Drives

This category is made up of:
Frequency converters; Dimmers; DC Controllers; Synchronous controllers; Brushless controllers; Step by step controllers; Starters; Boards and Variable Speed Drives.

Showing 1-36 of 43 item(s)

KDA 3.3-150-3-A00-W1 - AC Spindle Drive - INDRAMAT

KDA 3.3-150-3-A00-W1

This INDRAMAT reference mainspindle drive KDA 3.3-150-3-A00-W1 is designed for INDRAMAT 2AD and 1MB motors. KDA 3.3-150-3-A00-W1 MAINSPINDLE DRIVE, 150A, 300V, ANGLE SPEED ANALOG +/- 10V, WITHOUT AUXILIARY INPUT, WITHOUT AUXILIARY INTERFACE, AC SUPPLY VOLTAGE FOR HEAT SINK 220V/50-60 Hz This INDRAMAT drive is at your disposal to replace your defective...

€3,360.00

A06B-6102-H206 - Spindle Amplifier Module - FANUC

A06B-6102-H206

This FANUC reference spindle drive A06B-6102-H206#H520 is a Spindle Amplifier Module. Belongs to the Fanuc Alpha SPM-5.5-1 range Alpha Fanuc series type 1 : Input : 283-325V, 6.8kW, output voltage : 230V ~ rated output current : 27A This spindle amplifier module A06B-6102-H206#H520 is at your disposal to replace your defective equipment and has a...

€1,400.00

A06B-6088-H222 - Spindle Amplifier Module - FANUC

A06B-6088-H222

This FANUC reference spindle drive A06B-6088-H222#H500 is a Spindle Amplifier Module. Belongs to the Fanuc Alpha SPM-22 range Alpha Fanuc series type 1 : Input : 283-325V, 25.2kW, output voltage : 230V ~ rated output current : 95A This spindle amplifier module A06B-6088-H222#H500 is at your disposal to replace your defective equipment and has a guarantee...

€1,780.00

A06B-6102-H211 - Spindle Amplifier Module - FANUC

A06B-6102-H211

This FANUC reference spindle drive A06B-6102-H211#H520 is a Spindle Amplifier Module. Belongs to the Fanuc Alpha SPM-11-1 range Alpha Fanuc series type 1 : Input : 283-325V, 17.5kW, output voltage : 230V ~ rated output current : 48A This spindle amplifier module A06B-6102-H211#H520 is at your disposal to replace your defective equipment and has a...

€1,460.00

DKR03.1-W200 - Drive controller - INDRAMAT

DKR03.1-W200

This INDRAMAT DKR03.1-W200 reference drive controller is designed for INDRAMAT 2AD, 2AF, 1MB, LSF and LAF motors. Drive controller : 141A, Series 3, Configuration 1. 3xAC 400 to 480V, 50/ 60Hz. This INDRAMAT drive controller is at your disposal to replace your defective equipment and has a suitable guarantee. Drive tested on engine test bench.

€4,300.00

A06B-6102-H215 - Spindle Amplifier Module - FANUC

A06B-6102-H215

This FANUC reference spindle drive A06B-6102-H215#H520 is a Spindle Amplifier Module. Belongs to the Fanuc Alpha SPM-15-1 range Alpha Fanuc series type 1 : Input : 283-325V, 17.5kW, output voltage : 230V ~ rated output current : 63A This spindle amplifier module A06B-6102-H215#H520 is at your disposal to replace your defective equipment and has a...

€1,640.00

A06B-6088-H215 - Spindle Amplifier Module - FANUC

A06B-6088-H215

This FANUC reference spindle drive A06B-6088-H215#H500 is a Spindle Amplifier Module. Belongs to the Fanuc Alpha SPM-15 range Alpha Fanuc series type 1 : Input : 283-325V, 17.5kW, output voltage : 230V ~ rated output current : 63A This spindle amplifier module A06B-6088-H215#H500 is at your disposal to replace your defective equipment and has a guarantee...

