Brushless Controlers

Showing 1-36 of 37 item(s)

MKS51A005-503-50 - Servo controller - SEW

MKS51A005-503-50

This reference servo controller MKS51A005-503-50 and SEW brand is a servo controller for three-phase AC motors. MOVIDYN series. Servo controller of 5 kW, 3x380-500 Vac, 50 / 60Hz, 4.5A AC. Switch-mode power supply: 29 W. This SEW drive is at your disposal to replace your defective equipment and has a warranty adapted to your needs.

€1,280.00

MKS51A010-503-50 - Servo controller - SEW

MKS51A010-503-50

This reference servo controller MKS51A010-503-50 and SEW brand is a servo controller for three-phase AC motors. MOVIDYN series. Servo controller of 10 kW, 3x380-500 Vac, 50 / 60Hz, 9A AC. Switch-mode power supply: 29 W. This SEW drive is at your disposal to replace your defective equipment and has a warranty adapted to your needs.

€2,050.00

A06B-6096-H301 - Servo Amplifier Module - FANUC

A06B-6096-H301

This servo amplifier module A06B-6096-H301 and brand FANUC is a 3-axis AC drive. SVM3-12/12/12 series. Input: 283-325V, 1.85kW. - Nominal output 230V ~ L axis : 3A, M axis : 3A, N axis : 3A. With FSSB interface. This A06B-6096-H301servo amplifier module is at your disposal to replace your defective hardware and has a warranty adapted to your needs.Servo...

€2,000.00

A06B-6096-H302 - Servo Amplifier Module - FANUC

A06B-6096-H302

This servo amplifier module A06B-6096-H302 and brand FANUC is a 3-axis AC drive. SVM3-12/12/20 series. Input: 283-325V, 2.45kW. - Nominal output 230V ~ L axis : 3A, M axis : 3A, N axis : 5.9A. With FSSB interface. This A06B-6096-H302 servo amplifier module is at your disposal to replace your defective hardware and has a warranty adapted to your...

€2,600.00

A06B-6096-H303 - Servo Amplifier Module - FANUC

A06B-6096-H303

This servo amplifier module A06B-6096-H303 and brand FANUC is a 3-axis AC drive. SVM3-12/20/20 series Input:283-325V, 3.10kW. - Nominal output 230V ~ L axis : 3A, M axis : 5.9A, N axis : 5.9A. With FSSB interface. This A06B-6096-H303 servo amplifier module is at your disposal to replace your defective hardware and has a warranty adapted to your...

€3,200.00

A06B-6096-H304 - Servo Amplifier Module - FANUC

A06B-6096-H304

This servo amplifier module A06B-6096-H304 and brand FANUC is a 3-axis AC drive. SVM3-20/20/20 series Input:283-325V, 3.7kW. - Nominal output 230V ~ L axis: 5.9A, M axis: 5.9A, N axis: 5.9A. With FSSB interface. This A06B-6096-H304 servo amplifier module is at your disposal to replace your defective hardware and has a warranty adapted to your needsServo...

€2,900.00

A06B-6096-H305 - Servo Amplifier Module - FANUC

A06B-6096-H305

This servo amplifier module A06B-6096-H305 and brand FANUC is a 3-axis AC drive. SVM3-12/12/40 series Input:283-325V, 3.7kW. - Nominal output 230V ~ L axis: 3A, M axis: 3A, N axis: 12.5A. With FSSB interface. This A06B-6096-H305 servo amplifier module is at your disposal to replace your defective hardware and has a warranty adapted to your needsServo...

€2,550.00

A06B-6096-H306 - Servo Amplifier Module - FANUC

A06B-6096-H306

This servo amplifier module A06B-6096-H306 and brand FANUC is a 3-axis AC drive. SVM3-12/20/40 series Input:283-325V, 3.7kW. - Nominal output 230V ~ L axis: 3A, M axis: 5.9A, N axis: 12.5A. With FSSB interface. This A06B-6096-H306 servo amplifier module is at your disposal to replace your defective hardware and has a warranty adapted to your needsServo...

€2,700.00

A06B-6096-H307 - Servo Amplifier Module - FANUC

A06B-6096-H307

This servo amplifier module A06B-6096-H307 and brand FANUC is a 3-axis AC drive. SVM3-20/20/40 series Input:283-325V, 4.35kW. - Nominal output 230V ~ L axis: 5.9A, M axis: 5.9A, N axis: 12.5A. With FSSB interface. This A06B-6096-H307 servo amplifier module is at your disposal to replace your defective hardware and has a warranty adapted to your...

