Catalog

Showing 1-36 of 68 item(s)

3HAB9271-1/01B - Dummy box unit - ABB

3HAB9271-1/01B

ABB reference dummy module 3HAB9271-1/01B for Robot IRB 2400 series. Dummy module for S4C rack, ABB description: DUMMY DRIVE MODULE SYSTEM This ABB dummy module can also be distributed under the Atlas Copco brand. It is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€105.00

3HAB8101-2/04B - DSQC345B - Rectifier - ABB

3HAB8101-2/04B

ABB reference rectifier 3HAB8101-2/04B (referenced also: DSQC345B) for robot of the IRB2400 range. Rectifier for S4C rack, ABB description: RECTIFIER DC1 This ABB rectifier can also be distributed under the Atlas Copco brand. It is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€940.00

3HAB8101-6/07B - DSQC346B - Drive Controller- ABB

3HAB8101-6/07B

ABB reference drive 3HAB8101-6/07B (referenced also: DSQC346B) for robot of the IRB2400 range. Drive for S4C rack, ABB description : DRIVE UNIT ABB This ABB drive can also be distributed under the Atlas Copco brand. It is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€990.00

3HAB8101-11/06B - DSQC346E - Servo Drive -ABB

3HAB8101-11/06B

ABB reference 3HAB8101-11/06B (referenced also as DSQC346E) for Robot IRB2400 series. Drive for S4C rack, ABB description: DRIVE UNIT This ABB drive can also be distributed under the Atlas Copco brand. It is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,360.00

3HAB8859-1/01B - Connecting strip - ABB

3HAB8859-1/01B

ABB bus busbar reference 3HAB8859-1/01B for IRB 2400 range robot. Terminal strip for S4C rack. ABB description: Power supply bar This ABB is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€25.00

On sale!

S30A-4011CA - Laser Scanner - SICK

S30A-4011CA

This S3000 series laser scanner has four protection fields and four servo fields that are freely programmable using your SICK software. You can therefore configure your laser scanner according to the conditions of your installation. This SICK S30A-4011CA scanner is at your disposal to replace your defective equipment.

€2,585.00

S30A-4011BA - Laser Scanner - SICK

S30A-4011BA

This S3000 Series safety laser scanner features 1 protective field set and four servo fields that are freely programmable using your SICK software. You can therefore configure your laser scanner according to the conditions of your installation. Protective Field range : 4 meters This SICK S30A-4011BA scanner is at your disposal to replace your defective...

€2,220.00

S30A-7011CA - Laser Scanner - SICK

S30A-7011CA

This S3000 series safety laser scanner features 4 protective field sets and 12 control fields that are freely programmable using your SICK software. You can therefore configure your laser scanner according to the conditions of your installation. Protective Field range : 7 m. This SICK S30A-7011CA scanner is at your disposal to replace your defective...

€715.00

S30A-6011EA - Laser Scanner - SICK

S30A-6011EA

This safety laser scanner can only be used in combination with the EFI system group, eg. with a Flexi Soft safety control system or another S300 or S3000 safety laser scanner. Range: 5.5 m This SICK S30A-6011EA scanner is at your disposal to replace your defective equipment.

€2,560.00

S30A-7011EA - Laser Scanner - SICK

S30A-7011EA

This S3000 Series safety laser scanner features 1 protective field set and 64 servo fields that are freely programmable using your SICK software. You can therefore configure your laser scanner according to the conditions of your installation. Protective Field range : 7 meters This SICK S30A-7011EA scanner is at your disposal to replace your defective...