€2,140.00

A06B-6102-H222 - Spindle Amplifier Module - FANUC

A06B-6102-H222

This FANUC reference spindle drive A06B-6102-H222#H520 is a Spindle Amplifier Module. Belongs to the Fanuc Alpha SPM-22-1 range Alpha Fanuc series type 1 : Input : 283-325V, 25.2kW, output voltage : 230V ~ rated output current : 95A This spindle amplifier module A06B-6102-H222#H520 is at your disposal to replace your defective equipment and has a...

€1,880.00

A06B-6088-H226 - Spindle Amplifier Module - FANUC

A06B-6088-H226

This FANUC reference spindle drive A06B-6088-H226#H500 is a Spindle Amplifier Module. Belongs to the Fanuc Alpha SPM-26 range Alpha Fanuc series type 1 : Input : 283-325V, 9.8kW, output voltage : 230V ~ rated output current : 111A This spindle amplifier module A06B-6088-H226#H500 is at your disposal to replace your defective equipment and has a guarantee...

€2,620.00

R7D-APA3H - Servodrive - OMRON

R7D-APA3H

This OMRON servodrive and reference R7D-APA3H is part of the series SMARTSTEP A.R7D-APA3H : Single phase 200V - 30W, filter R88A-FIW104This R7D-APA3H servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€310.00

R7D-APA5H - Servodrive - OMRON

R7D-APA5H

This OMRON servodrive and reference R7D-APA5H is part of the series SMARTSTEP A.R7D-APA5H : Single phase 200V - 50W, filter R88A-FIW104This R7D-APA5H servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€420.00

R7D-AP01H - Servodrive - OMRON

R7D-AP01H

This OMRON servodrive and reference R7D-AP01H is part of the series SMARTSTEP A.R7D-AP01H : Single phase 200V - 100W, filter R88A-FIW104This R7D-AP01H servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€495.00

R7D-AP02H - Servodrive - OMRON

R7D-AP02H

This OMRON servodrive and reference R7D-AP02H is part of the series SMARTSTEP A.R7D-AP02H : Single phase 200V - 200W, filter R88A-FIW104This R7D-AP02H servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€890.00

R7D-AP04H - Servodrive - OMRON

R7D-AP04H

This OMRON servodrive and reference R7D-AP04H is part of the series SMARTSTEP A.R7D-AP04H : Single phase 200V - 400W, filter R88A-FIW107This R7D-AP04H servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€455.00

R7D-AP08H - Servodrive - OMRON

R7D-AP08H

This OMRON servodrive and reference R7D-AP08H is part of the series SMARTSTEP A.R7D-AP08H : Single phase 200V - 750W, filter R88A-FIW115This R7D-AP08H servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€1,810.00

R7D-APA3L - Servodrive - OMRON

R7D-APA3L

This OMRON servodrive and reference R7D-APA3L is part of the series SMARTSTEP A.R7D-APA3L : Single phase 100/115V AC, 50/60Hz - 30WThis R7D-APA3L servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€380.00

R7D-APA5L - Servodrive - OMRON

R7D-APA5L

This OMRON servodrive and reference R7D-APA5L is part of the series SMARTSTEP A.R7D-APA5L : Single phase 100/115V AC, 50/60Hz - 50WThis R7D-APA5L servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€460.00

R7D-AP01L - Servodrive - OMRON

R7D-AP01L

This OMRON servodrive and reference R7D-AP01L is part of the series SMARTSTEP A.R7D-AP01L : Single phase 100/115V AC, 50/60Hz - 100WThis R7D-AP01L servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€580.00

R7D-AP02L - Servodrive - OMRON

R7D-AP02L

This OMRON servodrive and reference R7D-AP02L is part of the series SMARTSTEP A.R7D-AP02L : Single phase 100/115V AC, 50/60Hz - 200WThis R7D-AP02L servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€670.00

