your disposal to...

€1,950.00

DOP11B-30 - Operator Panel - SEW

DOP11B-30

SEW reference operator panel DOP11B-30 for DOP11B range – 320 x 240 pixels – Touch screen (64 k colors, CSTN, 5.7˝) with backlight – Power supply 24 V, 450 mA max. – Two serial interfaces (RS232, RS422 / RS485) – IP66 – Horizontal or vertical mounting – ETHERNET 10/100Mbit – 12 MB of application memory This SEW operator panel is at your disposal to...

€2,990.00

DOP11B-40 - Operator Panel - SEW

DOP11B-40

SEW reference operator panel DOP11B-40 for DOP11B range – 320 x 240 pixels – Color screen (64 k colors, CSTN, 5.7˝) with backlight – Power supply 24 V, 500 mA max. – Two serial interfaces (RS232, RS422 / RS485) – IP66 membrane keyboard with navigation keys, numeric keypad and 16 function keys – 16 diodes (two colors red / green) – ETHERNET 10/100 Mbit –...

€2,240.00

DOP11B-50 - Operator Panel - SEW

DOP11B-50

SEW reference operator panel DOP11B-50 for DOP11B range – 800 x 600 pixels – Touch screen (64 k colors, TFT, 10.4˝) with backlight – Power supply 24 V, 1 A max. – Two serial interfaces (RS232, RS422 / RS485) – IP66 – Horizontal or vertical mounting – ETHERNET 10/100 Mbit – 12 MB of application memory This SEW operator panel is at your disposal to replace...

€7,900.00

DOP11B-60 - Operator Panel - SEW

DOP11B-60

SEW reference operator panel DOP11B-60 for DOP11B range – 1024 x 768 pixels – Touch screen (64k colors, TFT, 15˝) – Power supply 24 V, 1.7 A max. – CCFL backlighting – Horizontal or vertical mounting – Two serial interfaces (RS232, RS422 / RS485) – 10/100 Mbit ETHERNET – 12 MB of application memory This SEW operator panel is at your disposal to replace...

€4,330.00

DOP11C-51 - Operator Panel - SEW

DOP11C-51

SEW reference operator panel DOP11C-51 for DOP11B range 24V, 6W, 800x480 (16:9), Battery BR2032 This SEW operator panel is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€625.00

M400-024 00041A - Inverter Drive - NIDEC

M400-024 00041A

This reference M400-024 00041A and NIDEC brand variable speed drive is a drive from the UNIDRIVE M400 range. Characteristic: Three-phase 380/480Vac, 4.1A, 1.5kW. This NIDEC drive, also LEROY SOMER or CONTROL TECHNIQUES is at your disposal to replace your defective equipment and has an appropriate guarantee. Drive tested on a motor test bench

€390.00

M400-024 00013A - Inverter Drive - NIDEC

M400-024 00013A

This reference M400-024 00013A and NIDEC brand variable speed drive is a drive from the UNIDRIVE M400 range. Characteristic: Three-phase 380/480Vac, 1.3A, 0.37kW. This NIDEC drive, also LEROY SOMER or CONTROL TECHNIQUES is at your disposal to replace your defective equipment and has an appropriate guarantee. Drive tested on a motor test bench

€1,330.00

M400-024 00018A - Inverter Drive - NIDEC

M400-024 00018A

This reference M400-024 00018A and NIDEC brand variable speed drive is a drive from the UNIDRIVE M400 range. Characteristic: Three-phase 380/480Vac, 1.8A, 0.55kW. This NIDEC drive, also LEROY SOMER or CONTROL TECHNIQUES is at your disposal to replace your defective equipment and has an appropriate guarantee. Drive tested on a motor test bench

€400.00

M400-024 00023A - Inverter Drive - NIDEC

M400-024 00023A

This reference M400-024 00023A and NIDEC brand variable speed drive is a drive from the UNIDRIVE M400 range. Characteristic: Three-phase 380/480Vac, 2.3A, 0.75kW. This NIDEC drive, also LEROY SOMER or CONTROL TECHNIQUES is at your disposal to replace your defective equipment and has an appropriate guarantee. Drive tested on a motor test bench

€1,500.00

M400-024 00032A - Inverter Drive - NIDEC

M400-024 00032A

This reference M400-024 00032A and NIDEC brand variable speed drive is a drive from the UNIDRIVE M400 range. Characteristic: Three-phase 380/480Vac, 3.2A, 1.1kW. This NIDEC drive, also LEROY SOMER or CONTROL TECHNIQUES is at your disposal to replace your defective equipment and has an appropriate guarantee. Drive tested on a motor test bench

€400.00

M400-034 00056A - Inverter Drive - NIDEC

M400-034 00056A

This reference M400-034 00056A and NIDEC brand variable speed drive is a drive from the UNIDRIVE M400 range. Characteristic: Three-phase 380/480Vac, 5.6A, 2.2kW. This NIDEC drive, also LEROY SOMER or CONTROL TECHNIQUES is at your disposal to replace your defective equipment and has an appropriate guarantee. Drive tested on a motor test bench

