Catalog

Showing 1-22 of 22 item(s)

LMC20 - Lexium Controller - TELEMECANIQUE

LMC20

This TELEMECANIQUE motion controller is reference LMC20. It is part of the LEXIUM range. Allows to connect: a graphic terminal, a Magelis HMI terminal, a PLC ... This TELEMECANIQUE motion controller is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€2,695.00

BWU2828 - PROFINET safety module - BIHL+WIEDEMANN

BWU2828

This BIHL+WIEDEMANN brand BWU2828 gateway module is from the AS-i 3.0 PROFINET range ASi-3 PROFINET gateway with integrated safety monitor, 2 ASi masters, 1 power supply for 2 ASi circuits, 6 digital inputs or 3 2-channel safety inputs, expandable to 62 2-channel safety inputs, 1922 2-channel safety inputs channels in max. configuration, 6 enabling...

€490.00

BWU3080 - PROFINET safety module - BIHL+WIEDEMANN

BWU3080

This BIHL+WIEDEMANN brand BWU3080 gateway module is from the AS-i 3.0 PROFINET range ASi-3 PROFINET gateway with integrated safety monitor, 2 ASi masters, 6 digital inputs or 3 2-channel safety inputs (SIL 3, cat. 4), expandable to 62 2-channel safety inputs, 1922 2-channel safety inputs 2 channels in max. configuration, 6 enabling circuits (6 x...

€400.00

BWU2798 - PROFINET safety module - BIHL+WIEDEMANN

BWU2798

This BIHL+WIEDEMANN brand BWU2798 gateway module is from the AS-i 3.0 PROFINET range ASi-3 PROFINET gateway with integrated safety monitor, 1 ASi master, 1 power supply for 2 ASi circuits, 6 digital inputs or 3 2-channel safety inputs, expandable to 31 2-channel safety inputs, 1891 2-channel safety inputs channels in max. configuration, 6 enabling...

€1,400.00

BWU2642 - PROFINET safety module - BIHL+WIEDEMANN

BWU2642

This BIHL+WIEDEMANN brand BWU2642 gateway module is from the AS-i 3.0 PROFINET range ASi-3 PROFINET gateway with integrated safety monitor, 2 ASi masters, 1 power supply for 2 ASi circuits, 4 discrete inputs, expandable to 62 2-channel safety inputs, 1922 2-channel safety inputs in max configuration, 4 circuits (2 x relay outputs and 2 x electronic safety...

€860.00

BWU2919 - PROFINET safety module - BIHL+WIEDEMANN

BWU2919

This BIHL+WIEDEMANN brand BWU2919 gateway module is from the AS-i 3.0 PROFINET range 24 volt ASi-3 PROFINET gateway in stainless steel, 1 ASi master, 1 power supply for 2 ASi circuits, diagnostics and configuration via PROFINET, detection of duplicate addresses, ASi fault monitoring, programmable in optional C This BIHL+WIEDEMANN brand BWU2919 module is...

€790.00

DST1201 - Variable speed drive - CONTROL TECHNIQUES

DST1201

This servo motor reference DST1201 and Control Techniques brand is a drive from the DIGITAX ST range. DST1201: Single phase 200/240V, 1.1A. Three-phase 200/240V, 1.7A This Control techniques drive is at your disposal to replace your defective equipment and have an appropriate guarantee. Drive tested on an engine test bench.

€1,760.00

DST1202 - Variable speed drive - CONTROL TECHNIQUES

DST1202

This servo motor reference DST1202 and Control Techniques brand is a drive from the DIGITAX ST range. DST1202: Single phase 200/240V, 2.4A. Three-phase 200/240V, 3.8A This Control techniques drive is at your disposal to replace your defective equipment and have an appropriate guarantee. Drive tested on an engine test bench.

€3,600.00

DST1203 - Variable speed drive - CONTROL TECHNIQUES

DST1203

This servo motor reference DST1203 and Control Techniques brand is a drive from the DIGITAX ST range. DST1203: Single phase 200/240V, 2.9A. Three-phase 200/240V, 5.4A This Control techniques drive is at your disposal to replace your defective equipment and have an appropriate guarantee. Drive tested on an engine test bench.

€1,990.00

DST1204 - Variable speed drive - CONTROL TECHNIQUES

DST1204

This servo motor reference DST1204 and Control Techniques brand is a drive from the DIGITAX ST range. DST1204: Single phase 200/240V, 4.7A. Three-phase 200/240V, 7.6A This Control techniques drive is at your disposal to replace your defective equipment and have an appropriate guarantee. Drive tested on an engine test bench.

