Catalog

Showing 1-36 of 252 item(s)

MR-J2-100CT - Servodrive - MITSUBISHI

MR-J2-100CT

This MITSUBISHI servodrive, reference MR-J2-100CT is a Servo AC drive with indexing function. it belongs to the range MELDAS. Mitsubishi AC 3PH 200 to 230 VAC 50/60 Hz Servodrive for HC-SF102 and HC-SF103 Servo Motor This MR-J2-100CT servodrive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€780.00

R7D-APA3H - Servodrive - OMRON

R7D-APA3H

This OMRON servodrive and reference R7D-APA3H is part of the series SMARTSTEP A.R7D-APA3H : Single phase 200V - 30W, filter R88A-FIW104This R7D-APA3H servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€310.00

R7D-APA5H - Servodrive - OMRON

R7D-APA5H

This OMRON servodrive and reference R7D-APA5H is part of the series SMARTSTEP A.R7D-APA5H : Single phase 200V - 50W, filter R88A-FIW104This R7D-APA5H servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€420.00

R7D-AP01H - Servodrive - OMRON

R7D-AP01H

This OMRON servodrive and reference R7D-AP01H is part of the series SMARTSTEP A.R7D-AP01H : Single phase 200V - 100W, filter R88A-FIW104This R7D-AP01H servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€495.00

R7D-AP02H - Servodrive - OMRON

R7D-AP02H

This OMRON servodrive and reference R7D-AP02H is part of the series SMARTSTEP A.R7D-AP02H : Single phase 200V - 200W, filter R88A-FIW104This R7D-AP02H servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€890.00

R7D-AP04H - Servodrive - OMRON

R7D-AP04H

This OMRON servodrive and reference R7D-AP04H is part of the series SMARTSTEP A.R7D-AP04H : Single phase 200V - 400W, filter R88A-FIW107This R7D-AP04H servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€455.00

R7D-AP08H - Servodrive - OMRON

R7D-AP08H

This OMRON servodrive and reference R7D-AP08H is part of the series SMARTSTEP A.R7D-AP08H : Single phase 200V - 750W, filter R88A-FIW115This R7D-AP08H servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€1,810.00

R7D-APA3L - Servodrive - OMRON

R7D-APA3L

This OMRON servodrive and reference R7D-APA3L is part of the series SMARTSTEP A.R7D-APA3L : Single phase 100/115V AC, 50/60Hz - 30WThis R7D-APA3L servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€380.00

R7D-APA5L - Servodrive - OMRON

R7D-APA5L

This OMRON servodrive and reference R7D-APA5L is part of the series SMARTSTEP A.R7D-APA5L : Single phase 100/115V AC, 50/60Hz - 50WThis R7D-APA5L servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€460.00

R7D-AP01L - Servodrive - OMRON

R7D-AP01L

This OMRON servodrive and reference R7D-AP01L is part of the series SMARTSTEP A.R7D-AP01L : Single phase 100/115V AC, 50/60Hz - 100WThis R7D-AP01L servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€580.00

R7D-AP02L - Servodrive - OMRON

R7D-AP02L

This OMRON servodrive and reference R7D-AP02L is part of the series SMARTSTEP A.R7D-AP02L : Single phase 100/115V AC, 50/60Hz - 200WThis R7D-AP02L servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€670.00

R7D-AP04L - Servodrive - OMRON

R7D-AP04L

This OMRON servodrive and reference R7D-AP04L is part of the series SMARTSTEP A.R7D-AP04L : Single phase 100/115V AC, 50/60Hz - 400WThis R7D-AP04L servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€760.00

MR-J2-10CT - Servodrive - MITSUBISHI

MR-J2-10CT

This MITSUBISHI servodrive, reference MR-J2-10CT is a Servo AC drive with indexing function. it belongs to the range MELDAS. Mitsubishi AC 3PH 200 to 230 VAC 50/60 Hz Servodrive for HA-FF053/13 and HC-MF053/13 Servo Motor This MR-J2-10CT servodrive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€810.00

