Catalog

Showing 1-36 of 43 item(s)

73-552-0005 - Power Supply - ASTEC

73-552-0005

This 73-552-0005 and ASTEC brand power supply module belongs to the MP range. Astec and Artesyn AC DC and DC DC Products. MP Series - Up to 1200 Watts. 73-552-0005 : Input : 380V. Output : 360W, 5V This Astec 73-551-0005 module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€460.00

73-554-0330 - Power Supply - ASTEC

73-554-0330

This ASTEC / ARTESYN power supply module 73-554-0330 belongs to the MP4 Module range. Standard 144W MP power supply with 12 ohm precharge resistor. (4NN, V1 et V2 = 15V) (4LL, V1 et V2 = 12V) This ASTEC 73-554-0330 power supply module, tested under full load, is at your disposal to replace your defective module.

€520.00

6AV3617-1JC30-0AX2 - Operator panel - SIEMENS

6AV3617-1JC30-0AX2

This operator panel 6AV3617-1JC30-0AX2 and brand SIEMENS is a panel of the range OP17. OPERATOR PANEL OP17 / DP12 LC DISPLAY, BACKLIT LED 4X20 / 8X40 LINESXCHARACTERS SIMATIC S5, 505, S7, M7, NATIVE DRIVERS, PROFIBUS-DP 12 MBAUD, UL / CSA-LISTED This 6AV3617-1JC30-0AX2 Siemens panel is at your disposal to replace your defective hardware and has a warranty...

€1,780.00

6AV3617-1JC30-0AX1 - Operator Panel - SIEMENS

6AV3617-1JC30-0AX1

This panel operator 6AV3617-1JC30-0AX1 and brand SIEMENS is a panel of the range OP17. OPERATOR PANEL OP17 / DP12 LC DISPLAY, BACKLIT LED 4X20 / 8X40 LINESXCHARACTERS SIMATIC S5, 505, S7, M7, NATIVE DRIVERS, PROFIBUS-DP 12 MBAUD, UL / CSA-LISTED This 6AV3617-1JC30-0AX1 Siemens panel is at your disposal to replace your defective equipment and has a...

€750.00

On sale!

6AV3617-1JC20-0AX1 - Operator Panel - SIEMENS

6AV3617-1JC20-0AX1

OP SIEMENS reference 6AV3617-1JC20-0AX1 for Simatic S7. OPERATOR PANEL OP17 / DP LC DISPLAY, BACKLIT 4X20 / 8X40 LED LINESXCHARACTERS SIMATIC S7, M7 PROFIBUS-DP 1.5 MBAUD UL / CSA-LISTED This OP 6AV3617-1JC20-0AX1 is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€680.00

6AV3617-1JC20-0AX2 - Operator Panel - SIEMENS

6AV3617-1JC20-0AX2

OP SIEMENS reference 6AV3617-1JC20-0AX2 for Simatic S7. Operator Panel OP 17/DP LC display, LED backlit 4x 20/8x 40 lines x characters SIMATIC S7, M7, PROFIBUS DP 1.5 Mbaud with UL/CSA approval This OP 6AV3617-1JC20-0AX2 is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,000.00

637+/D6R22-7-CAN - Servo Controller - EUROTHERM

637+/D6R22-7-CAN

This 637+/D6R22-7-CAN reference drive and the EUROTHERM brand is a 637 series drive. This 637 digital drive is designed for the control of brushless motors equipped with a resolver as standard. It can be controlled in torque, speed or position. This EUROTHERM drive is at your disposal to replace your defective equipment and has a guarantee adapted to your...

€930.00

R7D-APA3H - Servodrive - OMRON

R7D-APA3H

This OMRON servodrive and reference R7D-APA3H is part of the series SMARTSTEP A.R7D-APA3H : Single phase 200V - 30W, filter R88A-FIW104This R7D-APA3H servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€310.00

R7D-APA5H - Servodrive - OMRON

R7D-APA5H

This OMRON servodrive and reference R7D-APA5H is part of the series SMARTSTEP A.R7D-APA5H : Single phase 200V - 50W, filter R88A-FIW104This R7D-APA5H servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€420.00

R7D-AP01H - Servodrive - OMRON

R7D-AP01H

This OMRON servodrive and reference R7D-AP01H is part of the series SMARTSTEP A.R7D-AP01H : Single phase 200V - 100W, filter R88A-FIW104This R7D-AP01H servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€495.00

R7D-AP02H - Servodrive - OMRON

R7D-AP02H

This OMRON servodrive and reference R7D-AP02H is part of the series SMARTSTEP A.R7D-AP02H : Single phase 200V - 200W, filter R88A-FIW104This R7D-AP02H servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€890.00

