Catalog

Showing 1-27 of 27 item(s)

TSXP47455R - Interface Processor - TELEMECANIQUE

TSXP47455R

This TELEMECANIQUE and reference TSXP47455R processor card belongs to the Series 7 range. Module for TSX47-40 range Fipio / Fipway version 5.8 This Telemecanique TSXP47455R module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Refurbished and fully loaded power supply (time test) on TELEMECANIQUE bench.

€310.00

TSXRKD8FP - Rack - TELEMECANIQUE

TSXRKD8FP

This TELEMECANIQUE rack is reference TSXRKD8FP. It is part of the Series 7 range. UC rack (8 + 8) not venile. CPU Rack (8 + 8) no. fans. This TELEMECANIQUE rack is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Reconditioned rack and tested on automaton bench (Test 100%).

€495.00

TSXDST1682 - Output Module - TELEMECANIQUE

TSXDST1682

This TELEMECANIQUE digital output module is reference TSXDST1682. It is part of the TSX Series 7. 24 volts c.c. / static protected. 16 outputs. This TELEMECANIQUE output module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Module reconditioned and tested on a test bench (100% test).

€60.00

TSXP673 - Interface Processor - TELEMECANIQUE

TSXP673

This TELEMECANIQUE brand and TSXP673 reference processor card belongs to the TSX Series 7 range. Module for TSX67-30 Series Processor V: 2.30 This TELEMECANIQUE TSXP673 module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Module reconditioned and tested on a test bench (100% test).

€1,185.00

TSXP47420 - Interface Processor - TELEMECANIQUE

TSXP47420

This TELEMECANIQUE brand and TSXP47420 reference processor card belongs to the TSX Series 7 range. Module for TSX47-40 range version 4.3. Integrated unit link. 48k of internal RAM. 64k cartridge. This Télémécanique TSXP47420 module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€510.00

TSXSCM2116 - Communication Coupler - TELEMECANIQUE

TSXSCM2116

This TELEMECANIQUE communication module is reference TSXSCM2116. It is part of the TSX Series 7 series. Channel 0: Isolated RS232 C, Channel 1: UNI-TELWAY. This TELEMECANIQUE communication module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Module reconditioned and tested on a test bench (100% test).

€430.00

TSXMAPCPC742 - PC-Mapway board - TELEMECANIQUE

TSXMAPCPC742

This TELEMECANIQUE network coupler board is reference TSXMAPCPC742. It is part of the TSX Series 7 range. Used for the FTX 507 workstation. This TELEMECANIQUE network coupler module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Module reconditioned and tested on a test bench (100% test).

€1,065.00

TSXAXM162 - Axial command coupler - TELEMECANIQUE

TSXAXM162

This TELEMECANIQUE axial control coupler is reference TSXAXM162. It is part of the TSX Series 7 series. For MODICON TSX, analog, 3 inputs; 24VDC, 5 outputs. This TELEMECANIQUE axial command coupleur is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Module reconditioned and tested on a test bench (100% test).

€850.00

BWU2702 - PROFIBUS safety module - BIHL+WIEDEMANN

BWU2702

This BIHL+WIEDEMANN brand BWU2702 gateway module is from the AS-i 3.0 PROFIBUS-Gateways range ASi-3 PROFIBUS gateway with integrated safety monitor, 2 ASi masters, 1 power supply for 2 ASi circuits, 4 discrete inputs, expandable to 62 2-channel safety inputs, 1922 2-channel safety inputs in max configuration, 4 circuits (2 x relay outputs and 2 x...

€805.00

BWU2822 - PROFIBUS safety module - BIHL+WIEDEMANN

BWU2822

This BIHL+WIEDEMANN brand BWU2822 gateway module is from the AS-i 3.0 PROFIBUS-Gateways range ASi-3 PROFIBUS gateway with integrated safety monitor, 2 ASi-3 masters, integrated decoupling, max. 4 A per ASi circuit, ASi current measurement in the gateway, 6 discrete inputs or 3 2-channel safety inputs (SIL 3, cat. 4), expandable to 62 2-channel safety...

