Drives

This category is made up of:
Frequency converters; Dimmers; DC Controllers; Synchronous controllers; Brushless controllers; Step by step controllers; Starters; Boards and Variable Speed Drives.

Showing 1-34 of 34 item(s)

A06B-6105-H003 - Servo Amplifier - FANUC

A06B-6105-H003

6-axis drive for F-200iB/M-6iB/ArcMate 100iB robot (or other compatible model). KUKA, ABB... Input : 200-240V 1,5kW. Output : 6x13AIncludes a 6-axis A16B-2000-0063/06C power board, and a servo control board A16B-3200-0440/04CThis A06B-6105-H003 drive is at your disposal to replace your defective hardware and has a warranty adapted to your needs.

€3,420.00

A16B-2100-0200 - Control board - FANUC

A16B-2100-0200

This FANUC reference board A16B-2100-0200 is designed to equip the FANUC A06B-6100-H002 drives. This FANUC control board is used to control the A06B-6100-H002 drive installed on FANUC RJ3 robots. This card A16B-2100-0200 is at your disposal to replace your defective equipment and has a guarantee of operation adapted to your needs.

€1,560.00

BUS21-15/30-30-001 - Servo power unit - BAUMÜLLER

BUS21-15/30-30-001

This BAUMÜLLER BUS21-15/30-30-001 servo power unit is designed for BAUMÜLLER motors of up to 15 to 30A. Series: BUS3, 21 and 20. BUS21-15/30-30-001: 15A (nominal), 30A (peak), 300 VDC- Execution of the regulation part : 001 This BAUMULLER servo power unit is at your disposal to replace your defective equipment and has a functional guarantee adapted to...

€810.00

BUS21-7.5/15-30-001 - Servo power unit - BAUMÜLLER

BUS21-7.5/15-30-001

This BAUMÜLLER BUS21-7.5/15-30-001 servo power unit is designed for BAUMÜLLER motors of up to 30A. Series: BUS3, 21 and 20. BUS21-7.5/15-30-001: 7.5A (nominal), 15A (peak), 300 VDC- Execution of the regulation part : 001 This BAUMULLER servo power unit is at your disposal to replace your defective equipment and has a functional guarantee adapted to your...

€1,120.00

BUS21-22/45-30-001 - Servo power unit - BAUMÜLLER

BUS21-22/45-30-001

This BAUMÜLLER BUS21-22/45-30-001 servo power unit is designed for BAUMÜLLER motors of up to 15 to 30A. Series: BUS3, 21 and 20. BUS21-22/45-30-001: 22A (nominal), 45A (peak), 300 VDC- Execution of the regulation part : 001 This BAUMULLER servo power unit is at your disposal to replace your defective equipment and has a functional guarantee adapted to...

€590.00

BUS21-30/60-30-001 - Servo power unit - BAUMÜLLER

BUS21-30/60-30-001

This BAUMÜLLER BUS21-30/60-30-001 servo power unit is designed for BAUMÜLLER motors of up to 15 to 30A. Series: BUS3, 21 and 20. BUS21-30/60-30-001: 30A (nominal), 60A (peak), 300 VDC- Execution of the regulation part : 001 This BAUMULLER servo power unit is at your disposal to replace your defective equipment and has a functional guarantee adapted to...

€1,120.00

BUS21-7.5/15-31-020 - Servo power unit - BAUMÜLLER

BUS21-7.5/15-31-020

This BAUMÜLLER BUS21-7.5/15-31-020 servo power unit is designed for BAUMÜLLER motors of up to 30A. Series: BUS3, 21 and 20. BUS21-7.5/15-31-020 : 7.5A (nominal), 15A (peak), 310 VDC- Execution of the regulation part : 020 This BAUMULLER servo power unit is at your disposal to replace your defective equipment and has a functional guarantee adapted to your...

€800.00

BUS21-15/30-31-020 - Servo power unit - BAUMÜLLER

BUS21-15/30-31-020

This BAUMÜLLER BUS21-15/30-31-020 servo power unit is designed for BAUMÜLLER motors of up to 15 to 30A. Series: BUS3, 21 and 20. BUS21-15/30-31-020 : 15A (nominal), 30A (peak), 310 VDC- Execution of the regulation part : 020 This BAUMULLER servo power unit is at your disposal to replace your defective equipment and has a functional guarantee adapted to...

