BWU2919 - PROFINET safety module - BIHL+WIEDEMANN
This BIHL+WIEDEMANN brand BWU2919 gateway module is from the AS-i 3.0 PROFINET range
24 volt ASi-3 PROFINET gateway in stainless steel, 1 ASi master, 1 power supply for 2 ASi circuits, diagnostics and configuration via PROFINET, detection of duplicate addresses, ASi fault monitoring, programmable in optional C
This BIHL+WIEDEMANN brand BWU2919 module is at your disposal to replace your defective equipment.
ASi-3 PROFINET Gateways with Integrated Safety Monitor
2 / 1 ASi-3 master(s), PROFINET device Up to 32 enable circuits
• up to 6 enabling circuits (cat. 4/SIL 3 relays) on the monitor, relays or electronic safety outputs ASi safety outputs are supported
• up to 32 independent ASi outputs several ASi safety outputs possible via a single address 1 ASi safety monitor for 2 ASi buses
• 1 single monitor program manages safety participants on 2 ASi buses
• networking of the 2 buses is superfluous Safe speed/stop monitor Applications up to category 4/PLe/SIL 3 Memory card for saving configuration data
Integrated decoupling, ASi current measurement in the gateway "yes, 4 A/ASi circuit max.": Data decoupling integrated in the gateway. Economical supply of 2 ASi bundles with a single supply. Operation with standard 24 V power supply possible when using short cables. "no, 8 A/ASi circuit max., redundant power supply": 1 power supply per ASi harness. The gateway is powered in normal operation by one of the two ASi power supplies. If this power supply fails, automatic switchover to the other ASi power supply makes it possible to maintain all the diagnostic functions while preserving the operation of the ASi harness not concerned.
"Ethernet fieldbus + Ethernet diagnostics" configuration and diagnostics interface: Access to ASi master and safety monitor using Bihl+Wiedemann software via Ethernet diagnostics interface or fieldbus interface ethernet. "Ethernet + RS 232 fieldbus": Access to the ASi master and the safety monitor using Bihl+Wiedemann software via the Ethernet fieldbus interface or using an adapter cable via the RS 232 interface.
Automation with AS-Interface
BIHL+WIEDEMANN offers versatile products and solutions in the field of automation. AS-Interface masters / gateways, speed controllers, safety I/O modules, network couplers, safety monitors, products for home automation / building automation, handling and transit systems, process automation solutions and much more.