R7D-AP04H - Servodrive - OMRON

R7D-AP04H

This OMRON servodrive and reference R7D-AP04H is part of the series SMARTSTEP A.R7D-AP04H : Single phase 200V - 400W, filter R88A-FIW107This R7D-AP04H servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€455.00

R7D-AP08H - Servodrive - OMRON

R7D-AP08H

This OMRON servodrive and reference R7D-AP08H is part of the series SMARTSTEP A.R7D-AP08H : Single phase 200V - 750W, filter R88A-FIW115This R7D-AP08H servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€1,810.00

R7D-APA3L - Servodrive - OMRON

R7D-APA3L

This OMRON servodrive and reference R7D-APA3L is part of the series SMARTSTEP A.R7D-APA3L : Single phase 100/115V AC, 50/60Hz - 30WThis R7D-APA3L servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€380.00

R7D-APA5L - Servodrive - OMRON

R7D-APA5L

This OMRON servodrive and reference R7D-APA5L is part of the series SMARTSTEP A.R7D-APA5L : Single phase 100/115V AC, 50/60Hz - 50WThis R7D-APA5L servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€460.00

R7D-AP01L - Servodrive - OMRON

R7D-AP01L

This OMRON servodrive and reference R7D-AP01L is part of the series SMARTSTEP A.R7D-AP01L : Single phase 100/115V AC, 50/60Hz - 100WThis R7D-AP01L servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€580.00

R7D-AP02L - Servodrive - OMRON

R7D-AP02L

This OMRON servodrive and reference R7D-AP02L is part of the series SMARTSTEP A.R7D-AP02L : Single phase 100/115V AC, 50/60Hz - 200WThis R7D-AP02L servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€670.00

R7D-AP04L - Servodrive - OMRON

R7D-AP04L

This OMRON servodrive and reference R7D-AP04L is part of the series SMARTSTEP A.R7D-AP04L : Single phase 100/115V AC, 50/60Hz - 400WThis R7D-AP04L servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€760.00

R88D-KN01H-ECT - Servo Drive - OMRON

R88D-KN01H-ECT

This OMRON servo drive is reference R88D-KN01H-ECT. It matches the OMRON ACCURAX G5 servo drive range. Servo drive : Input : 200-240V, 1 or 3 PH, 50/60Hz, Output : 200-240V, 3PH, 1.2A Servo drive OMRON reconditioned and tested on bench manufacturer (Test 100%)

€550.00

R88D-KN02H-ECT - Servo Drive - OMRON

R88D-KN02H-ECT

This OMRON servo drive is reference R88D-KN02H-ECT. It matches the OMRON ACCURAX G5 servo drive range. Servo drive : Input : 200-240V, 1 or 3 PH, 50/60Hz, Output : 200-240V, 3PH, 1.6A Servo drive OMRON reconditioned and tested on bench manufacturer (Test 100%)

€560.00

R88D-KN04H-ECT - Servo Drive - OMRON

R88D-KN04H-ECT

This OMRON servo drive is reference R88D-KN04H-ECT. It matches the OMRON ACCURAX G5 servo drive range. Servo drive : Input : 200-240V, 1 or 3 PH, 50/60Hz, Output : 200-240V, 3PH, 2.6A Servo drive OMRON reconditioned and tested on bench manufacturer (Test 100%)

€570.00

R88D-KN08H-ECT - Servo Drive - OMRON

R88D-KN08H-ECT

This OMRON servo drive is reference R88D-KN08H-ECT. It matches the OMRON ACCURAX G5 servo drive range. Servo drive : Input : 200-240V, 1 or 3 PH, 50/60Hz, Output : 200-240V, 3PH, 4.1A Servo drive OMRON reconditioned and tested on bench manufacturer (Test 100%)

€580.00

R88D-KN15H-ECT - Servo Drive - OMRON

R88D-KN15H-ECT

This OMRON servo drive is reference R88D-KN15H-ECT. It matches the OMRON ACCURAX G5 servo drive range. Servo drive : Input : 200-240V, 1 or 3 PH, 50/60Hz, Output : 200-240V, 3PH, 9.4A Servo drive OMRON reconditioned and tested on bench manufacturer (Test 100%)

€600.00

R88D-KN10H-ECT - Servo Drive - OMRON

R88D-KN10H-ECT

This OMRON servo drive is reference R88D-KN10H-ECT. It matches the OMRON ACCURAX G5 servo drive range. Servo drive : Input : 200-240V, 1 or 3 PH, 50/60Hz, Output : 200-240V, 3PH, 5.9A Servo drive OMRON reconditioned and tested on bench manufacturer (Test 100%)

