Catalog

Showing 1-23 of 23 item(s)

On sale!

S30A-4011CA - Laser Scanner - SICK

S30A-4011CA

This S3000 series laser scanner has four protection fields and four servo fields that are freely programmable using your SICK software. You can therefore configure your laser scanner according to the conditions of your installation. This SICK S30A-4011CA scanner is at your disposal to replace your defective equipment.

€2,585.00

S30A-4011BA - Laser Scanner - SICK

S30A-4011BA

This S3000 Series safety laser scanner features 1 protective field set and four servo fields that are freely programmable using your SICK software. You can therefore configure your laser scanner according to the conditions of your installation. Protective Field range : 4 meters This SICK S30A-4011BA scanner is at your disposal to replace your defective...

€2,220.00

S30A-7011CA - Laser Scanner - SICK

S30A-7011CA

This S3000 series safety laser scanner features 4 protective field sets and 12 control fields that are freely programmable using your SICK software. You can therefore configure your laser scanner according to the conditions of your installation. Protective Field range : 7 m. This SICK S30A-7011CA scanner is at your disposal to replace your defective...

€715.00

JANCD-YEW01-E - Interface board - YASKAWA

JANCD-YEW01-E

This JANCD-YEW01-E and YASKAWA interface board is an interface board for DX200 robot control unit. This board can connect an analog arc control welding power source to the DX200. This JANCD-YEW01-E YASKAWA interface board is available to replace your defective equipment and has a guarantee adapted to your needs.

€790.00

S30A-6011EA - Laser Scanner - SICK

S30A-6011EA

This safety laser scanner can only be used in combination with the EFI system group, eg. with a Flexi Soft safety control system or another S300 or S3000 safety laser scanner. Range: 5.5 m This SICK S30A-6011EA scanner is at your disposal to replace your defective equipment.

€2,560.00

S30A-7011EA - Laser Scanner - SICK

S30A-7011EA

This S3000 Series safety laser scanner features 1 protective field set and 64 servo fields that are freely programmable using your SICK software. You can therefore configure your laser scanner according to the conditions of your installation. Protective Field range : 7 meters This SICK S30A-7011EA scanner is at your disposal to replace your defective...

€890.00

MR-J10MA - Servo Amplifier - MITSUBISHI

MR-J10MA

This MITSUBISHI drive, reference MR-J10MA is an AC Servo drive. It belongs to the MELSERVO-J Series range. Mitsubishi AC 3 phase 200/240V, 1.2A dimmer for HA-ME053 and HA-ME13 servo motor This MR-J10MA drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€245.00

MR-J20MA - Servo Amplifier - MITSUBISHI

MR-J20MA

This MITSUBISHI drive, reference MR-J20MA is an AC Servo drive. It belongs to the MELSERVO-J Series range. Mitsubishi AC 3 phase 200/240V, 1.7A dimmer for HA-ME23 servo motor This MR-J20MA drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€820.00

MR-J40MA - Servo Amplifier - MITSUBISHI

MR-J40MA

This MITSUBISHI drive, reference MR-J40MA is an AC Servo drive. It belongs to the MELSERVO-J Series range. Mitsubishi AC 3 phase 200/240V, 2.8A dimmer for HA-ME43 servo motor This MR-J40MA drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€690.00

MR-J70MA - Servo Amplifier - MITSUBISHI

MR-J70MA

This MITSUBISHI drive, reference MR-J70MA is an AC Servo drive. It belongs to the MELSERVO-J Series range. Mitsubishi AC 3 phase 200/240V, 5.3A dimmer for HA-ME73 servo motor This MR-J70MA drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€700.00

MR-J10A - Servo Amplifier - MITSUBISHI

MR-J10A

This MITSUBISHI drive, reference MR-J10A is an AC Servo drive. It belongs to the MELSERVO-J Series range. Mitsubishi AC 3 phase 200/240V, 0.6A dimmer for HA-FE053, HA-FE13 servo motor This MR-J10A drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€250.00

MR-J20A - Servo Amplifier - MITSUBISHI

MR-J20A

This MITSUBISHI drive, reference MR-J20A is an AC Servo drive. It belongs to the MELSERVO-J Series range. Mitsubishi AC 3 phase 200/240V, 1.3A dimmer for HA-FE23 servo motor This MR-J20A drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€220.00

MR-J40A - Servo Amplifier - MITSUBISHI

MR-J40A

This MITSUBISHI drive, reference MR-J40A is an AC Servo drive. It belongs to the MELSERVO-J Series range. Mitsubishi AC 3 phase 200/240V, 1.9A dimmer for HA-FE33, HA-FE43 servo motor This MR-J40A drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€390.00

