Drives

This category is made up of:
Frequency converters; Dimmers; DC Controllers; Synchronous controllers; Brushless controllers; Step by step controllers; Starters; Boards and Variable Speed Drives.

Showing 1-36 of 50 item(s)

A06B-6096-H301 - Servo Amplifier Module - FANUC

A06B-6096-H301

This servo amplifier module A06B-6096-H301 and brand FANUC is a 3-axis AC drive. SVM3-12/12/12 series. Input: 283-325V, 1.85kW. - Nominal output 230V ~ L axis : 3A, M axis : 3A, N axis : 3A. With FSSB interface. This A06B-6096-H301servo amplifier module is at your disposal to replace your defective hardware and has a warranty adapted to your needs.Servo...

€2,000.00

A06B-6096-H302 - Servo Amplifier Module - FANUC

A06B-6096-H302

This servo amplifier module A06B-6096-H302 and brand FANUC is a 3-axis AC drive. SVM3-12/12/20 series. Input: 283-325V, 2.45kW. - Nominal output 230V ~ L axis : 3A, M axis : 3A, N axis : 5.9A. With FSSB interface. This A06B-6096-H302 servo amplifier module is at your disposal to replace your defective hardware and has a warranty adapted to your...

€2,600.00

A06B-6096-H303 - Servo Amplifier Module - FANUC

A06B-6096-H303

This servo amplifier module A06B-6096-H303 and brand FANUC is a 3-axis AC drive. SVM3-12/20/20 series Input:283-325V, 3.10kW. - Nominal output 230V ~ L axis : 3A, M axis : 5.9A, N axis : 5.9A. With FSSB interface. This A06B-6096-H303 servo amplifier module is at your disposal to replace your defective hardware and has a warranty adapted to your...

€3,200.00

A06B-6096-H304 - Servo Amplifier Module - FANUC

A06B-6096-H304

This servo amplifier module A06B-6096-H304 and brand FANUC is a 3-axis AC drive. SVM3-20/20/20 series Input:283-325V, 3.7kW. - Nominal output 230V ~ L axis: 5.9A, M axis: 5.9A, N axis: 5.9A. With FSSB interface. This A06B-6096-H304 servo amplifier module is at your disposal to replace your defective hardware and has a warranty adapted to your needsServo...

€2,900.00

A06B-6096-H305 - Servo Amplifier Module - FANUC

A06B-6096-H305

This servo amplifier module A06B-6096-H305 and brand FANUC is a 3-axis AC drive. SVM3-12/12/40 series Input:283-325V, 3.7kW. - Nominal output 230V ~ L axis: 3A, M axis: 3A, N axis: 12.5A. With FSSB interface. This A06B-6096-H305 servo amplifier module is at your disposal to replace your defective hardware and has a warranty adapted to your needsServo...

€2,550.00

A06B-6096-H306 - Servo Amplifier Module - FANUC

A06B-6096-H306

This servo amplifier module A06B-6096-H306 and brand FANUC is a 3-axis AC drive. SVM3-12/20/40 series Input:283-325V, 3.7kW. - Nominal output 230V ~ L axis: 3A, M axis: 5.9A, N axis: 12.5A. With FSSB interface. This A06B-6096-H306 servo amplifier module is at your disposal to replace your defective hardware and has a warranty adapted to your needsServo...

€2,700.00

A06B-6096-H307 - Servo Amplifier Module - FANUC

A06B-6096-H307

This servo amplifier module A06B-6096-H307 and brand FANUC is a 3-axis AC drive. SVM3-20/20/40 series Input:283-325V, 4.35kW. - Nominal output 230V ~ L axis: 5.9A, M axis: 5.9A, N axis: 12.5A. With FSSB interface. This A06B-6096-H307 servo amplifier module is at your disposal to replace your defective hardware and has a warranty adapted to your...

€3,340.00

A06B-6079-H301 - Servo Amplifier Module - FANUC

A06B-6079-H301

This servo amplifier module A06B-6079-H301 and brand FANUC is a 3-axis AC drive. SVM3-12/12/12 series Input:283-325V, 1.85kW. - Nominal output 230V ~ L axis: 3A, M axis: 3A, N axis: 3A. With Type A interface. This A06B-6079-H301 servo amplifier module is at your disposal to replace your defective hardware and has a warranty adapted to your needsServo...

€1,890.00

A06B-6079-H302 - Servo Amplifier Module - FANUC

A06B-6079-H302

This servo amplifier module A06B-6079-H302 and brand FANUC is a 3-axis AC drive. SVM3-12/12/20 series Input:283-325V, 1.85kW. - Nominal output 230V ~ L axis: 3A, M axis: 3A, N axis: 5.9A. With Type A interface. This A06B-6079-H302 servo amplifier module is at your disposal to replace your defective hardware and has a warranty adapted to your needsServo...