€980.00

BUS21-15/30-31-028 - Servo power unit - BAUMÜLLER

BUS21-15/30-31-028

This BAUMÜLLER BUS21-15/30-31-028 servo power unit is designed for BAUMÜLLER motors of up to 15 to 30A. Series: BUS3, 21 and 20. BUS21-15/30-31-028 : 15A (nominal), 30A (peak), 310 VDC- Execution of the regulation part : 028 This BAUMULLER servo power unit is at your disposal to replace your defective equipment and has a functional guarantee adapted to...

€1,220.00

BUS21-15/30-30-003 - Servo power unit - BAUMÜLLER

BUS21-15/30-30-003

This BAUMÜLLER BUS21-15/30-30-003 servo power unit is designed for BAUMÜLLER motors of up to 15 to 30A. Series: BUS3, 21 and 20. BUS21-15/30-30-003 : 15A (nominal), 30A (peak), 300 VDC- Execution of the regulation part : 003 This BAUMULLER servo power unit is at your disposal to replace your defective equipment and has a functional guarantee adapted to...

€830.00

BUS21-22/45-31-020 - Servo power unit - BAUMÜLLER

BUS21-22/45-31-020

This BAUMÜLLER BUS21-22/45-31-020 servo power unit is designed for BAUMÜLLER motors of up to 15 to 30A. Series: BUS3, 21 and 20. BUS21-22/45-31-020 : 22A (nominal), 45A (peak), 310 VDC- Execution of the regulation part : 020 This BAUMULLER servo power unit is at your disposal to replace your defective equipment and has a functional guarantee adapted to...

€960.00

SDS 4021 - Servo Converter - STÖBER

SDS 4021

This variable speed drive for servo motor reference SDS 4021 and brand Stöber is a variable speed drive from the POSIDYN SDS 4000 range. SDS 4021: Three-phase 230...480V, 2A, 1kVA. This Stöber drive is available to replace your defective equipment and has an appropriate warranty. Drive tested on an engine test bench.

€1,725.00

SDS 4011 - Servo Converter - STÖBER

SDS 4011

This variable speed drive for servo motor reference SDS 4011 and brand Stöber is a variable speed drive from the POSIDYN SDS 4000 range. SDS 4011: Three-phase 230...480V, 1.5A, 1kVA. This Stöber drive is available to replace your defective equipment and has an appropriate warranty. Drive tested on an engine test bench.

€550.00

SDS 4041 - Servo Converter - STÖBER

SDS 4041

This variable speed drive for servo motor reference SDS 4041 and brand Stöber is a variable speed drive from the POSIDYN SDS 4000 range. SDS 4041: Three-phase 230...480V, 6A, 4kVA. This Stöber drive is available to replace your defective equipment and has an appropriate warranty. Drive tested on an engine test bench.

€2,310.00

SDS 4071 - Servo Converter - STÖBER

SDS 4071

This variable speed drive for servo motor reference SDS 4071 and brand Stöber is a variable speed drive from the POSIDYN SDS 4000 range. SDS 4071: Three-phase 230...480V, 10A, 7kVA. This Stöber drive is available to replace your defective equipment and has an appropriate warranty. Drive tested on an engine test bench.

€6,180.00

SDS 4101 - Servo Converter - STÖBER

SDS 4101

This variable speed drive for servo motor reference SDS 4101 and brand Stöber is a variable speed drive from the POSIDYN SDS 4000 range. SDS 4101: Three-phase 230...480V, 14A, 10kVA. This Stöber drive is available to replace your defective equipment and has an appropriate warranty. Drive tested on an engine test bench.

€3,980.00

SDS 4141 - Servo Converter - STÖBER

SDS 4141

This variable speed drive for servo motor reference SDS 4141 and brand Stöber is a variable speed drive from the POSIDYN SDS 4000 range. SDS 4141: Three-phase 230...480V, 20A, 14kVA. This Stöber drive is available to replace your defective equipment and has an appropriate warranty. Drive tested on an engine test bench.