€450.00

M400-034 00073A - Inverter Drive - NIDEC

M400-034 00073A

This reference M400-034 00073A and NIDEC brand variable speed drive is a drive from the UNIDRIVE M400 range. Characteristic: Three-phase 380/480Vac, 7.3A, 3kW. This NIDEC drive, also LEROY SOMER or CONTROL TECHNIQUES is at your disposal to replace your defective equipment and has an appropriate guarantee. Drive tested on a motor test bench

€600.00

M400-034 00094A - Inverter Drive - NIDEC

M400-034 00094A

This reference M400-034 00094A and NIDEC brand variable speed drive is a drive from the UNIDRIVE M400 range. Characteristic: Three-phase 380/480Vac, 9.4A, 4kW. This NIDEC drive, also LEROY SOMER or CONTROL TECHNIQUES is at your disposal to replace your defective equipment and has an appropriate guarantee. Drive tested on a motor test bench

€450.00

M400-044 00135A - Inverter Drive - NIDEC

M400-044 00135A

This reference M400-044 00135A and NIDEC brand variable speed drive is a drive from the UNIDRIVE M400 range. Characteristic: Three-phase 380/480Vac, 13.5A, 5.5kW. This NIDEC drive, also LEROY SOMER or CONTROL TECHNIQUES is at your disposal to replace your defective equipment and has an appropriate guarantee. Drive tested on a motor test bench

€500.00

M400-044 00170A - Inverter Drive - NIDEC

M400-044 00170A

This reference M400-044 00170A and NIDEC brand variable speed drive is a drive from the UNIDRIVE M400 range. Characteristic: Three-phase 380/480Vac, 17A, 7.5kW. This NIDEC drive, also LEROY SOMER or CONTROL TECHNIQUES is at your disposal to replace your defective equipment and has an appropriate guarantee. Drive tested on a motor test bench

€850.00

M400-054 00270A - Inverter Drive - NIDEC

M400-054 00270A

This reference M400-054 00270A and NIDEC brand variable speed drive is a drive from the UNIDRIVE M400 range. Characteristic: Three-phase 380/480Vac, 27A, 11kW. This NIDEC drive, also LEROY SOMER or CONTROL TECHNIQUES is at your disposal to replace your defective equipment and has an appropriate guarantee. Drive tested on a motor test bench

€3,360.00

M400-054 00300A - Inverter Drive - NIDEC

M400-054 00300A

This reference M400-054 00300A and NIDEC brand variable speed drive is a drive from the UNIDRIVE M400 range. Characteristic: Three-phase 380/480Vac, 30A, 15kW. This NIDEC drive, also LEROY SOMER or CONTROL TECHNIQUES is at your disposal to replace your defective equipment and has an appropriate guarantee. Drive tested on a motor test bench

€850.00

M400-064 00350A - Inverter Drive - NIDEC

M400-064 00350A

This reference M400-064 00350A and NIDEC brand variable speed drive is a drive from the UNIDRIVE M400 range. Characteristic: Three-phase 380/480Vac, 35A, 15kW. This NIDEC drive, also LEROY SOMER or CONTROL TECHNIQUES is at your disposal to replace your defective equipment and has an appropriate guarantee. Drive tested on a motor test bench

€1,000.00

M400-064 00420A - Inverter Drive - NIDEC

M400-064 00420A

This reference M400-064 00420A and NIDEC brand variable speed drive is a drive from the UNIDRIVE M400 range. Characteristic: Three-phase 380/480Vac, 42A, 18.5kW. This NIDEC drive, also LEROY SOMER or CONTROL TECHNIQUES is at your disposal to replace your defective equipment and has an appropriate guarantee. Drive tested on a motor test bench

€1,000.00

M400-064 00470A - Inverter Drive - NIDEC

M400-064 00470A

This reference M400-064 00470A and NIDEC brand variable speed drive is a drive from the UNIDRIVE M400 range. Characteristic: Three-phase 380/480Vac, 47A, 22kW. This NIDEC drive, also LEROY SOMER or CONTROL TECHNIQUES is at your disposal to replace your defective equipment and has an appropriate guarantee. Drive tested on a motor test bench

€1,000.00

M400-074 00660A - Inverter Drive - NIDEC

M400-074 00660A

This reference M400-074 00660A and NIDEC brand variable speed drive is a drive from the UNIDRIVE M400 range. Characteristic: Three-phase 380/480Vac, 66A, 30kW. This NIDEC drive, also LEROY SOMER or CONTROL TECHNIQUES is at your disposal to replace your defective equipment and has an appropriate guarantee. Drive tested on a motor test bench

€4,900.00