€4,140.00

DST1401 - Variable speed drive - CONTROL TECHNIQUES

DST1401

This servo motor reference DST1401 and Control Techniques brand is a drive from the DIGITAX ST range. DST1401: Triphasé 380/480V, 1.5A. This Control techniques drive is at your disposal to replace your defective equipment and have an appropriate guarantee. Drive tested on an engine test bench.

€2,190.00

DST1402 - Variable speed drive - CONTROL TECHNIQUES

DST1402

This servo motor reference DST1402 and Control Techniques brand is a drive from the DIGITAX ST range. DST1402: Triphasé 380/480V, 2.7A. This Control techniques drive is at your disposal to replace your defective equipment and have an appropriate guarantee. Drive tested on an engine test bench.

€2,860.00

DST1403 - Variable speed drive - CONTROL TECHNIQUES

DST1403

This servo motor reference DST1403 and Control Techniques brand is a drive from the DIGITAX ST range. DST1403: Triphasé 380/480V, 4A. This Control techniques drive is at your disposal to replace your defective equipment and have an appropriate guarantee. Drive tested on an engine test bench.

€1,510.00

DST1404 - Variable speed drive - CONTROL TECHNIQUES

DST1404

This servo motor reference DST1404 and Control Techniques brand is a drive from the DIGITAX ST range. DST1404: Triphasé 380/480V, 5.9A. This Control techniques drive is at your disposal to replace your defective equipment and have an appropriate guarantee. Drive tested on an engine test bench.

€1,950.00

DST1405 - Variable speed drive - CONTROL TECHNIQUES

DST1405

This servo motor reference DST1405 and Control Techniques brand is a drive from the DIGITAX ST range. DST1405: Triphasé 380/480V, 8A. This Control techniques drive is at your disposal to replace your defective equipment and have an appropriate guarantee. Drive tested on an engine test bench.

€2,890.00

SDS 4021 - Servo Converter - STÖBER

SDS 4021

This variable speed drive for servo motor reference SDS 4021 and brand Stöber is a variable speed drive from the POSIDYN SDS 4000 range. SDS 4021: Three-phase 230...480V, 2A, 1kVA. This Stöber drive is available to replace your defective equipment and has an appropriate warranty. Drive tested on an engine test bench.

€1,725.00

SDS 4011 - Servo Converter - STÖBER

SDS 4011

This variable speed drive for servo motor reference SDS 4011 and brand Stöber is a variable speed drive from the POSIDYN SDS 4000 range. SDS 4011: Three-phase 230...480V, 1.5A, 1kVA. This Stöber drive is available to replace your defective equipment and has an appropriate warranty. Drive tested on an engine test bench.

€550.00

SDS 4041 - Servo Converter - STÖBER

SDS 4041

This variable speed drive for servo motor reference SDS 4041 and brand Stöber is a variable speed drive from the POSIDYN SDS 4000 range. SDS 4041: Three-phase 230...480V, 6A, 4kVA. This Stöber drive is available to replace your defective equipment and has an appropriate warranty. Drive tested on an engine test bench.

€2,310.00

SDS 4071 - Servo Converter - STÖBER

SDS 4071

This variable speed drive for servo motor reference SDS 4071 and brand Stöber is a variable speed drive from the POSIDYN SDS 4000 range. SDS 4071: Three-phase 230...480V, 10A, 7kVA. This Stöber drive is available to replace your defective equipment and has an appropriate warranty. Drive tested on an engine test bench.

€6,180.00

SDS 4101 - Servo Converter - STÖBER

SDS 4101

This variable speed drive for servo motor reference SDS 4101 and brand Stöber is a variable speed drive from the POSIDYN SDS 4000 range. SDS 4101: Three-phase 230...480V, 14A, 10kVA. This Stöber drive is available to replace your defective equipment and has an appropriate warranty. Drive tested on an engine test bench.

€3,980.00

SDS 4141 - Servo Converter - STÖBER

SDS 4141

This variable speed drive for servo motor reference SDS 4141 and brand Stöber is a variable speed drive from the POSIDYN SDS 4000 range. SDS 4141: Three-phase 230...480V, 20A, 14kVA. This Stöber drive is available to replace your defective equipment and has an appropriate warranty. Drive tested on an engine test bench.

€4,830.00

DST1405P - Variable speed drive - CONTROL TECHNIQUES

DST1405P

This servo motor reference DST1405P and Control Techniques brand is a drive from the DIGITAX ST range. DST1405: Triphasé 380/480V, 8A. This Control techniques drive is at your disposal to replace your defective equipment and have an appropriate guarantee. Drive tested on an engine test bench.

€2,940.00