MR-J2-70CT - Servodrive - MITSUBISHI

MR-J2-70CT

This MITSUBISHI servodrive, reference MR-J2-70CT is a Servo AC drive with indexing function. it belongs to the range MELDAS. Mitsubishi AC 3PH 200 to 230 VAC 50/60 Hz Servodrive for HC-MF73 Servo Motor This MR-J2-70CT servodrive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,080.00

MR-J2-20CT - Servodrive - MITSUBISHI

MR-J2-20CT

This MITSUBISHI servodrive, reference MR-J2-20CT is a Servo AC drive with indexing function. it belongs to the range MELDAS. Mitsubishi AC 3PH 200 to 230 VAC 50/60 Hz Servodrive for HA-FF023 and HC-MF23 Servo Motor This MR-J2-20CT servodrive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€880.00

MR-J2-40CT - Servodrive - MITSUBISHI

MR-J2-40CT

This MITSUBISHI servodrive, reference MR-J2-40CT is a Servo AC drive with indexing function. it belongs to the range MELDAS. Mitsubishi AC 3PH 200 to 230 VAC 50/60 Hz Servodrive for HA-FF33/43 and HC-MF43 Servo Motor This MR-J2-40CT servodrive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€880.00

MR-J2-60CT - Servodrive - MITSUBISHI

MR-J2-60CT

This MITSUBISHI servodrive, reference MR-J2-60CT is a Servo AC drive with indexing function. it belongs to the range MELDAS. Mitsubishi AC 3PH 200 to 230 VAC 50/60 Hz Servodrive for HC-SF52/53 and HA-FF63 Servo Motor This MR-J2-60CT servodrive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€960.00

MR-J2-200CT - Servodrive - MITSUBISHI

MR-J2-200CT

This MITSUBISHI servodrive, reference MR-J2-200CT is a Servo AC drive with indexing function. it belongs to the range MELDAS. Mitsubishi AC 3PH 200 to 230 VAC 50/60 Hz Servodrive for HC-SF152/202/153/203 and HC-RF103/153 Servo Motor This MR-J2-200CT servodrive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,420.00

MR-J2-350CT - Servodrive - MITSUBISHI

MR-J2-350CT

This MITSUBISHI servodrive, reference MR-J2-350CT is a Servo AC drive with indexing function. it belongs to the range MELDAS. Mitsubishi AC 3PH 200 to 230 VAC 50/60 Hz Servodrive for HC-SF352/353 and HC-RF203 Servo Motor This MR-J2-350CT servodrive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,640.00

X20AI1744 - Analog input module - B&R

X20AI1744

This B&R analog input module is reference X20AI1744. It belongs to the X20 range. 1 full bridge strain gauge input, 24-bit converter resolution. 5 kHz input filter This B&R input module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€580.00

X20AI2622 - Analog input module - B&R

X20AI2622

This B&R analog input module is reference X20AI2622. It belongs to the X20 range. • 2 analog inputs • Either current or voltage signal • 13-bit digital converter resolution This B&R input module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€280.00

X20AI4622 - Analog input module - B&R

X20AI4622

This B&R analog input module is reference X20AI4622. It belongs to the X20 range. • 2 analog inputs • Either current or voltage signal • 13-bit digital converter resolution This B&R input module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€160.00

X20BM11 - Bus module - B&R

X20BM11

This B&R bus module is reference X20BM11. It belongs to the X20 range. The BM11 bus module serves as the base for all 24 VDC X20 I/O modules. • Bus module for 24 VDC I/O modules • The internal I/O supply is inter connected This B&R bus module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€39.00

X20BT9100 - Bus transmitter - B&R

X20BT9100

This B&R bus transmitter is reference X20BT9100. It belongs to the X20 range. The bus transmitter BT9100 provides for the seamless expansion of the X20 system. The stations can be up to 100m away from each other. • X2X Link bus transmitter • For seamless expansion of the systems • Up to 100 m segment lengths • Feed for internal I/O power supply This...