R7D-AP04L - Servodrive - OMRON

R7D-AP04L

This OMRON servodrive and reference R7D-AP04L is part of the series SMARTSTEP A.R7D-AP04L : Single phase 100/115V AC, 50/60Hz - 400WThis R7D-AP04L servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€760.00

KDA 1.1-100-300-W1-220 - AC Spindle Drive - INDRAMAT

KDA 1.1-100-300-W1-220

This INDRAMAT reference mainspindle drive KDA 1.1-100-300-W1-220 is designed for INDRAMAT 2AD and 1MB motors. KDA 1.1-100-300-W1-220 INDRAMAT AC-MAINSPINDLE DRIVE, 100A, 300V, AC SUPPLY VOLTAGE FOR HEAT SINK 220V / 50-60 Hz FORCED COOLING BY COOLANT FAN This INDRAMAT drive is at your disposal to replace your defective equipment and has a suitable guarantee.

€3,650.00

KDA 1.1-150-300-W1-220 - AC Spindle Drive - INDRAMAT

KDA 1.1-150-300-W1-220

This INDRAMAT reference mainspindle drive KDA 1.1-150-300-W1-220 is designed for INDRAMAT 2AD and 1MB motors. KDA 1.1-150-300-W1-220 INDRAMAT AC-MAINSPINDLE DRIVE, 150A, 300V, AC SUPPLY VOLTAGE FOR HEAT SINK 220V / 50-60 Hz FORCED COOLING BY COOLANT FAN This INDRAMAT drive is at your disposal to replace your defective equipment and has a suitable guarantee.

€1,900.00

KDA 1.1-150-300-W1-115 - AC Spindle Drive - INDRAMAT

KDA 1.1-150-300-W1-115

This INDRAMAT reference mainspindle drive KDA 1.1-150-300-W1-115 is designed for INDRAMAT 2AD and 1MB motors. KDA 1.1-150-300-W1-115 INDRAMAT AC-MAINSPINDLE DRIVE, 150A, 300V, AC SUPPLY VOLTAGE FOR HEAT SINK 115V / 50-60 Hz FORCED COOLING BY COOLANT FAN This INDRAMAT drive is at your disposal to replace your defective equipment and has a suitable guarantee.

€1,900.00

KDA 2.1-100-3-A00-W1 - AC Spindle Drive - INDRAMAT

KDA 2.1-100-3-A00-W1

This INDRAMAT reference mainspindle drive KDA 2.1-100-3-A00-W1 is designed for INDRAMAT 2AD and 1MB motors. KDA 3.3-150-3-A00-W1 MAINSPINDLE DRIVE, 100A, 300V, ANGLE SPEED ANALOG +/- 10V, WITHOUT AUXILIARY INPUT, WITHOUT AUXILIARY INTERFACE, 50-60 Hz This INDRAMAT drive is at your disposal to replace your defective equipment and has a suitable guarantee.

€3,600.00

KDA 2.1-150-300-A00-W1-220 - AC Spindle Drive - INDRAMAT

KDA 2.1-150-300-A00-W1-220

This INDRAMAT reference mainspindle drive KDA 2.1-150-300-A00-W1-220 is designed for INDRAMAT 2AD and 1MB motors KDA 2.1-150-300-A00-W1 MAINSPINDLE DRIVE, 150A, 300V, ANGLE SPEED ANALOG +/- 10V,WITHOUT AUXILIARY INPUT,WITHOUT AUXILIARY INTERFACE, AC SUPPLY VOLTAGE FOR HEAT SINK 220V/50-60 Hz This INDRAMAT drive is at your disposal to replace your...