€1,450.00

BWU2793 - PROFIBUS safety module - BIHL+WIEDEMANN

BWU2793

This BIHL+WIEDEMANN brand BWU2793 gateway module is from the AS-i 3.0 PROFIBUS-Gateways range ASi-3 PROFIBUS gateway with integrated safety monitor, 1 ASi-3 master, integrated decoupling, max. 4 A per ASi circuit, ASi current measurement in the gateway, 6 discrete inputs or 3 2-channel safety inputs (SIL 3, cat. 4), expandable to 31 2-channel safety...

€350.00

BWU2602 - PROFIBUS safety module - BIHL+WIEDEMANN

BWU2602

This BIHL+WIEDEMANN brand BWU2602 gateway module is from the AS-i 3.0 PROFIBUS-Gateways range ASi-3 PROFIBUS gateway with integrated safety monitor, 2 ASi masters, 1 power supply for 2 ASi circuits, 4 discrete inputs, expandable to 62 2-channel safety inputs, 1922 2-channel safety inputs in max configuration, 4 circuits (2 x relay outputs and 2 x...

€1,200.00

BWU2202 - PROFIBUS safety module - BIHL+WIEDEMANN

BWU2202

This BIHL+WIEDEMANN brand BWU2202 gateway module is from the AS-i 3.0 PROFIBUS-Gateways range ASi-3 PROFIBUS gateway with integrated safety monitor, 2 ASi masters, 1 power supply for 2 ASi circuits, 4 discrete inputs, expandable to 62 2-channel safety inputs, 4 enabling circuits (2 x relay outputs and 2 x signal outputs) safety outputs), expandable to 16...

€840.00

BWU2204 - PROFIBUS safety module - BIHL+WIEDEMANN

BWU2204

This BIHL+WIEDEMANN brand BWU2204 gateway module is from the AS-i 3.0 PROFIBUS-Gateways range ASi-3 PROFIBUS gateway with integrated safety monitor, 1 ASi master, 1 power supply for 2 ASi circuits, 4 discrete inputs, expandable to 62 2-channel safety inputs, 4 enabling circuits (2 x relay outputs and 2 x signal outputs) electronic safety devices),...

€650.00

BWU2206 - PROFIBUS safety module - BIHL+WIEDEMANN

BWU2206

This BIHL+WIEDEMANN brand BWU2206 gateway module is from the AS-i 3.0 PROFIBUS-Gateways range ASi-3 PROFIBUS gateway with integrated safety monitor, 1 ASi master, 1 power supply for 2 ASi circuits, expandable to 62 2-channel safety inputs, 2 enable circuits (2 x 2 relay outputs), expandable to 16 safety outputs , diagnostics and configuration via Ethernet...

€250.00

BWU3053 - PROFIBUS safety module - BIHL+WIEDEMANN

BWU3053

This BIHL+WIEDEMANN brand BWU3053 gateway module is from the AS-i 3.0 PROFIBUS-Gateways range 24 volt ASi-3 PROFIBUS gateway in stainless steel, 1 ASi-3 master, integrated decoupling, max. 4 A per ASi circuit, duplicate address detection, ASi fault check, IP20 This BIHL+WIEDEMANN brand BWU3053 module is at your disposal to replace your defective equipment.

€1,900.00

MP25A4R - DC drive - CONTROL TECHNIQUES

MP25A4R

This variable speed drive for DC motor reference MP25A4R and brand Control Techniques is a drive from the MENTOR MP range. Characteristics: 24 to 480V, excitation current: 8A, armature current: 25A This Control Techniques drive is at your disposal to replace your defective equipment and has an appropriate guarantee. Drive tested on an engine test bench.