€89.00

X20ZF0000 - Dummy Module - B&R

X20ZF0000

This B&R dummy module is reference X20BT9100. It belongs to the X20 range. • Place holder for later system expansion • Used as a terminal holder • Module with no electrical function This B&R dummy module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€85.00

R7M-A10030-BS1 - Servo motor - OMRON

R7M-A10030-BS1

This OMRON R7M-A10030-BS1 servo motor is a SMARTSTEP A series motor. Characteristics: 230V, 100W, 0.87A, with brake for R7D-AP01H servo drive. This R7M-A10030-BS1 servomotor is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€570.00

R7M-A20030-S1-D - Servo motor - OMRON

R7M-A20030-S1-D

This OMRON R7M-A20030-S1-D servo motor is a SMARTSTEP A series motor. Characteristics: 230V, 200W, 2A without brake for R7D-AP02H servo drive. This R7M-A20030-S1-D servomotor is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€530.00

R7M-A75030-BS1-D - Servo motor - OMRON

R7M-A75030-BS1-D

This OMRON R7M-A75030-BS1-D servo motor is a SMARTSTEP A series motor. Characteristics: 230V, 750W, 4.4A, with brake for R7D-AP08H servo drive. This R7M-A75030-BS1-D servomotor is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,795.00

DSD13M02 - Digital servoamplifier - PARKER

DSD13M02

This reference servoamplifier DSD13M02 and PARKER is a servo drive from the DIGIVEX DRIVE series. DSD13M02 : 230V single phase 50/60Hz, 2A/4A, 375W This PARKER digital servoamplifier is at your disposal to replace your defective equipment and has a suitable guarantee.

€980.00

DSD13M04 - Digital servoamplifier - PARKER

DSD13M04

This reference servoamplifier DSD13M04 and PARKER is a servo drive from the DIGIVEX DRIVE series. DSD13M04: 230V single phase 50/60Hz, 4A/8A, 750W This PARKER digital servoamplifier is at your disposal to replace your defective equipment and has a suitable guarantee.

€420.00

DSD13M07 - Digital servoamplifier - PARKER

DSD13M07

This reference servoamplifier DSD13M07 and PARKER is a servo drive from the DIGIVEX DRIVE series. DSD13M07: 230V single phase 50/60Hz, 7.5A/15A, 1500W This PARKER digital servoamplifier is at your disposal to replace your defective equipment and has a suitable guarantee.

€450.00

DSD13004 - Digital servoamplifier - PARKER

DSD13004

This reference servoamplifier DSD13004 and PARKER is a servo drive from the DIGIVEX DRIVE series. DSD13004: 230V three-phase 50/60Hz, 4A/8A, 750W This PARKER digital servoamplifier is at your disposal to replace your defective equipment and has a suitable guarantee.

€400.00

DSD13007 - Digital servoamplifier - PARKER

DSD13007

This reference servoamplifier DSD13007 and PARKER is a servo drive from the DIGIVEX DRIVE series. DSD13007: 230V three-phase 50/60Hz, 7.5A/15A, 1500W This PARKER digital servoamplifier is at your disposal to replace your defective equipment and has a suitable guarantee.

€420.00

DSD13015 - Digital servoamplifier - PARKER

DSD13015

This reference servoamplifier DSD13015 and PARKER is a servo drive from the DIGIVEX DRIVE series. DSD13015: 230V three-phase 50/60Hz, 15A/30A, 3000W This PARKER digital servoamplifier is at your disposal to replace your defective equipment and has a suitable guarantee.

€440.00

DSD13030 - Digital servoamplifier - PARKER

DSD13030

This reference servoamplifier DSD13030 and PARKER is a servo drive from the DIGIVEX DRIVE series. DSD13030: 230V three-phase 50/60Hz, 30A/60A, 6000W This PARKER digital servoamplifier is at your disposal to replace your defective equipment and has a suitable guarantee.

€440.00

DSD13060 - Digital servoamplifier - PARKER

DSD13060

This reference servoamplifier DSD13060 and PARKER is a servo drive from the DIGIVEX DRIVE series. DSD13060: 230V three-phase 50/60Hz, 60A/100A, 12000W This PARKER digital servoamplifier is at your disposal to replace your defective equipment and has a suitable guarantee.

€450.00