LMC20 - Lexium Controller - TELEMECANIQUE
This TELEMECANIQUE motion controller is reference LMC20. It is part of the LEXIUM range.
Allows to connect: a graphic terminal, a Magelis HMI terminal, a PLC ...
This TELEMECANIQUE motion controller is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
The integrated communication port allows direct access to the Modbus protocol:
• The RJ45 Modbus HMI socket on the front of the Lexium Controller allows you to connect:
- the graphic terminal,
- an HMI Magelis industrial terminal,
a programmable logic controller (PLC),
- another controller,
- the Motion Pro / CoDeSys software workshop.
The Modbus port of the Lexium Controller can be used for the following functions:
• configuration,
• setting,
• order
• monitoring
The Lexium Controller supports:
• the two-wire RS485 physical layer,
• RTU transmission mode.
The speed of the Modbus network is 38.4 Kb / s. It can be configured at 19.2 but this configuration causes limitations of use under Motion Pro / CoDeSys via the serial link.
Since its creation, the Telemecanique brand has been pursuing an innovation policy, which has become one of the world’s first references in automatism management.
The story of Telemécanique is read through that of its inventions, initiated with the launch of the first contactor on bars. A patent filed the same year of its acquisition, in 1924! It will develop contactors D became world reference. The 1980s marked the acquisition of Telemechanics by Schneider Electric (1988).