XBT GT6330 - HMI - TELEMECANIQUE
XBT GT6330 - HMI - TELEMECANIQUE
XBT GT6330 - HMI - TELEMECANIQUE
XBT GT6330 - HMI - TELEMECANIQUE
XBT GT6330 - HMI - TELEMECANIQUE
XBT GT6330 - HMI - TELEMECANIQUE
XBT GT6330 - HMI - TELEMECANIQUE
XBT GT6330 - HMI - TELEMECANIQUE
XBT GT6330 - HMI - TELEMECANIQUE
XBT GT6330 - HMI - TELEMECANIQUE

XBT GT6330 - HMI - TELEMECANIQUE

XBT GT6330

This terminal XBT GT6330 and brand TELEMECANIQUE is a terminal of the Magelis range.

Color backlit TFT LCD, SVGA resolution, 4096 colors, TFT LCD, Ethernet port.

This XBT GT6330 Telemecanique terminal is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

State
  • Refurbished Service Exchange
  • Refurbished Supply
Warranty
€1,480.00

Options produits

échange standard reconditionné

Service échange standard

Systèmes reconditionnés et testés

Garantie de
6 à 12 mois

échange standard neuf

Service échange standard

Systèmes neufs

Garantie de
12 à 24 mois

fourniture reconditionnée

Service fourniture

Systèmes reconditionnés et testés

Garantie de
6 à 12 mois

fourniture neuve

Service fourniture

Systèmes neufs

Garantie de
12 à 24 mois

fourniture pour pièces

Service fourniture

Systèmes vendus pour pièces

réparation

Service réparation

Reconditionnement de systèmes endommagés

Garantie de
6 à 12 mois

Livraison rapide

Livraison
rapide

Livraison rapide

Produits
garantis

Livraison rapide

Paiement
sécurisé

 

The screens in the XBT GT range are cULus certified and CSA certified.

These units have been developed to comply with the following standards:

- UL 508: industrial control equipment

- UL 1604: electrical equipment for use in Class I and II, Division 2 and Class III hazardous locations

- UL 60950: Information Technology Equipment Security Standard

- CAN / CSA-C22.2, No. 14, No. 213 and No. 60950 various industrial control equipment in hazardous locations.

Connect the power cord to the power connector on the side of the XBT GT unit via the power plug.

Make sure to use a Class 2 stabilized power supply to connect the line to ground.

To improve noise resistance, twist the ends of the power cord wires before connecting them to the power outlet.

The power cord of the XBT GT unit must not be attached with the main circuit lines (high current and voltage) or the input and output signal lines. It should not be located near these lines either.

Connect a surge protector to handle surges.

Minimize the length of the power cord to reduce noise.

Height
24 cm / 9,4 in24
Width
6 cm / 2,3 in
Length
31 cm / 12,2 in
Weight
3 kg / 6,6 lbs
Family
MAGELIS
Reference
XBT GT6330
Refurbished
3002410592707
300971530804

Since its creation, the Telemecanique brand has been pursuing an innovation policy, which has become one of the world’s first references in automatism management.

The story of Telemécanique is read through that of its inventions, initiated with the launch of the first contactor on bars. A patent filed the same year of its acquisition, in 1924! It will develop contactors D became world reference. The 1980s marked the acquisition of Telemechanics by Schneider Electric (1988).

12 other products in the same category:

www.standard-exchange-industry.com is getting a new look !

We are tweaking the last settings, in the meantime the orders are temporarily disabled.

However, don't hesitate to check out our new website!

For all information, contact us by e-mail on contact@standard-exchange-industry.com or by phone on +33 3 24 52 97 66