€2,520.00

MP45A4R - DC drive - CONTROL TECHNIQUES

MP45A4R

This variable speed drive for DC motor reference MP45A4R and brand Control Techniques is a drive from the MENTOR MP range. Characteristics: 24 to 480V, excitation current: 8A, armature current: 45A This Control Techniques drive is at your disposal to replace your defective equipment and has an appropriate guarantee. Drive tested on an engine test bench.

€5,600.00

MP75A4R - DC drive - CONTROL TECHNIQUES

MP75A4R

This variable speed drive for DC motor reference MP75A4R and brand Control Techniques is a drive from the MENTOR MP range. Characteristics: 24 to 480V, excitation current: 8A, armature current: 75A This Control Techniques drive is at your disposal to replace your defective equipment and has an appropriate guarantee. Drive tested on an engine test bench.

€3,900.00

MP105A4R - DC drive - CONTROL TECHNIQUES

MP105A4R

This variable speed drive for DC motor reference MP105A4R and brand Control Techniques is a drive from the MENTOR MP range. Characteristics: 24 to 480V, excitation current: 8A, armature current: 105A This Control Techniques drive is at your disposal to replace your defective equipment and has an appropriate guarantee. Drive tested on an engine test bench.

€7,000.00

MP155A4R - DC drive - CONTROL TECHNIQUES

MP155A4R

This variable speed drive for DC motor reference MP155A4R and brand Control Techniques is a drive from the MENTOR MP range. Characteristics: 24 to 480V, excitation current: 8A, armature current: 155A This Control Techniques drive is at your disposal to replace your defective equipment and has an appropriate guarantee. Drive tested on an engine test bench.

€2,890.00

MP210A4R - DC drive - CONTROL TECHNIQUES

MP210A4R

This variable speed drive for DC motor reference MP210A4R and brand Control Techniques is a drive from the MENTOR MP range. Characteristics: 24 to 480V, excitation current: 8A, armature current: 210A This Control Techniques drive is at your disposal to replace your defective equipment and has an appropriate guarantee. Drive tested on an engine test bench.

€4,850.00

MP350A4R - DC drive - CONTROL TECHNIQUES

MP350A4R

This variable speed drive for DC motor reference MP350A4R and brand Control Techniques is a drive from the MENTOR MP range. Characteristics: 24 to 480V, excitation current: 20A, armature current: 350A This Control Techniques drive is at your disposal to replace your defective equipment and has an appropriate guarantee. Drive tested on an engine test bench.

€7,700.00

MP420A4R - DC drive - CONTROL TECHNIQUES

MP420A4R

This variable speed drive for DC motor reference MP420A4R and brand Control Techniques is a drive from the MENTOR MP range. Characteristics: 24 to 480V, excitation current: 20A, armature current: 420A This Control Techniques drive is at your disposal to replace your defective equipment and has an appropriate guarantee. Drive tested on an engine test bench.

€10,600.00

MP550A4R - DC drive - CONTROL TECHNIQUES

MP550A4R

This variable speed drive for DC motor reference MP550A4R and brand Control Techniques is a drive from the MENTOR MP range. Characteristics: 24 to 480V, excitation current: 20A, armature current: 550A This Control Techniques drive is at your disposal to replace your defective equipment and has an appropriate guarantee. Drive tested on an engine test bench.

€9,200.00

MP700A4R - DC drive - CONTROL TECHNIQUES

MP700A4R

This variable speed drive for DC motor reference MP700A4R and brand Control Techniques is a drive from the MENTOR MP range. Characteristics: 24 to 480V, excitation current: 20A, armature current: 750A This Control Techniques drive is at your disposal to replace your defective equipment and has an appropriate guarantee. Drive tested on an engine test bench.

€16,500.00

MP825A4R - DC drive - CONTROL TECHNIQUES

MP825A4R

This variable speed drive for DC motor reference MP825A4R and brand Control Techniques is a drive from the MENTOR MP range. Characteristics: 24 to 480V, excitation current: 20A, armature current: 825A This Control Techniques drive is at your disposal to replace your defective equipment and has an appropriate guarantee. Drive tested on an engine test bench.

€10,600.00