Drives

This category is made up of:
Frequency converters; Dimmers; DC Controllers; Synchronous controllers; Brushless controllers; Step by step controllers; Starters; Boards and Variable Speed Drives.

Showing 1-36 of 61 item(s)

A06B-6102-H206 - Spindle Amplifier Module - FANUC

A06B-6102-H206

This FANUC reference spindle drive A06B-6102-H206#H520 is a Spindle Amplifier Module. Belongs to the Fanuc Alpha SPM-5.5-1 range Alpha Fanuc series type 1 : Input : 283-325V, 6.8kW, output voltage : 230V ~ rated output current : 27A This spindle amplifier module A06B-6102-H206#H520 is at your disposal to replace your defective equipment and has a...

€1,400.00

A06B-6088-H222 - Spindle Amplifier Module - FANUC

A06B-6088-H222

This FANUC reference spindle drive A06B-6088-H222#H500 is a Spindle Amplifier Module. Belongs to the Fanuc Alpha SPM-22 range Alpha Fanuc series type 1 : Input : 283-325V, 25.2kW, output voltage : 230V ~ rated output current : 95A This spindle amplifier module A06B-6088-H222#H500 is at your disposal to replace your defective equipment and has a guarantee...

€1,780.00

A06B-6102-H211 - Spindle Amplifier Module - FANUC

A06B-6102-H211

This FANUC reference spindle drive A06B-6102-H211#H520 is a Spindle Amplifier Module. Belongs to the Fanuc Alpha SPM-11-1 range Alpha Fanuc series type 1 : Input : 283-325V, 17.5kW, output voltage : 230V ~ rated output current : 48A This spindle amplifier module A06B-6102-H211#H520 is at your disposal to replace your defective equipment and has a...

€1,460.00

A06B-6102-H215 - Spindle Amplifier Module - FANUC

A06B-6102-H215

This FANUC reference spindle drive A06B-6102-H215#H520 is a Spindle Amplifier Module. Belongs to the Fanuc Alpha SPM-15-1 range Alpha Fanuc series type 1 : Input : 283-325V, 17.5kW, output voltage : 230V ~ rated output current : 63A This spindle amplifier module A06B-6102-H215#H520 is at your disposal to replace your defective equipment and has a...

€1,640.00

A06B-6088-H215 - Spindle Amplifier Module - FANUC

A06B-6088-H215

This FANUC reference spindle drive A06B-6088-H215#H500 is a Spindle Amplifier Module. Belongs to the Fanuc Alpha SPM-15 range Alpha Fanuc series type 1 : Input : 283-325V, 17.5kW, output voltage : 230V ~ rated output current : 63A This spindle amplifier module A06B-6088-H215#H500 is at your disposal to replace your defective equipment and has a guarantee...

€2,140.00

A06B-6102-H222 - Spindle Amplifier Module - FANUC

A06B-6102-H222

This FANUC reference spindle drive A06B-6102-H222#H520 is a Spindle Amplifier Module. Belongs to the Fanuc Alpha SPM-22-1 range Alpha Fanuc series type 1 : Input : 283-325V, 25.2kW, output voltage : 230V ~ rated output current : 95A This spindle amplifier module A06B-6102-H222#H520 is at your disposal to replace your defective equipment and has a...

€1,880.00

A06B-6088-H226 - Spindle Amplifier Module - FANUC

A06B-6088-H226

This FANUC reference spindle drive A06B-6088-H226#H500 is a Spindle Amplifier Module. Belongs to the Fanuc Alpha SPM-26 range Alpha Fanuc series type 1 : Input : 283-325V, 9.8kW, output voltage : 230V ~ rated output current : 111A This spindle amplifier module A06B-6088-H226#H500 is at your disposal to replace your defective equipment and has a guarantee...

€2,620.00

R7D-APA3H - Servodrive - OMRON

R7D-APA3H

This OMRON servodrive and reference R7D-APA3H is part of the series SMARTSTEP A.R7D-APA3H : Single phase 200V - 30W, filter R88A-FIW104This R7D-APA3H servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€310.00

R7D-APA5H - Servodrive - OMRON

R7D-APA5H

This OMRON servodrive and reference R7D-APA5H is part of the series SMARTSTEP A.R7D-APA5H : Single phase 200V - 50W, filter R88A-FIW104This R7D-APA5H servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€420.00

R7D-AP01H - Servodrive - OMRON

R7D-AP01H

This OMRON servodrive and reference R7D-AP01H is part of the series SMARTSTEP A.R7D-AP01H : Single phase 200V - 100W, filter R88A-FIW104This R7D-AP01H servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€495.00

