Catalog

Showing 1-36 of 60 item(s)

M-YSB3040KN001 - Servo Motor - NSK

M-YSB3040KN001

This servomotor M-YSB3040KN001 and brand NSK is a motor of the range YSB Series Megatorque Motor Maximum torque 40 Nm, input value: 1.6 Arms, Power in watt: 200 W This servomotor M-YSB3040KN001 NSK is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,480.00

R7D-APA3H - Servodrive - OMRON

R7D-APA3H

This OMRON servodrive and reference R7D-APA3H is part of the series SMARTSTEP A.R7D-APA3H : Single phase 200V - 30W, filter R88A-FIW104This R7D-APA3H servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€310.00

R7D-APA5H - Servodrive - OMRON

R7D-APA5H

This OMRON servodrive and reference R7D-APA5H is part of the series SMARTSTEP A.R7D-APA5H : Single phase 200V - 50W, filter R88A-FIW104This R7D-APA5H servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€420.00

R7D-AP01H - Servodrive - OMRON

R7D-AP01H

This OMRON servodrive and reference R7D-AP01H is part of the series SMARTSTEP A.R7D-AP01H : Single phase 200V - 100W, filter R88A-FIW104This R7D-AP01H servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€495.00

R7D-AP02H - Servodrive - OMRON

R7D-AP02H

This OMRON servodrive and reference R7D-AP02H is part of the series SMARTSTEP A.R7D-AP02H : Single phase 200V - 200W, filter R88A-FIW104This R7D-AP02H servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€890.00

R7D-AP04H - Servodrive - OMRON

R7D-AP04H

This OMRON servodrive and reference R7D-AP04H is part of the series SMARTSTEP A.R7D-AP04H : Single phase 200V - 400W, filter R88A-FIW107This R7D-AP04H servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€455.00

R7D-AP08H - Servodrive - OMRON

R7D-AP08H

This OMRON servodrive and reference R7D-AP08H is part of the series SMARTSTEP A.R7D-AP08H : Single phase 200V - 750W, filter R88A-FIW115This R7D-AP08H servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€1,810.00

R7D-APA3L - Servodrive - OMRON

R7D-APA3L

This OMRON servodrive and reference R7D-APA3L is part of the series SMARTSTEP A.R7D-APA3L : Single phase 100/115V AC, 50/60Hz - 30WThis R7D-APA3L servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€380.00

R7D-APA5L - Servodrive - OMRON

R7D-APA5L

This OMRON servodrive and reference R7D-APA5L is part of the series SMARTSTEP A.R7D-APA5L : Single phase 100/115V AC, 50/60Hz - 50WThis R7D-APA5L servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€460.00

R7D-AP01L - Servodrive - OMRON

R7D-AP01L

This OMRON servodrive and reference R7D-AP01L is part of the series SMARTSTEP A.R7D-AP01L : Single phase 100/115V AC, 50/60Hz - 100WThis R7D-AP01L servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€580.00

R7D-AP02L - Servodrive - OMRON

R7D-AP02L

This OMRON servodrive and reference R7D-AP02L is part of the series SMARTSTEP A.R7D-AP02L : Single phase 100/115V AC, 50/60Hz - 200WThis R7D-AP02L servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€670.00

R7D-AP04L - Servodrive - OMRON

R7D-AP04L

This OMRON servodrive and reference R7D-AP04L is part of the series SMARTSTEP A.R7D-AP04L : Single phase 100/115V AC, 50/60Hz - 400WThis R7D-AP04L servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€760.00

R7M-A10030-BS1 - Servo motor - OMRON

R7M-A10030-BS1

This OMRON R7M-A10030-BS1 servo motor is a SMARTSTEP A series motor. Characteristics: 230V, 100W, 0.87A, with brake for R7D-AP01H servo drive. This R7M-A10030-BS1 servomotor is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€570.00

R7M-A20030-S1-D - Servo motor - OMRON

R7M-A20030-S1-D

This OMRON R7M-A20030-S1-D servo motor is a SMARTSTEP A series motor. Characteristics: 230V, 200W, 2A without brake for R7D-AP02H servo drive. This R7M-A20030-S1-D servomotor is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€530.00

R7M-A75030-BS1-D - Servo motor - OMRON

R7M-A75030-BS1-D

This OMRON R7M-A75030-BS1-D servo motor is a SMARTSTEP A series motor. Characteristics: 230V, 750W, 4.4A, with brake for R7D-AP08H servo drive. This R7M-A75030-BS1-D servomotor is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,795.00

FX3-CPU000000 - Security module - SICK

FX3-CPU000000

This FX3-CPU000000 main module from the Flexi Soft range is configurable by software (Flexi Soft Designer). 24Vdc, category 4. Main module sold without system connector (FX3-MPL000001) This FX3-CPU000000 module from SICK is at your disposal to replace your defective hardware.

€499.00

FX3-MPL000001 - Connector for security module - SICK

FX3-MPL000001

This connector for main module FX3-MPL000001 from the Flexi Soft range is for FX3-CPU0 or FX3-CPU1 modules. System connector: Flexi-Soft system power supply and save system configuration (without EFI-enabled devices). screw terminal blocks This FX3-MPL000001 connector from SICK is at your disposal to replace your defective equipment.

€125.00

FX3-XTDI80002 - I/O module - SICK

FX3-XTDI80002

This FX3-XTDI80002 input/output module from the Flexi Soft range is configurable by software (Flexi Soft Designer). 8 inputs and 8 outputs. Category 4 This FX3-XTDI80002 module from SICK is at your disposal to replace your defective hardware.

