Catalog

Showing 1-36 of 107 item(s)

On sale!

S30A-4011CA - Laser Scanner - SICK

S30A-4011CA

This S3000 series laser scanner has four protection fields and four servo fields that are freely programmable using your SICK software. You can therefore configure your laser scanner according to the conditions of your installation. This SICK S30A-4011CA scanner is at your disposal to replace your defective equipment.

€2,585.00

A06B-6088-H326 - Spindle Amplifier Module - FANUC

A06B-6088-H326

This FANUC spindle drive, reference A06B-6088-H326#H500 is a Spindle Amplifier Module. Belongs to Fanuc Alpha SPM-26 range. Alpha Fanuc series type 1 : Input : 283-325V, 29.8kW, output voltage : 230V ~ rated output current : 111A This A06B-6088-H326#H500 is at your disposal to replace your defective hardware and has a warranty adapted to your needs.

€4,180.00

S30A-4011BA - Laser Scanner - SICK

S30A-4011BA

This S3000 Series safety laser scanner features 1 protective field set and four servo fields that are freely programmable using your SICK software. You can therefore configure your laser scanner according to the conditions of your installation. Protective Field range : 4 meters This SICK S30A-4011BA scanner is at your disposal to replace your defective...

€2,220.00

S30A-7011CA - Laser Scanner - SICK

S30A-7011CA

This S3000 series safety laser scanner features 4 protective field sets and 12 control fields that are freely programmable using your SICK software. You can therefore configure your laser scanner according to the conditions of your installation. Protective Field range : 7 m. This SICK S30A-7011CA scanner is at your disposal to replace your defective...

€715.00

S30A-6011EA - Laser Scanner - SICK

S30A-6011EA

This safety laser scanner can only be used in combination with the EFI system group, eg. with a Flexi Soft safety control system or another S300 or S3000 safety laser scanner. Range: 5.5 m This SICK S30A-6011EA scanner is at your disposal to replace your defective equipment.

€2,560.00

S30A-7011EA - Laser Scanner - SICK

S30A-7011EA

This S3000 Series safety laser scanner features 1 protective field set and 64 servo fields that are freely programmable using your SICK software. You can therefore configure your laser scanner according to the conditions of your installation. Protective Field range : 7 meters This SICK S30A-7011EA scanner is at your disposal to replace your defective...

€890.00

3G3MX2-AB001-E - Servodrive - OMRON

3G3MX2-AB001-E

This OMRON drive and reference 3G3MX2-AB001-E is part of the MX2 series. Characteristics: Single phase 200/240V AC, 50/60Hz - 0.1/0.2kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€560.00

3G3MX2-AB002-E - Servodrive - OMRON

3G3MX2-AB002-E

This OMRON drive and reference 3G3MX2-AB002-E is part of the MX2 series. Characteristics: Single phase 200/240V AC, 50/60Hz - 0.2/0.4kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€840.00

3G3MX2-AB004-E - Servodrive - OMRON

3G3MX2-AB004-E

This OMRON drive and reference 3G3MX2-AB004-E is part of the MX2 series. Characteristics: Single phase 200/240V AC, 50/60Hz - 0.4/0.55kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€580.00

3G3MX2-AB007-E - Servodrive - OMRON

3G3MX2-AB007-E

This OMRON drive and reference 3G3MX2-AB007-E is part of the MX2 series. Characteristics: Single phase 200/240V AC, 50/60Hz - 0.75/1.1kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€1,400.00

3G3MX2-AB015-E - Servodrive - OMRON

3G3MX2-AB015-E

This OMRON drive and reference 3G3MX2-AB015-E is part of the MX2 series. Characteristics: Single phase 200/240V AC, 50/60Hz - 1.5/2.2kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€900.00

3G3MX2-AB022-E - Servodrive - OMRON

3G3MX2-AB022-E

This OMRON drive and reference 3G3MX2-AB022-E is part of the MX2 series. Characteristics: Single phase 200/240V AC, 50/60Hz - 2.2/3kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€1,960.00

3G3MX2-A2001-E - Servodrive - OMRON

3G3MX2-A2001-E

This OMRON drive and reference 3G3MX2-A2001-E is part of the MX2 series. Characteristics: Three phase 200/240V AC, 50/60Hz - 0.1/0.2kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€2,100.00

3G3MX2-A2002-E - Servodrive - OMRON

3G3MX2-A2002-E

This OMRON drive and reference 3G3MX2-A2002-E is part of the MX2 series. Characteristics: Three phase 200/240V AC, 50/60Hz - 0.2/0.4kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€380.00

3G3MX2-A2004-E - Servodrive - OMRON

3G3MX2-A2004-E

This OMRON drive and reference 3G3MX2-A2004-E is part of the MX2 series. Characteristics: Three phase 200/240V AC, 50/60Hz - 0.4/0.55kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€900.00