€4,830.00

3G3MX2-AB001-E - Servodrive - OMRON

3G3MX2-AB001-E

This OMRON drive and reference 3G3MX2-AB001-E is part of the MX2 series. Characteristics: Single phase 200/240V AC, 50/60Hz - 0.1/0.2kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€560.00

3G3MX2-AB002-E - Servodrive - OMRON

3G3MX2-AB002-E

This OMRON drive and reference 3G3MX2-AB002-E is part of the MX2 series. Characteristics: Single phase 200/240V AC, 50/60Hz - 0.2/0.4kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€840.00

3G3MX2-AB004-E - Servodrive - OMRON

3G3MX2-AB004-E

This OMRON drive and reference 3G3MX2-AB004-E is part of the MX2 series. Characteristics: Single phase 200/240V AC, 50/60Hz - 0.4/0.55kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€580.00

3G3MX2-AB007-E - Servodrive - OMRON

3G3MX2-AB007-E

This OMRON drive and reference 3G3MX2-AB007-E is part of the MX2 series. Characteristics: Single phase 200/240V AC, 50/60Hz - 0.75/1.1kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€1,400.00

3G3MX2-AB015-E - Servodrive - OMRON

3G3MX2-AB015-E

This OMRON drive and reference 3G3MX2-AB015-E is part of the MX2 series. Characteristics: Single phase 200/240V AC, 50/60Hz - 1.5/2.2kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€900.00

3G3MX2-AB022-E - Servodrive - OMRON

3G3MX2-AB022-E

This OMRON drive and reference 3G3MX2-AB022-E is part of the MX2 series. Characteristics: Single phase 200/240V AC, 50/60Hz - 2.2/3kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€1,960.00

3G3MX2-A2001-E - Servodrive - OMRON

3G3MX2-A2001-E

This OMRON drive and reference 3G3MX2-A2001-E is part of the MX2 series. Characteristics: Three phase 200/240V AC, 50/60Hz - 0.1/0.2kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€2,100.00

3G3MX2-A2002-E - Servodrive - OMRON

3G3MX2-A2002-E

This OMRON drive and reference 3G3MX2-A2002-E is part of the MX2 series. Characteristics: Three phase 200/240V AC, 50/60Hz - 0.2/0.4kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€380.00

3G3MX2-A2004-E - Servodrive - OMRON

3G3MX2-A2004-E

This OMRON drive and reference 3G3MX2-A2004-E is part of the MX2 series. Characteristics: Three phase 200/240V AC, 50/60Hz - 0.4/0.55kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€900.00

3G3MX2-A2007-E - Servodrive - OMRON

3G3MX2-A2007-E

This OMRON drive and reference 3G3MX2-A2007-E is part of the MX2 series. Characteristics: Three phase 200/240V AC, 50/60Hz - 0.75/1.1kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€1,800.00

3G3MX2-A2015-E - Servodrive - OMRON

3G3MX2-A2015-E

This OMRON drive and reference 3G3MX2-A2015-E is part of the MX2 series. Characteristics: Three phase 200/240V AC, 50/60Hz - 1.5/2.2kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€1,800.00

3G3MX2-A2022-E - Servodrive - OMRON

3G3MX2-A2022-E

This OMRON drive and reference 3G3MX2-A2022-E is part of the MX2 series. Characteristics: Three phase 200/240V AC, 50/60Hz - 2.2/3kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€1,700.00

3G3MX2-A2037-E - Servodrive - OMRON

3G3MX2-A2037-E

This OMRON drive and reference 3G3MX2-A2037-E is part of the MX2 series. Characteristics: Three phase 200/240V AC, 50/60Hz - 3.7/5.5kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€1,815.00

3G3MX2-A2055-E - Servodrive - OMRON

3G3MX2-A2055-E

This OMRON drive and reference 3G3MX2-A2055-E is part of the MX2 series. Characteristics: Three phase 200/240V AC, 50/60Hz - 5.5/7.5kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€1,600.00

3G3MX2-A2075-E - Servodrive - OMRON

3G3MX2-A2075-E

This OMRON drive and reference 3G3MX2-A2075-E is part of the MX2 series. Characteristics: Three phase 200/240V AC, 50/60Hz - 7.5/11kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€1,300.00

3G3MX2-A2110-E - Servodrive - OMRON

3G3MX2-A2110-E

This OMRON drive and reference 3G3MX2-A2110-E is part of the MX2 series. Characteristics: Three phase 200/240V AC, 50/60Hz - 11/15kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€2,500.00

3G3MX2-A2150-E - Servodrive - OMRON

3G3MX2-A2150-E

This OMRON drive and reference 3G3MX2-A2150-E is part of the MX2 series. Characteristics: Three phase 200/240V AC, 50/60Hz - 15/18.5kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€5,600.00