Catalog

C200H-AD002 - Input Module - OMRON

C200H-AD002

This OMRON and C200H-AD002 brand input module belongs to the SYSMAC range. Input module: 8 analog inputs 12 bits. 1-5VCC / 4-20mA This C200H-AD002 input module is at your disposal to replace your defective hardware and has a warranty adapted to your needs.

€250.00

C200H-IM212 - Input Module - OMRON

C200H-IM212

This OMRON and C200H-IM212 brand input module belongs to the SYSMAC range. Input module: 24 VAC / VDC, 16 inputs This input module C200H-IM212 is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€115.00

G730-VID16-B - I/O Connectors - OMRON

G730-VID16-B

This connector OMRON and reference G730-VID16-B belongs to the range SYSMAC. Input module: 16 NPN 24VDC inputs. Communication speed: 187.5 kbps. This G730-VID16-B connector is at your disposal to replace your defective hardware and has a warranty adapted to your needs.

€160.00

G730-VOD16-B - I/O Connectors - OMRON

G730-VOD16-B

This connector OMRON and reference G730-VOD16-B belongs to the range SYSMAC. Input module: 16 NPN 24VDC outputs. Communication speed: 187.5 kbps. This G730-VOD16-B connector is at your disposal to replace your defective hardware and has a warranty adapted to your needs.

€160.00

A16B-1212-0100-01 - Power Unit - FANUC

A16B-1212-0100-01

This FANUC power supply A16B-1212-0100-01 is at your disposal. Fanuc Series 0-C, used for 0MC, 0TC, 0TTC, 0P4C and OPC and 0-GC. This Fanuc power supply A16B-1212-0100-01 comes with a warranty. Refurbished and fully loaded power supply (time test) on FANUC bench.

€540.00

BSM90N-175AA - Servo Motor brushless - BALDOR

BSM90N-175AA

This reference motor BSM90N-175AA and brand BALDOR is a Brushless motor AC.Gamme C series TORQ CONT STALL: 6 NM, CUR CONT STALL / AT RMS: 8.07, POWER: 0.53kW, RATED SPEED / RPM: 4000, RATED BUS VOLTS: 300, PEAK CUR / AT RMS: 29.05, MAX MECH SPEED 6000 This BALDOR Engine is at your disposal to replace your equipment and has a guarantee adapted to your needs

€1,060.00

C200H-AD003 - Input Module - OMRON

C200H-AD003

This OMRON and C200H-AD003 brand input module belongs to the SYSMAC range. Input module: 8 analog inputs 12 bits. 1-5VCC / 4-20mA This C200H-AD003 input module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€295.00

JZNC-NIF02-1 - I/O Interface board - YASKAWA

JZNC-NIF02-1

This JZNC-NIF02-1 and YASKAWA interface I/O board is an NX100 robot control unit interface board. Robot I/F unit, associated with a CPS-420F power supply and CPU JZNC-NRK01. This JZNC-NIF02-1 YASKAWA interface board is available to replace your defective equipment and has a guarantee adapted to your needs.

€1,875.00

CPS-420F - Control power supply - YASKAWA

CPS-420F

This YASKAWA control ower Supply and CPS-420F reference is used for the MOTOMAN NX100 controller. NX100 compatible with EPX2800, EPX1250 and EPX2050. This CPS-420F power supply is at your disposal to replace your defective equipment and has a guarantee of operation adapted to your needs.

€1,110.00

C200H-AD001 - Input Module - OMRON

C200H-AD001

This OMRON and C200H-AD001 brand input module belongs to the SYSMAC range. Input module: 4 to 20 mA, 1 to 5/0 to 10 V (switchable); 4 entries; 12 bits. This C200H-AD001 input module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€135.00