MR-J60A - Servo Amplifier - MITSUBISHI

MR-J60A

This MITSUBISHI drive, reference MR-J60A is an AC Servo drive. It belongs to the MELSERVO-J Series range. Mitsubishi AC 3 phase 200/240V, 3.6A dimmer for HA-FE63 servo motor This MR-J60A drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€610.00

MR-J100A - Servo Amplifier - MITSUBISHI

MR-J100A

This MITSUBISHI drive, reference MR-J100A is an AC Servo drive. It belongs to the MELSERVO-J Series range. Mitsubishi AC 3 phase 200/240V, 4.5A dimmer for HA-SE81, HA-SE121, HA-SE103, HA-SE102 servo motor This MR-J100A drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€740.00

MR-J200A - Servo Amplifier - MITSUBISHI

MR-J200A

This MITSUBISHI drive, reference MR-J200A is an AC Servo drive. It belongs to the MELSERVO-J Series range. Mitsubishi AC 3 phase 200/240V, 9.5A dimmer for HA-SE153, HA-SE201, HA-SE203,HA-SE152, HA-SE202 servo motor This MR-J200A drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€830.00

MR-J350A - Servo Amplifier - MITSUBISHI

MR-J350A

This MITSUBISHI drive, reference MR-J350A is an AC Servo drive. It belongs to the MELSERVO-J Series range. Mitsubishi AC 3 phase 200/240V, 14A dimmer for HA-SE301, HA-SE352, HA-SE353 servo motor This MR-J350A drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,710.00

MR-J70A - Servo Amplifier - MITSUBISHI

MR-J70A

This MITSUBISHI drive, reference MR-J70A is an AC Servo drive. It belongs to the MELSERVO-J Series range. Mitsubishi AC 3 phase 200/240V, 3A dimmer for HA-SE52, HA-SE53 servo motor This MR-J70A drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€785.00

BWU2828 - PROFINET safety module - BIHL+WIEDEMANN

BWU2828

This BIHL+WIEDEMANN brand BWU2828 gateway module is from the AS-i 3.0 PROFINET range ASi-3 PROFINET gateway with integrated safety monitor, 2 ASi masters, 1 power supply for 2 ASi circuits, 6 digital inputs or 3 2-channel safety inputs, expandable to 62 2-channel safety inputs, 1922 2-channel safety inputs channels in max. configuration, 6 enabling...

€490.00

BWU3080 - PROFINET safety module - BIHL+WIEDEMANN

BWU3080

This BIHL+WIEDEMANN brand BWU3080 gateway module is from the AS-i 3.0 PROFINET range ASi-3 PROFINET gateway with integrated safety monitor, 2 ASi masters, 6 digital inputs or 3 2-channel safety inputs (SIL 3, cat. 4), expandable to 62 2-channel safety inputs, 1922 2-channel safety inputs 2 channels in max. configuration, 6 enabling circuits (6 x...

€400.00

BWU2798 - PROFINET safety module - BIHL+WIEDEMANN

BWU2798

This BIHL+WIEDEMANN brand BWU2798 gateway module is from the AS-i 3.0 PROFINET range ASi-3 PROFINET gateway with integrated safety monitor, 1 ASi master, 1 power supply for 2 ASi circuits, 6 digital inputs or 3 2-channel safety inputs, expandable to 31 2-channel safety inputs, 1891 2-channel safety inputs channels in max. configuration, 6 enabling...

€1,400.00

BWU2642 - PROFINET safety module - BIHL+WIEDEMANN

BWU2642

This BIHL+WIEDEMANN brand BWU2642 gateway module is from the AS-i 3.0 PROFINET range ASi-3 PROFINET gateway with integrated safety monitor, 2 ASi masters, 1 power supply for 2 ASi circuits, 4 discrete inputs, expandable to 62 2-channel safety inputs, 1922 2-channel safety inputs in max configuration, 4 circuits (2 x relay outputs and 2 x electronic safety...

€860.00

BWU2919 - PROFINET safety module - BIHL+WIEDEMANN

BWU2919

This BIHL+WIEDEMANN brand BWU2919 gateway module is from the AS-i 3.0 PROFINET range 24 volt ASi-3 PROFINET gateway in stainless steel, 1 ASi master, 1 power supply for 2 ASi circuits, diagnostics and configuration via PROFINET, detection of duplicate addresses, ASi fault monitoring, programmable in optional C This BIHL+WIEDEMANN brand BWU2919 module is...

€790.00