€2,000.00

A06B-6079-H303 - Servo Amplifier Module - FANUC

A06B-6079-H303

This servo amplifier module A06B-6079-H303 and brand FANUC is a 3-axis AC drive. SVM3-12/20/20 series Input:283-325V, 3.1kW. - Nominal output 230V ~ L axis: 3A, M axis: 5.9A, N axis: 5.9A. With Type A interface. This A06B-6079-H303 servo amplifier module is at your disposal to replace your defective hardware and has a warranty adapted to your needsServo...

€2,050.00

A06B-6079-H304 - Servo Amplifier Module - FANUC

A06B-6079-H304

This servo amplifier module A06B-6079-H304 and brand FANUC is a 3-axis AC drive. SVM3-20/20/20 series Input:283-325V, 3.7kW. - Nominal output 230V ~ L axis: 5.9A, M axis: 5.9A, N axis: 5.9A. With Type A interface. This A06B-6079-H304 servo amplifier module is at your disposal to replace your defective hardware and has a warranty adapted to your...

€1,900.00

R7D-APA3H - Servodrive - OMRON

R7D-APA3H

This OMRON servodrive and reference R7D-APA3H is part of the series SMARTSTEP A.R7D-APA3H : Single phase 200V - 30W, filter R88A-FIW104This R7D-APA3H servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€310.00

R7D-APA5H - Servodrive - OMRON

R7D-APA5H

This OMRON servodrive and reference R7D-APA5H is part of the series SMARTSTEP A.R7D-APA5H : Single phase 200V - 50W, filter R88A-FIW104This R7D-APA5H servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€420.00

R7D-AP01H - Servodrive - OMRON

R7D-AP01H

This OMRON servodrive and reference R7D-AP01H is part of the series SMARTSTEP A.R7D-AP01H : Single phase 200V - 100W, filter R88A-FIW104This R7D-AP01H servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€495.00

R7D-AP02H - Servodrive - OMRON

R7D-AP02H

This OMRON servodrive and reference R7D-AP02H is part of the series SMARTSTEP A.R7D-AP02H : Single phase 200V - 200W, filter R88A-FIW104This R7D-AP02H servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€890.00

R7D-AP04H - Servodrive - OMRON

R7D-AP04H

This OMRON servodrive and reference R7D-AP04H is part of the series SMARTSTEP A.R7D-AP04H : Single phase 200V - 400W, filter R88A-FIW107This R7D-AP04H servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€455.00

R7D-AP08H - Servodrive - OMRON

R7D-AP08H

This OMRON servodrive and reference R7D-AP08H is part of the series SMARTSTEP A.R7D-AP08H : Single phase 200V - 750W, filter R88A-FIW115This R7D-AP08H servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€1,810.00

R7D-APA3L - Servodrive - OMRON

R7D-APA3L

This OMRON servodrive and reference R7D-APA3L is part of the series SMARTSTEP A.R7D-APA3L : Single phase 100/115V AC, 50/60Hz - 30WThis R7D-APA3L servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€380.00

R7D-APA5L - Servodrive - OMRON

R7D-APA5L

This OMRON servodrive and reference R7D-APA5L is part of the series SMARTSTEP A.R7D-APA5L : Single phase 100/115V AC, 50/60Hz - 50WThis R7D-APA5L servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€460.00

R7D-AP01L - Servodrive - OMRON

R7D-AP01L

This OMRON servodrive and reference R7D-AP01L is part of the series SMARTSTEP A.R7D-AP01L : Single phase 100/115V AC, 50/60Hz - 100WThis R7D-AP01L servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€580.00

R7D-AP02L - Servodrive - OMRON

R7D-AP02L

This OMRON servodrive and reference R7D-AP02L is part of the series SMARTSTEP A.R7D-AP02L : Single phase 100/115V AC, 50/60Hz - 200WThis R7D-AP02L servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€670.00

R7D-AP04L - Servodrive - OMRON

R7D-AP04L

This OMRON servodrive and reference R7D-AP04L is part of the series SMARTSTEP A.R7D-AP04L : Single phase 100/115V AC, 50/60Hz - 400WThis R7D-AP04L servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€760.00

R7M-A10030-BS1 - Servo motor - OMRON

R7M-A10030-BS1

This OMRON R7M-A10030-BS1 servo motor is a SMARTSTEP A series motor. Characteristics: 230V, 100W, 0.87A, with brake for R7D-AP01H servo drive. This R7M-A10030-BS1 servomotor is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€570.00

R7M-A20030-S1-D - Servo motor - OMRON

R7M-A20030-S1-D

This OMRON R7M-A20030-S1-D servo motor is a SMARTSTEP A series motor. Characteristics: 230V, 200W, 2A without brake for R7D-AP02H servo drive. This R7M-A20030-S1-D servomotor is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€530.00