€890.00

MR-JE-10A - Servo Amplifier - MITSUBISHI

MR-JE-10A

This MITSUBISHI drive, reference MR-JE-10A is an AC Servo drive. It belongs to the MELSERVO-JE Series range. Mitsubishi AC 1 or 3 phase 200/240V, 1.1A dimmer fo mitsubishi servo motor This MR-JE-10A drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€480.00

MR-JE-20A - Servo Amplifier - MITSUBISHI

MR-JE-20A

This MITSUBISHI drive, reference MR-JE-20A is an AC Servo drive. It belongs to the MELSERVO-JE Series range. Mitsubishi AC 1 or 3 phase 200/240V, 1.5A dimmer fo mitsubishi servo motor This MR-JE-20A drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€350.00

MR-JE-40A - Servo Amplifier - MITSUBISHI

MR-JE-40A

This MITSUBISHI drive, reference MR-JE-40A is an AC Servo drive. It belongs to the MELSERVO-JE Series range. Mitsubishi AC 1 or 3 phase 200/240V, 2.8A dimmer fo mitsubishi servo motor This MR-JE-40A drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€364.00

MR-JE-70A - Servo Amplifier - MITSUBISHI

MR-JE-70A

This MITSUBISHI drive, reference MR-JE-70A is an AC Servo drive. It belongs to the MELSERVO-JE Series range. Mitsubishi AC 1 or 3 phase 200/240V, 5.8A dimmer fo mitsubishi servo motor This MR-JE-70A drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€510.00

MR-JE-100A - Servo Amplifier - MITSUBISHI

MR-JE-100A

This MITSUBISHI drive, reference MR-JE-100A is an AC Servo drive. It belongs to the MELSERVO-JE Series range. Mitsubishi AC 3 phase 200/240V, 6A dimmer fo mitsubishi servo motor This MR-JE-100A drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€790.00

MR-JE-200A - Servo Amplifier - MITSUBISHI

MR-JE-200A

This MITSUBISHI drive, reference MR-JE-200A is an AC Servo drive. It belongs to the MELSERVO-JE Series range. Mitsubishi AC 3 phase 200/240V, 11A dimmer fo mitsubishi servo motor This MR-JE-200A drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€660.00

MR-JE-300A - Servo Amplifier - MITSUBISHI

MR-JE-300A

This MITSUBISHI drive, reference MR-JE-300A is an AC Servo drive. It belongs to the MELSERVO-JE Series range. Mitsubishi AC 3 phase 200/240V, 11A dimmer fo mitsubishi servo motor This MR-JE-300A drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,645.00

PNOZ m1p - Security module - PILZ

PNOZ m1p

This PNOZ m1p module from the PNOZmulti range is a basic device. Features: 20 inputs, 7 outputs, RS232. This PILZ brand module is at your disposal to replace your defective equipment. Reference : 773100.

€195.00

PNOZ ml2p - Security module - PILZ

PNOZ ml2p

This PNOZ ml2p module from the PNOZmulti range is a link module. Features: for connecting up to 4 PDP67 decentralized modules to a base device This PILZ brand module is at your disposal to replace your defective equipment. Reference : 773602.

€115.00

PNOZ X2P - Security module - PILZ

PNOZ X2P

This PNOZ X2P module from the PNOZmulti range is an emergency stop relay module. Features: 48-240 VAC | 48-240 VDC | Screw terminals This PILZ brand module is at your disposal to replace your defective equipment. Reference: 777303.

€70.00

PNOZ m0p - Security module - PILZ

PNOZ m0p

This PNOZ m0p module from the PNOZmulti range is a basic device. Features: 20 inputs, 7 outputs, RS232. This PILZ brand module is at your disposal to replace your defective equipment. Reference : 773110.

€310.00

PNOZ m0p ETH - Security module - PILZ

PNOZ m0p ETH

This PNOZ m0p ETH module from the PNOZmulti range is a basic device. Features: 20 inputs, 7 outputs, ETHERNET. This PILZ brand module is at your disposal to replace your defective equipment. Reference : 773113.

€125.00

PNOZ m1p ETH - Security module - PILZ

PNOZ m1p ETH

This PNOZ m1p ETH module from the PNOZmulti range is a basic device. Features: 20 inputs, 7 outputs, ETHERNET. This PILZ brand module is at your disposal to replace your defective equipment. Reference : 773103.