€3,340.00

A06B-6079-H301 - Servo Amplifier Module - FANUC

A06B-6079-H301

This servo amplifier module A06B-6079-H301 and brand FANUC is a 3-axis AC drive. SVM3-12/12/12 series Input:283-325V, 1.85kW. - Nominal output 230V ~ L axis: 3A, M axis: 3A, N axis: 3A. With Type A interface. This A06B-6079-H301 servo amplifier module is at your disposal to replace your defective hardware and has a warranty adapted to your needsServo...

€1,890.00

A06B-6079-H302 - Servo Amplifier Module - FANUC

A06B-6079-H302

This servo amplifier module A06B-6079-H302 and brand FANUC is a 3-axis AC drive. SVM3-12/12/20 series Input:283-325V, 1.85kW. - Nominal output 230V ~ L axis: 3A, M axis: 3A, N axis: 5.9A. With Type A interface. This A06B-6079-H302 servo amplifier module is at your disposal to replace your defective hardware and has a warranty adapted to your needsServo...

€2,000.00

A06B-6079-H303 - Servo Amplifier Module - FANUC

A06B-6079-H303

This servo amplifier module A06B-6079-H303 and brand FANUC is a 3-axis AC drive. SVM3-12/20/20 series Input:283-325V, 3.1kW. - Nominal output 230V ~ L axis: 3A, M axis: 5.9A, N axis: 5.9A. With Type A interface. This A06B-6079-H303 servo amplifier module is at your disposal to replace your defective hardware and has a warranty adapted to your needsServo...

€2,050.00

A06B-6079-H304 - Servo Amplifier Module - FANUC

A06B-6079-H304

This servo amplifier module A06B-6079-H304 and brand FANUC is a 3-axis AC drive. SVM3-20/20/20 series Input:283-325V, 3.7kW. - Nominal output 230V ~ L axis: 5.9A, M axis: 5.9A, N axis: 5.9A. With Type A interface. This A06B-6079-H304 servo amplifier module is at your disposal to replace your defective hardware and has a warranty adapted to your...

€1,900.00

DKC01.3-016-7-FW - Ecodrive Controller - INDRAMAT

DKC01.3-016-7-FW

This INDRAMAT reference Ecodrive controller DKC01.3-016-7-FW is designed for INDRAMAT MKD motors or third-party resolvers. 16A controller. Series 01, Configuration 3. Nominal voltage of 300V. This INDRAMAT ecodrive controller is at your disposal to replace your defective equipment and has a suitable guarantee. Drive controller tested on engine test bench.

€1,760.00

DKC01.3-040-7-FW - Ecodrive Controller - INDRAMAT

DKC01.3-040-7-FW

This INDRAMAT reference Ecodrive controller DKC01.3-040-7-FW is designed for INDRAMAT MKD, MKE, MHD motors... 40A controller. Series 01, Configuration 3. Nominal voltage of 300V. This INDRAMAT ecodrive controller is at your disposal to replace your defective equipment and has a suitable guarantee. Drive controller tested on engine test bench.

€600.00

DKC01.3-100-7-FW - Ecodrive Controller - INDRAMAT

DKC01.3-100-7-FW

This INDRAMAT reference Ecodrive controller DKC01.3-100-7-FW is designed for INDRAMAT MKD, MKE, MHD motors... 100A controller. Series 01, Configuration 3. Nominal voltage of 300V. This INDRAMAT ecodrive controller is at your disposal to replace your defective equipment and has a suitable guarantee. Drive controller tested on engine test bench.

€1,690.00

DKC01.3-200-7-FW - Ecodrive Controller - INDRAMAT

DKC01.3-200-7-FW

This INDRAMAT reference Ecodrive controller DKC01.3-200-7-FW is designed for INDRAMAT MKD, MKE, MHD motors... 200A controller. Series 01, Configuration 3. Nominal voltage of 300V. This INDRAMAT ecodrive controller is at your disposal to replace your defective equipment and has a suitable guarantee. Drive controller tested on engine test bench.