R7D-AP02H - Servodrive - OMRON

R7D-AP02H

This OMRON servodrive and reference R7D-AP02H is part of the series SMARTSTEP A.R7D-AP02H : Single phase 200V - 200W, filter R88A-FIW104This R7D-AP02H servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€890.00

R7D-AP04H - Servodrive - OMRON

R7D-AP04H

This OMRON servodrive and reference R7D-AP04H is part of the series SMARTSTEP A.R7D-AP04H : Single phase 200V - 400W, filter R88A-FIW107This R7D-AP04H servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€455.00

R7D-AP08H - Servodrive - OMRON

R7D-AP08H

This OMRON servodrive and reference R7D-AP08H is part of the series SMARTSTEP A.R7D-AP08H : Single phase 200V - 750W, filter R88A-FIW115This R7D-AP08H servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€1,810.00

R7D-APA3L - Servodrive - OMRON

R7D-APA3L

This OMRON servodrive and reference R7D-APA3L is part of the series SMARTSTEP A.R7D-APA3L : Single phase 100/115V AC, 50/60Hz - 30WThis R7D-APA3L servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€380.00

R7D-APA5L - Servodrive - OMRON

R7D-APA5L

This OMRON servodrive and reference R7D-APA5L is part of the series SMARTSTEP A.R7D-APA5L : Single phase 100/115V AC, 50/60Hz - 50WThis R7D-APA5L servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€460.00

R7D-AP01L - Servodrive - OMRON

R7D-AP01L

This OMRON servodrive and reference R7D-AP01L is part of the series SMARTSTEP A.R7D-AP01L : Single phase 100/115V AC, 50/60Hz - 100WThis R7D-AP01L servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€580.00

R7D-AP02L - Servodrive - OMRON

R7D-AP02L

This OMRON servodrive and reference R7D-AP02L is part of the series SMARTSTEP A.R7D-AP02L : Single phase 100/115V AC, 50/60Hz - 200WThis R7D-AP02L servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€670.00

R7D-AP04L - Servodrive - OMRON

R7D-AP04L

This OMRON servodrive and reference R7D-AP04L is part of the series SMARTSTEP A.R7D-AP04L : Single phase 100/115V AC, 50/60Hz - 400WThis R7D-AP04L servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€760.00

ACS800-01-0016-3 - Variable speed drive -ABB

ACS800-01-0016-3

This reference speed controller ACS800-01-0016-3 and ABB brand is a drive of the ACS800-01 range. ACS800-01-0016-3 : Three-phase power supply: 380, 400 or 415V. 25A, 11kW, This ABB variable speed drive is at your disposal to replace your defective equipment and has a suitable guarantee. Speed controller tested on ABB motor.

€960.00

ACS800-01-0011-3 - Variable speed drive -ABB

ACS800-01-0011-3

This reference speed controller ACS800-01-0011-3 and ABB brand is a drive of the ACS800-01 range. ACS800-01-0011-3 : Three-phase power supply: 380, 400 or 415V. 19A, 7.5kW, This ABB variable speed drive is at your disposal to replace your defective equipment and has a suitable guarantee. Speed controller tested on ABB motor.

€790.00

R7M-A10030-BS1 - Servo motor - OMRON

R7M-A10030-BS1

This OMRON R7M-A10030-BS1 servo motor is a SMARTSTEP A series motor. Characteristics: 230V, 100W, 0.87A, with brake for R7D-AP01H servo drive. This R7M-A10030-BS1 servomotor is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€570.00

R7M-A20030-S1-D - Servo motor - OMRON

R7M-A20030-S1-D

This OMRON R7M-A20030-S1-D servo motor is a SMARTSTEP A series motor. Characteristics: 230V, 200W, 2A without brake for R7D-AP02H servo drive. This R7M-A20030-S1-D servomotor is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€530.00

R7M-A75030-BS1-D - Servo motor - OMRON

R7M-A75030-BS1-D

This OMRON R7M-A75030-BS1-D servo motor is a SMARTSTEP A series motor. Characteristics: 230V, 750W, 4.4A, with brake for R7D-AP08H servo drive. This R7M-A75030-BS1-D servomotor is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,795.00

A06B-6102-H226 - Spindle Amplifier Module - FANUC

A06B-6102-H226

This FANUC reference spindle drive A06B-6102-H226#H520 is a Spindle Amplifier Module. Belongs to the Fanuc Alpha SPM-26 range Alpha Fanuc series type 1 : Input : 283-325V, 29.8kW, output voltage : 230V ~ rated output current : 111A This spindle amplifier module A06B-6102-H226#H520 is at your disposal to replace your defective equipment and has a...