€405.00

PNOZ m2p - Security module - PILZ

PNOZ m2p

This PNOZ m2p module from the PNOZmulti range is a basic device. Features: 20 inputs, 7 outputs, RS232. This PILZ brand module is at your disposal to replace your defective equipment. Reference : 773120.

€1,245.00

PNOZ m2p ETH - Security module - PILZ

PNOZ m2p ETH

This PNOZ m2p ETH module from the PNOZmulti range is a basic device. Features: 20 inputs, 7 outputs, ETHERNET. This PILZ brand module is at your disposal to replace your defective equipment. Reference : 773123.

€3,920.00

PNOZ m3p - Security module - PILZ

PNOZ m3p

This PNOZ m3p module from the PNOZmulti range is a basic device. Features: 20 inputs, 7 outputs, ETHERNET. This PILZ brand module is at your disposal to replace your defective equipment. Reference : 773125.

€550.00

PNOZ m3p ETH - Security module - PILZ

PNOZ m3p ETH

This PNOZ m3p ETH module from the PNOZmulti range is a basic device. Features: 20 inputs, 7 outputs, ETHERNET. This PILZ brand module is at your disposal to replace your defective equipment. Reference : 773126.

€550.00

PNOZ ma1p - Expansion module - PILZ

PNOZ ma1p

This PNOZ ma1p module from the PNOZmulti range is an expansion module. Features: 2 analog inputs. This PILZ brand module is at your disposal to replace your defective equipment. Reference: 773812.

€490.00

PNOZ mc0p - Expansion module - PILZ

PNOZ mc0p

This PNOZ mc0p module from the PNOZmulti range is an expansion module. Features: Power supply for supply voltage to fieldbus modules. This PILZ brand module is at your disposal to replace your defective equipment. Reference: 773720.

€90.00

PNOZ mc1p - Expansion module - PILZ

PNOZ mc1p

This PNOZ mc1p module from the PNOZmulti range is an output module. Features: 16 outputs for standard applications. This PILZ brand module is at your disposal to replace your defective equipment. Reference: 773720.

€140.00

PNOZ mc2.1p - Expansion module - PILZ

PNOZ mc2.1p

This PNOZ mc2.1p module from the PNOZmulti range is a bus module. Features: Fieldbus module, EtherCAT This PILZ brand module is at your disposal to replace your defective equipment. Reference: 773713.

€1,400.00

PNOZ mc2p - Expansion module - PILZ

PNOZ mc2p

This PNOZ mc2p module from the PNOZmulti range is a bus module. Features: Fieldbus module, EtherCAT This PILZ brand module is at your disposal to replace your defective equipment. Reference: 773710.

€320.00

PNOZ mc3p - Expansion module - PILZ

PNOZ mc3p

This PNOZ mc3p module from the PNOZmulti range is a bus module. Features: Fieldbus module, PROFIBUS DP This PILZ brand module is at your disposal to replace your defective equipment. Reference: 773732.

€45.00

PNOZ mc4p - Expansion module - PILZ

PNOZ mc4p

This PNOZ mc4p module from the PNOZmulti range is a bus module. Features: Fieldbus module, DeviceNet. This PILZ brand module is at your disposal to replace your defective equipment. Reference: 773711.

€175.00

PNOZ mc5.1p - Expansion module - PILZ

PNOZ mc5.1p

This PNOZ mc5.1p module from the PNOZmulti range is a bus module. Features: Fieldbus module, fiber optic INTERBUS. This PILZ brand module is at your disposal to replace your defective equipment. Reference: 773728.

€280.00

PNOZ mc5p - Expansion module - PILZ

PNOZ mc5p

This PNOZ mc5p module from the PNOZmulti range is a bus module. Features: Fieldbus module, INTERBUS. This PILZ brand module is at your disposal to replace your defective equipment. Reference: 773728.

€75.00