€155.00

FX0-GCAN00000 - Security module - SICK

FX0-GCAN00000

This FX0-GCAN00000 main module from the Flexi Soft range is configurable by software (Flexi Soft Designer). CANOPEN fieldbus, powered by Flexibus+ This FX0-GCAN00000 module from SICK is at your disposal to replace your defective equipment.

€980.00

FX0-GENT00000 - Security module - SICK

FX0-GENT00000

This FX0-GENT00000 main module from the Flexi Soft range is configurable by software (Flexi Soft Designer). ETHERNET fieldbus, powered by Flexibus+ This FX0-GENT00000 module from SICK is at your disposal to replace your defective equipment.

€1,175.00

FX3-XTIO84002 - I/O module - SICK

FX3-XTIO84002

This FX3-XTIO84002 input/output module from the Flexi Soft range is configurable by software (Flexi Soft Designer). 8 inputs and 6 outputs. Category 4 This FX3-XTIO84002 module from SICK is at your disposal to replace your defective hardware.

€495.00

MDS-D2-V2-8080 - Servo drive - MITSUBISHI

MDS-D2-V2-8080

This MITSUBISHI drive, reference MDS-D2-V2-8080 is a servo drive. It belongs to the MDS-D2 range. Features: 1x200-230V, 80/80A This MITSUBISHI drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€4,720.00

MDS-D2-V2-2020 - Servo drive - MITSUBISHI

MDS-D2-V2-2020

This MITSUBISHI drive, reference MDS-D2-V2-2020 is a servo drive. It belongs to the MDS-D2 range. Features: 1x200-230V, 20/20A This MITSUBISHI drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€6,010.00

MDS-D2-V2-4020 - Servo drive - MITSUBISHI

MDS-D2-V2-4020

This MITSUBISHI drive, reference MDS-D2-V2-4020 is a servo drive. It belongs to the MDS-D2 range. Features: 1x200-230V, 40/20A This MITSUBISHI drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€5,510.00

MDS-D2-V2-4040 - Servo drive - MITSUBISHI

MDS-D2-V2-4040

This MITSUBISHI drive, reference MDS-D2-V2-4040 is a servo drive. It belongs to the MDS-D2 range. Features: 1x200-230V, 40/40A This MITSUBISHI drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€6,900.00

MDS-D2-V2-8040 - Servo drive - MITSUBISHI

MDS-D2-V2-8040

This MITSUBISHI drive, reference MDS-D2-V2-8040 is a servo drive. It belongs to the MDS-D2 range. Features: 1x200-230V, 80/40A This MITSUBISHI drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€4,137.00

MDS-D2-V2-16080 - Servo drive - MITSUBISHI

MDS-D2-V2-16080

This MITSUBISHI drive, reference MDS-D2-V2-16080 is a servo drive. It belongs to the MDS-D2 range. Features: 1x200-230V, 160/80A This MITSUBISHI drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€5,800.00

MDS-D2-V2-160160 - Servo drive - MITSUBISHI

MDS-D2-V2-160160

This MITSUBISHI drive, reference MDS-D2-V2-160160 is a servo drive. It belongs to the MDS-D2 range. Features: 1x200-230V, 160/160A This MITSUBISHI drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€8,450.00

3001-403-1-00 - Servo controller - SEW

3001-403-1-00

This drive with reference 3001-403-1-00 and SEW brand is a MOVITRAC 3000 series axis module. Features: 3x400VAC, 2.6kVA, 5A. This SEW drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,500.00

3001-403-4-00 - Servo controller - SEW

3001-403-4-00

This drive with reference 3001-403-4-00 and SEW brand is a MOVITRAC 3000 series axis module. Features: 3x400VAC, 2.6kVA, 5A. This SEW drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€560.00

3002-403-1-00 - Servo controller - SEW

3002-403-1-00

This drive with reference 3002-403-1-00 and SEW brand is a MOVITRAC 3000 series axis module. Features: 3x400VAC, 3.8kVA, 7.2A. This SEW drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€475.00

3002-403-4-00 - Servo controller - SEW

3002-403-4-00

This drive with reference 3002-403-4-00 and SEW brand is a MOVITRAC 3000 series axis module. Features: 3x400VAC, 3.8kVA, 7.2A. This SEW drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€300.00

3003-403-1-00 - Servo controller - SEW

3003-403-1-00

This drive with reference 3003-403-1-00 and SEW brand is a MOVITRAC 3000 series axis module. Features: 3x400VAC, 5kVA, 9.4A. This SEW drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,100.00

3003-403-4-00 - Servo controller - SEW

3003-403-4-00

This drive with reference 3003-403-4-00 and SEW brand is a MOVITRAC 3000 series axis module. Features: 3x400VAC, 5kVA, 9.4A. This SEW drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€700.00

3004-403-1-00 - Servo controller - SEW

3004-403-1-00

This drive with reference 3004-403-1-00 and SEW brand is a MOVITRAC 3000 series axis module. Features: 3x400VAC, 6.6kVA, 12.2A. This SEW drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€840.00

3004-403-4-00 - Servo controller - SEW

3004-403-4-00

This drive with reference 3004-403-4-00 and SEW brand is a MOVITRAC 3000 series axis module. Features: 3x400VAC, 6.6kVA, 12.2A. This SEW drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€420.00