€2,860.00

R7M-A10030-BS1 - Servo motor - OMRON

R7M-A10030-BS1

This OMRON R7M-A10030-BS1 servo motor is a SMARTSTEP A series motor. Characteristics: 230V, 100W, 0.87A, with brake for R7D-AP01H servo drive. This R7M-A10030-BS1 servomotor is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€570.00

R7M-A20030-S1-D - Servo motor - OMRON

R7M-A20030-S1-D

This OMRON R7M-A20030-S1-D servo motor is a SMARTSTEP A series motor. Characteristics: 230V, 200W, 2A without brake for R7D-AP02H servo drive. This R7M-A20030-S1-D servomotor is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€530.00

R7M-A75030-BS1-D - Servo motor - OMRON

R7M-A75030-BS1-D

This OMRON R7M-A75030-BS1-D servo motor is a SMARTSTEP A series motor. Characteristics: 230V, 750W, 4.4A, with brake for R7D-AP08H servo drive. This R7M-A75030-BS1-D servomotor is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,795.00

New product

R7M-A10030-S1 - Servo motor - OMRON

R7M-A10030-S1

This OMRON brand R7M-A10030-S1 servo motor is a SMARTSTEP series motor. Features: 100W 200V 0.87A for R7D-AP01H and XD-01-MN01 servo drive. This OMRON servomotor is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€440.00

A06B-6102-H226 - Spindle Amplifier Module - FANUC

A06B-6102-H226

This FANUC reference spindle drive A06B-6102-H226#H520 is a Spindle Amplifier Module. Belongs to the Fanuc Alpha SPM-26 range Alpha Fanuc series type 1 : Input : 283-325V, 29.8kW, output voltage : 230V ~ rated output current : 111A This spindle amplifier module A06B-6102-H226#H520 is at your disposal to replace your defective equipment and has a...

€2,860.00

A06B-6102-H230 - Spindle Amplifier Module - FANUC

A06B-6102-H230

This FANUC reference spindle drive A06B-6102-H230#H520 is a Spindle Amplifier Module. Belongs to the Fanuc Alpha SPM-30 range Alpha Fanuc series type 1 : Input : 283-325V, 35kW, output voltage : 230V ~ rated output current : 133A This spindle amplifier module A06B-6102-H230#H520 is at your disposal to replace your defective equipment and has a guarantee...

€1,720.00

A06B-6102-H245 - Spindle Amplifier Module - FANUC

A06B-6102-H245

This FANUC reference spindle drive A06B-6102-H226#H520 is a Spindle Amplifier Module. Belongs to the Fanuc Alpha SPM-45 range Alpha Fanuc series type 1 : Input : 283-325V, 56kW, output voltage : 230V ~ rated output current : 198A This spindle amplifier module A06B-6102-H226#H520 is at your disposal to replace your defective equipment and has a guarantee...

€5,720.00

DKR03.1-F200 - Drive controller - INDRAMAT

DKR03.1-F200

This INDRAMAT reference DKR03.1-F200 drive is a system from the DKR range. Features: 3x400/480Vac, 50/60Hz, 141A. This INDRAMAT drive is at your disposal to replace your defective equipment and has an appropriate guarantee. Drive tested on an engine test bench.

€2,850.00

DKR03.1-F100 - Drive controller - INDRAMAT

DKR03.1-F100

This INDRAMAT reference DKR03.1-F100 drive is a system from the DKR range. Features: 3x400/480Vac, 50/60Hz, 71A. This INDRAMAT drive is at your disposal to replace your defective equipment and has an appropriate guarantee. Drive tested on an engine test bench.

€1,750.00

DKR03.1-W100 - Drive controller - INDRAMAT

DKR03.1-W100

This INDRAMAT reference DKR03.1-W100 drive is a system from the DKR range. Features: 3x400/480Vac, 50/60Hz, 71A. This INDRAMAT drive is at your disposal to replace your defective equipment and has an appropriate guarantee. Drive tested on an engine test bench.

€3,200.00

DKR02.1-W200 - Drive controller - INDRAMAT

DKR02.1-W200

This INDRAMAT reference DKR02.1-W200 drive is a system from the DKR range. Features: 3x400/480Vac, 50/60Hz, 141A. This INDRAMAT drive is at your disposal to replace your defective equipment and has an appropriate guarantee. Drive tested on an engine test bench.

€1,600.00