€2,860.00

A06B-6102-H230 - Spindle Amplifier Module - FANUC

A06B-6102-H230

This FANUC reference spindle drive A06B-6102-H230#H520 is a Spindle Amplifier Module. Belongs to the Fanuc Alpha SPM-30 range Alpha Fanuc series type 1 : Input : 283-325V, 35kW, output voltage : 230V ~ rated output current : 133A This spindle amplifier module A06B-6102-H230#H520 is at your disposal to replace your defective equipment and has a guarantee...

€1,720.00

A06B-6102-H245 - Spindle Amplifier Module - FANUC

A06B-6102-H245

This FANUC reference spindle drive A06B-6102-H226#H520 is a Spindle Amplifier Module. Belongs to the Fanuc Alpha SPM-45 range Alpha Fanuc series type 1 : Input : 283-325V, 56kW, output voltage : 230V ~ rated output current : 198A This spindle amplifier module A06B-6102-H226#H520 is at your disposal to replace your defective equipment and has a guarantee...

€5,720.00

DSD13M02 - Digital servoamplifier - PARKER

DSD13M02

This reference servoamplifier DSD13M02 and PARKER is a servo drive from the DIGIVEX DRIVE series. DSD13M02 : 230V single phase 50/60Hz, 2A/4A, 375W This PARKER digital servoamplifier is at your disposal to replace your defective equipment and has a suitable guarantee.

€980.00

DSD13M04 - Digital servoamplifier - PARKER

DSD13M04

This reference servoamplifier DSD13M04 and PARKER is a servo drive from the DIGIVEX DRIVE series. DSD13M04: 230V single phase 50/60Hz, 4A/8A, 750W This PARKER digital servoamplifier is at your disposal to replace your defective equipment and has a suitable guarantee.

€420.00

DSD13M07 - Digital servoamplifier - PARKER

DSD13M07

This reference servoamplifier DSD13M07 and PARKER is a servo drive from the DIGIVEX DRIVE series. DSD13M07: 230V single phase 50/60Hz, 7.5A/15A, 1500W This PARKER digital servoamplifier is at your disposal to replace your defective equipment and has a suitable guarantee.

€450.00

DSD13004 - Digital servoamplifier - PARKER

DSD13004

This reference servoamplifier DSD13004 and PARKER is a servo drive from the DIGIVEX DRIVE series. DSD13004: 230V three-phase 50/60Hz, 4A/8A, 750W This PARKER digital servoamplifier is at your disposal to replace your defective equipment and has a suitable guarantee.

€400.00

DSD13007 - Digital servoamplifier - PARKER

DSD13007

This reference servoamplifier DSD13007 and PARKER is a servo drive from the DIGIVEX DRIVE series. DSD13007: 230V three-phase 50/60Hz, 7.5A/15A, 1500W This PARKER digital servoamplifier is at your disposal to replace your defective equipment and has a suitable guarantee.

€420.00

DSD13015 - Digital servoamplifier - PARKER

DSD13015

This reference servoamplifier DSD13015 and PARKER is a servo drive from the DIGIVEX DRIVE series. DSD13015: 230V three-phase 50/60Hz, 15A/30A, 3000W This PARKER digital servoamplifier is at your disposal to replace your defective equipment and has a suitable guarantee.

€440.00

DSD13030 - Digital servoamplifier - PARKER

DSD13030

This reference servoamplifier DSD13030 and PARKER is a servo drive from the DIGIVEX DRIVE series. DSD13030: 230V three-phase 50/60Hz, 30A/60A, 6000W This PARKER digital servoamplifier is at your disposal to replace your defective equipment and has a suitable guarantee.

€440.00

DSD13060 - Digital servoamplifier - PARKER

DSD13060

This reference servoamplifier DSD13060 and PARKER is a servo drive from the DIGIVEX DRIVE series. DSD13060: 230V three-phase 50/60Hz, 60A/100A, 12000W This PARKER digital servoamplifier is at your disposal to replace your defective equipment and has a suitable guarantee.

€450.00

DSD16002 - Digital servoamplifier - PARKER

DSD16002

This reference servoamplifier DSD16002 and PARKER is a servo drive from the DIGIVEX DRIVE series. DSD16002: 400V three-phase 50/60Hz, 2A/4A, 375W This PARKER digital servoamplifier is at your disposal to replace your defective equipment and has a suitable guarantee.

€500.00

DSD16004 - Digital servoamplifier - PARKER

DSD16004

This reference servoamplifier DSD16004 and PARKER is a servo drive from the DIGIVEX DRIVE series. DSD16004: 400V three-phase 50/60Hz, 4A/8A, 1500W This PARKER digital servoamplifier is at your disposal to replace your defective equipment and has a suitable guarantee.

€520.00