€2,500.00

3G3MX2-AB001-E - Servodrive - OMRON

3G3MX2-AB001-E

This OMRON drive and reference 3G3MX2-AB001-E is part of the MX2 series. Characteristics: Single phase 200/240V AC, 50/60Hz - 0.1/0.2kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€560.00

3G3MX2-AB002-E - Servodrive - OMRON

3G3MX2-AB002-E

This OMRON drive and reference 3G3MX2-AB002-E is part of the MX2 series. Characteristics: Single phase 200/240V AC, 50/60Hz - 0.2/0.4kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€840.00

3G3MX2-AB004-E - Servodrive - OMRON

3G3MX2-AB004-E

This OMRON drive and reference 3G3MX2-AB004-E is part of the MX2 series. Characteristics: Single phase 200/240V AC, 50/60Hz - 0.4/0.55kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€580.00

3G3MX2-AB007-E - Servodrive - OMRON

3G3MX2-AB007-E

This OMRON drive and reference 3G3MX2-AB007-E is part of the MX2 series. Characteristics: Single phase 200/240V AC, 50/60Hz - 0.75/1.1kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€1,400.00

3G3MX2-AB015-E - Servodrive - OMRON

3G3MX2-AB015-E

This OMRON drive and reference 3G3MX2-AB015-E is part of the MX2 series. Characteristics: Single phase 200/240V AC, 50/60Hz - 1.5/2.2kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€900.00

3G3MX2-AB022-E - Servodrive - OMRON

3G3MX2-AB022-E

This OMRON drive and reference 3G3MX2-AB022-E is part of the MX2 series. Characteristics: Single phase 200/240V AC, 50/60Hz - 2.2/3kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€1,960.00

3G3MX2-A2001-E - Servodrive - OMRON

3G3MX2-A2001-E

This OMRON drive and reference 3G3MX2-A2001-E is part of the MX2 series. Characteristics: Three phase 200/240V AC, 50/60Hz - 0.1/0.2kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€2,100.00

3G3MX2-A2002-E - Servodrive - OMRON

3G3MX2-A2002-E

This OMRON drive and reference 3G3MX2-A2002-E is part of the MX2 series. Characteristics: Three phase 200/240V AC, 50/60Hz - 0.2/0.4kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€380.00

3G3MX2-A2004-E - Servodrive - OMRON

3G3MX2-A2004-E

This OMRON drive and reference 3G3MX2-A2004-E is part of the MX2 series. Characteristics: Three phase 200/240V AC, 50/60Hz - 0.4/0.55kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€900.00

3G3MX2-A2007-E - Servodrive - OMRON

3G3MX2-A2007-E

This OMRON drive and reference 3G3MX2-A2007-E is part of the MX2 series. Characteristics: Three phase 200/240V AC, 50/60Hz - 0.75/1.1kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€1,800.00

3G3MX2-A2015-E - Servodrive - OMRON

3G3MX2-A2015-E

This OMRON drive and reference 3G3MX2-A2015-E is part of the MX2 series. Characteristics: Three phase 200/240V AC, 50/60Hz - 1.5/2.2kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€1,800.00

3G3MX2-A2022-E - Servodrive - OMRON

3G3MX2-A2022-E

This OMRON drive and reference 3G3MX2-A2022-E is part of the MX2 series. Characteristics: Three phase 200/240V AC, 50/60Hz - 2.2/3kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€1,700.00

3G3MX2-A2037-E - Servodrive - OMRON

3G3MX2-A2037-E

This OMRON drive and reference 3G3MX2-A2037-E is part of the MX2 series. Characteristics: Three phase 200/240V AC, 50/60Hz - 3.7/5.5kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€1,815.00

3G3MX2-A2055-E - Servodrive - OMRON

3G3MX2-A2055-E

This OMRON drive and reference 3G3MX2-A2055-E is part of the MX2 series. Characteristics: Three phase 200/240V AC, 50/60Hz - 5.5/7.5kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€1,600.00

3G3MX2-A2075-E - Servodrive - OMRON

3G3MX2-A2075-E

This OMRON drive and reference 3G3MX2-A2075-E is part of the MX2 series. Characteristics: Three phase 200/240V AC, 50/60Hz - 7.5/11kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€1,300.00

3G3MX2-A2110-E - Servodrive - OMRON

3G3MX2-A2110-E

This OMRON drive and reference 3G3MX2-A2110-E is part of the MX2 series. Characteristics: Three phase 200/240V AC, 50/60Hz - 11/15kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€2,500.00

3G3MX2-A2150-E - Servodrive - OMRON

3G3MX2-A2150-E

This OMRON drive and reference 3G3MX2-A2150-E is part of the MX2 series. Characteristics: Three phase 200/240V AC, 50/60Hz - 15/18.5kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€5,600.00

MKS51A015-503-50 - Servo controller - SEW

MKS51A015-503-50

This drive with reference MKS51A015-503-50 and SEW brand is a compact module from the MOVIDYN series. Features: 3x380Vac, 13.5A, 14W This SEW drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€2,800.00

MPB51A011-503-00 - Servo controller - SEW

MPB51A011-503-00

This drive with reference MPB51A011-503-00 and SEW brand is a power module from the MOVIDYN series. Features: 3x380Vac, 16A, 14kW This SEW drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€580.00