R7M-A75030-BS1-D - Servo motor - OMRON

R7M-A75030-BS1-D

This OMRON R7M-A75030-BS1-D servo motor is a SMARTSTEP A series motor. Characteristics: 230V, 750W, 4.4A, with brake for R7D-AP08H servo drive. This R7M-A75030-BS1-D servomotor is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,795.00

New product

R7M-A10030-S1 - Servo motor - OMRON

R7M-A10030-S1

This OMRON brand R7M-A10030-S1 servo motor is a SMARTSTEP series motor. Features: 100W 200V 0.87A for R7D-AP01H and XD-01-MN01 servo drive. This OMRON servomotor is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€440.00

DST1201 - Variable speed drive - CONTROL TECHNIQUES

DST1201

This servo motor reference DST1201 and Control Techniques brand is a drive from the DIGITAX ST range. DST1201: Single phase 200/240V, 1.1A. Three-phase 200/240V, 1.7A This Control techniques drive is at your disposal to replace your defective equipment and have an appropriate guarantee. Drive tested on an engine test bench.

€1,760.00

DST1202 - Variable speed drive - CONTROL TECHNIQUES

DST1202

This servo motor reference DST1202 and Control Techniques brand is a drive from the DIGITAX ST range. DST1202: Single phase 200/240V, 2.4A. Three-phase 200/240V, 3.8A This Control techniques drive is at your disposal to replace your defective equipment and have an appropriate guarantee. Drive tested on an engine test bench.

€3,600.00

DST1203 - Variable speed drive - CONTROL TECHNIQUES

DST1203

This servo motor reference DST1203 and Control Techniques brand is a drive from the DIGITAX ST range. DST1203: Single phase 200/240V, 2.9A. Three-phase 200/240V, 5.4A This Control techniques drive is at your disposal to replace your defective equipment and have an appropriate guarantee. Drive tested on an engine test bench.

€1,990.00

DST1204 - Variable speed drive - CONTROL TECHNIQUES

DST1204

This servo motor reference DST1204 and Control Techniques brand is a drive from the DIGITAX ST range. DST1204: Single phase 200/240V, 4.7A. Three-phase 200/240V, 7.6A This Control techniques drive is at your disposal to replace your defective equipment and have an appropriate guarantee. Drive tested on an engine test bench.

€4,140.00

DST1401 - Variable speed drive - CONTROL TECHNIQUES

DST1401

This servo motor reference DST1401 and Control Techniques brand is a drive from the DIGITAX ST range. DST1401: Triphasé 380/480V, 1.5A. This Control techniques drive is at your disposal to replace your defective equipment and have an appropriate guarantee. Drive tested on an engine test bench.

€2,190.00

DST1402 - Variable speed drive - CONTROL TECHNIQUES

DST1402

This servo motor reference DST1402 and Control Techniques brand is a drive from the DIGITAX ST range. DST1402: Triphasé 380/480V, 2.7A. This Control techniques drive is at your disposal to replace your defective equipment and have an appropriate guarantee. Drive tested on an engine test bench.

€2,860.00

DST1403 - Variable speed drive - CONTROL TECHNIQUES

DST1403

This servo motor reference DST1403 and Control Techniques brand is a drive from the DIGITAX ST range. DST1403: Triphasé 380/480V, 4A. This Control techniques drive is at your disposal to replace your defective equipment and have an appropriate guarantee. Drive tested on an engine test bench.

€1,510.00

DST1404 - Variable speed drive - CONTROL TECHNIQUES

DST1404

This servo motor reference DST1404 and Control Techniques brand is a drive from the DIGITAX ST range. DST1404: Triphasé 380/480V, 5.9A. This Control techniques drive is at your disposal to replace your defective equipment and have an appropriate guarantee. Drive tested on an engine test bench.

€1,950.00

DST1405 - Variable speed drive - CONTROL TECHNIQUES

DST1405

This servo motor reference DST1405 and Control Techniques brand is a drive from the DIGITAX ST range. DST1405: Triphasé 380/480V, 8A. This Control techniques drive is at your disposal to replace your defective equipment and have an appropriate guarantee. Drive tested on an engine test bench.

€2,890.00

3RW4445-6BC44 - Soft starters - SIEMENS

3RW4445-6BC44

This SIEMENS soft starter bears the reference 3RW4445-6BC44. It corresponds to the SIEMENS - SIRIUS 3RW range. SIRIUS soft starters Values for 400 V, +40°C standard: 313 A, 160 kW Root of 3: 542 A, 315 kW 200-460 V AC, 230 V AC screw terminals !!! End of life product!! Successor is SIRIUS 3RW5, Preferred successor: >>3RW5545-6HA14<< SIEMENS...

€4,300.00