Catalog

Showing 1-14 of 14 item(s)

On sale!

S30A-4011CA - Laser Scanner - SICK

S30A-4011CA

This S3000 series laser scanner has four protection fields and four servo fields that are freely programmable using your SICK software. You can therefore configure your laser scanner according to the conditions of your installation. This SICK S30A-4011CA scanner is at your disposal to replace your defective equipment.

€2,585.00

S30A-4011BA - Laser Scanner - SICK

S30A-4011BA

This S3000 Series safety laser scanner features 1 protective field set and four servo fields that are freely programmable using your SICK software. You can therefore configure your laser scanner according to the conditions of your installation. Protective Field range : 4 meters This SICK S30A-4011BA scanner is at your disposal to replace your defective...

€2,220.00

S30A-7011CA - Laser Scanner - SICK

S30A-7011CA

This S3000 series safety laser scanner features 4 protective field sets and 12 control fields that are freely programmable using your SICK software. You can therefore configure your laser scanner according to the conditions of your installation. Protective Field range : 7 m. This SICK S30A-7011CA scanner is at your disposal to replace your defective...

€715.00

BSM90N-175AA - Servo Motor brushless - BALDOR

BSM90N-175AA

This reference motor BSM90N-175AA and brand BALDOR is a Brushless motor AC.Gamme C series TORQ CONT STALL: 6 NM, CUR CONT STALL / AT RMS: 8.07, POWER: 0.53kW, RATED SPEED / RPM: 4000, RATED BUS VOLTS: 300, PEAK CUR / AT RMS: 29.05, MAX MECH SPEED 6000 This BALDOR Engine is at your disposal to replace your equipment and has a guarantee adapted to your needs

€1,060.00

JZNC-NIF02-1 - I/O Interface board - YASKAWA

JZNC-NIF02-1

This JZNC-NIF02-1 and YASKAWA interface I/O board is an NX100 robot control unit interface board. Robot I/F unit, associated with a CPS-420F power supply and CPU JZNC-NRK01. This JZNC-NIF02-1 YASKAWA interface board is available to replace your defective equipment and has a guarantee adapted to your needs.

€1,875.00

CPS-420F - Control power supply - YASKAWA

CPS-420F

This YASKAWA control ower Supply and CPS-420F reference is used for the MOTOMAN NX100 controller. NX100 compatible with EPX2800, EPX1250 and EPX2050. This CPS-420F power supply is at your disposal to replace your defective equipment and has a guarantee of operation adapted to your needs.

€1,110.00

S30A-6011EA - Laser Scanner - SICK

S30A-6011EA

This safety laser scanner can only be used in combination with the EFI system group, eg. with a Flexi Soft safety control system or another S300 or S3000 safety laser scanner. Range: 5.5 m This SICK S30A-6011EA scanner is at your disposal to replace your defective equipment.

€2,560.00

S30A-7011EA - Laser Scanner - SICK

S30A-7011EA

This S3000 Series safety laser scanner features 1 protective field set and 64 servo fields that are freely programmable using your SICK software. You can therefore configure your laser scanner according to the conditions of your installation. Protective Field range : 7 meters This SICK S30A-7011EA scanner is at your disposal to replace your defective...

€890.00

CM150DU-24F - IGBT Power module - MITSUBISHI

CM150DU-24F

This MITSUBISHI power module reference CM150DU-24F is part of the range F SERIES MITSUBISHI CM150DU-24F : 1200V, 150A, 600W, Isolated Type, High Power Switching This power module CM150DU-24F is at your disposal in supply to replace your defective module and has a guarantee adapted to your needs. New power module.

€115.00

CM50DU-24F - IGBT Power module - MITSUBISHI

CM50DU-24F

This MITSUBISHI power module reference CM50DU-24F is part of the range F SERIES MITSUBISHI CM50DU-24F : 1200V, 50A, 320W, Isolated Type, High Power Switching This power module CM50DU-24F is at your disposal in supply to replace your defective module and has a guarantee adapted to your needs. New power module.

€86.00

CM75DU-24F - IGBT Power module - MITSUBISHI

CM75DU-24F

This MITSUBISHI power module reference CM75DU-24F is part of the range F SERIES MITSUBISHI CM75DU-24F : 1200V, 75A, 450W, Isolated Type, High Power Switching This power module CM75DU-24F is at your disposal in supply to replace your defective module and has a guarantee adapted to your needs. New power module.

€92.00

CM100DU-24F - IGBT Power module - MITSUBISHI

CM100DU-24F

This MITSUBISHI power module reference CM100DU-24F is part of the range F SERIES MITSUBISHI CM100DU-24F : 1200V, 100A, 500W, Isolated Type, High Power Switching This power module CM100DU-24F is at your disposal in supply to replace your defective module and has a guarantee adapted to your needs. New power module.

€99.00

CM200DU-24F - IGBT Power module - MITSUBISHI

CM200DU-24F

This MITSUBISHI power module reference CM200DU-24F is part of the range F SERIES MITSUBISHI CM200DU-24F : 1200V, 200A, 830W, Isolated Type, High Power Switching This power module CM200DU-24F is at your disposal in supply to replace your defective module and has a guarantee adapted to your needs. New power module.

€132.00

CM300DU-24F - IGBT Power module - MITSUBISHI

CM300DU-24F

This MITSUBISHI power module reference CM300DU-24F is part of the range F SERIES MITSUBISHI CM300DU-24F : 1200V, 300A, 960W, Isolated Type, High Power Switching This power module CM300DU-24F is at your disposal in supply to replace your defective module and has a guarantee adapted to your needs. New power module.

€270.00