3G3MX2-A2007-E - Servodrive - OMRON

3G3MX2-A2007-E

This OMRON drive and reference 3G3MX2-A2007-E is part of the MX2 series. Characteristics: Three phase 200/240V AC, 50/60Hz - 0.75/1.1kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€1,800.00

3G3MX2-A2015-E - Servodrive - OMRON

3G3MX2-A2015-E

This OMRON drive and reference 3G3MX2-A2015-E is part of the MX2 series. Characteristics: Three phase 200/240V AC, 50/60Hz - 1.5/2.2kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€1,800.00

3G3MX2-A2022-E - Servodrive - OMRON

3G3MX2-A2022-E

This OMRON drive and reference 3G3MX2-A2022-E is part of the MX2 series. Characteristics: Three phase 200/240V AC, 50/60Hz - 2.2/3kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€1,700.00

3G3MX2-A2037-E - Servodrive - OMRON

3G3MX2-A2037-E

This OMRON drive and reference 3G3MX2-A2037-E is part of the MX2 series. Characteristics: Three phase 200/240V AC, 50/60Hz - 3.7/5.5kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€1,815.00

3G3MX2-A2055-E - Servodrive - OMRON

3G3MX2-A2055-E

This OMRON drive and reference 3G3MX2-A2055-E is part of the MX2 series. Characteristics: Three phase 200/240V AC, 50/60Hz - 5.5/7.5kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€1,600.00

3G3MX2-A2075-E - Servodrive - OMRON

3G3MX2-A2075-E

This OMRON drive and reference 3G3MX2-A2075-E is part of the MX2 series. Characteristics: Three phase 200/240V AC, 50/60Hz - 7.5/11kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€1,300.00

3G3MX2-A2110-E - Servodrive - OMRON

3G3MX2-A2110-E

This OMRON drive and reference 3G3MX2-A2110-E is part of the MX2 series. Characteristics: Three phase 200/240V AC, 50/60Hz - 11/15kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€2,500.00

3G3MX2-A2150-E - Servodrive - OMRON

3G3MX2-A2150-E

This OMRON drive and reference 3G3MX2-A2150-E is part of the MX2 series. Characteristics: Three phase 200/240V AC, 50/60Hz - 15/18.5kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€5,600.00

MQAF01 - PLC Module - MITSUBISHI

MQAF01

MITSUBISHI PLC reference MQAF01 . MELSEC-Q series. Master Module. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€930.00

Q61P-A1 - Power supply - MITSUBISHI

Q61P-A1

MITSUBISHI Power supply reference Q61P-A1. MELSEC-Q series. Features: 100-120VAC -> 5-24VDC This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€70.00

Q61P-A2 - Power supply - MITSUBISHI

Q61P-A2

MITSUBISHI Power supply reference Q61P-A2 . MELSEC-Q series. Features: 200-240VAC -> 5-24VDC This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€70.00

Q62P - Power supply - MITSUBISHI

Q62P

MITSUBISHI Power supply reference Q62P. MELSEC-Q series. Features: 100-240VAC -> 5-24VDC This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€140.00

Q63P - Power supply - MITSUBISHI

Q63P

MITSUBISHI Power supply reference Q63P . MELSEC-Q series. Features: 24VDC -> 5-24VDC This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€140.00

Q64P - Power supply - MITSUBISHI

Q64P

MITSUBISHI Power supply reference Q64P. MELSEC-Q series. Features: 100-240VAC -> 5-24VDC This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€80.00

Q00JCPU-E - CPU - MITSUBISHI

Q00JCPU-E

MITSUBISHI CPU reference Q00JCPU-E. MELSEC-Q series. Features: Combination of CPU module (single processor), 5 Slot Base unit and power supply This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€1,100.00

Q00CPU - CPU - MITSUBISHI

Q00CPU

MITSUBISHI CPU reference Q00CPU. MELSEC-Q series. Features: CPU multi processor. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€70.00

Q01CPU - CPU - MITSUBISHI

Q01CPU

MITSUBISHI CPU reference Q01CPU. MELSEC-Q series. Features: CPU multi processor. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€140.00

Q02CPU - CPU - MITSUBISHI

Q02CPU

MITSUBISHI CPU reference Q02CPU. MELSEC-Q series. Features: CPU multi processor. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€180.00

Q02HCPU - CPU - MITSUBISHI

Q02HCPU

MITSUBISHI CPU reference Q02HCPU. MELSEC-Q series. Features: CPU multi processor. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€160.00

Q06HCPU - CPU - MITSUBISHI

Q06HCPU

MITSUBISHI CPU reference Q06HCPU. MELSEC-Q series. Features: CPU multi processor. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€240.00

Q12HCPU - CPU - MITSUBISHI

Q12HCPU

MITSUBISHI CPU reference Q12HCPU. MELSEC-Q series. Features: CPU multi processor. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€450.00