€705.00

R88D-KT01H - Servo Drive - OMRON

R88D-KT01H

This OMRON servo drive is reference R88D-KT01H. It matches the OMRON ACCURAX G5 servo drive range. Servo drive : Input : 200-240V, 1 or 3 PH, 50/60Hz, Output : 200-240V, 3PH, 1.2A Servo drive OMRON reconditioned and tested on bench manufacturer (Test 100%)

€460.00

R88D-KT02H - Servo Drive - OMRON

R88D-KT02H

This OMRON servo drive is reference R88D-KT02H. It matches the OMRON ACCURAX G5 servo drive range. Servo drive : Input : 200-240V, 1 or 3 PH, 50/60Hz, Output : 200-240V, 3PH, 1.6A Servo drive OMRON reconditioned and tested on bench manufacturer (Test 100%)

€460.00

R88D-KT04H - Servo Drive - OMRON

R88D-KT04H

This OMRON servo drive is reference R88D-KT04H. It matches the OMRON ACCURAX G5 servo drive range. Servo drive : Input : 200-240V, 1 or 3 PH, 50/60Hz, Output : 200-240V, 3PH, 2.6A Servo drive OMRON reconditioned and tested on bench manufacturer (Test 100%)

€480.00

R88D-KT08H - Servo Drive - OMRON

R88D-KT08H

This OMRON servo drive is reference R88D-KT08H. It matches the OMRON ACCURAX G5 servo drive range. Servo drive : Input : 200-240V, 1 or 3 PH, 50/60Hz, Output : 200-240V, 3PH, 4.1A Servo drive OMRON reconditioned and tested on bench manufacturer (Test 100%)

€780.00

R88D-KT15H - Servo Drive - OMRON

R88D-KT15H

This OMRON servo drive is reference R88D-KT15H. It matches the OMRON ACCURAX G5 servo drive range. Servo drive : Input : 200-240V, 1 or 3 PH, 50/60Hz, Output : 200-240V, 3PH, 9.4A Servo drive OMRON reconditioned and tested on bench manufacturer (Test 100%)

€800.00

R88D-KT10H - Servo Drive - OMRON

R88D-KT10H

This OMRON servo drive is reference R88D-KT10H. It matches the OMRON ACCURAX G5 servo drive range. Servo drive : Input : 200-240V, 1 or 3 PH, 50/60Hz, Output : 200-240V, 3PH, 5.9A Servo drive OMRON reconditioned and tested on bench manufacturer (Test 100%)

€1,020.00

R88D-KN10F-ECT - Servo Drive - OMRON

R88D-KN10F-ECT

This OMRON servo drive is reference R88D-KN10F-ECT. It matches the OMRON ACCURAX G5 servo drive range. Servo drive : Input : 380-480V, 3 PH, 50/60Hz, Output : 380-480V, 3PH, 2.9A Servo drive OMRON reconditioned and tested on bench manufacturer (Test 100%)

€1,600.00

R88D-KN15F-ECT - Servo Drive - OMRON

R88D-KN15F-ECT

This OMRON servo drive is reference R88D-KN15F-ECT. It matches the OMRON ACCURAX G5 servo drive range. Servo drive : Input : 380-480V, 3 PH, 50/60Hz, Output : 380-480V, 3PH, 4.7A Servo drive OMRON reconditioned and tested on bench manufacturer (Test 100%)

€1,660.00

R88D-KN20F-ECT - Servo Drive - OMRON

R88D-KN20F-ECT

This OMRON servo drive is reference R88D-KN20F-ECT. It matches the OMRON ACCURAX G5 servo drive range. Servo drive : Input : 380-480V, 3 PH, 50/60Hz, Output : 380-480V, 3PH, 6.7A Servo drive OMRON reconditioned and tested on bench manufacturer (Test 100%)

€2,190.00

R88D-KN30F-ECT - Servo Drive - OMRON

R88D-KN30F-ECT

This OMRON servo drive is reference R88D-KN30F-ECT. It matches the OMRON ACCURAX G5 servo drive range. Servo drive : Input : 380-480V, 3 PH, 50/60Hz, Output : 380-480V, 3PH, 9.4A Servo drive OMRON reconditioned and tested on bench manufacturer (Test 100%)

€3,215.00

6AV3617-1JC00-0AX0 - Operator Panel - SIEMENS

6AV3617-1JC00-0AX0

SIEMENS operator panel reference 6AV3617-1JC00-0AX0 for Simatic S7. OPERATOR PANEL OP17 / PP BACKLIGHT LCD SCREEN BY LED 4X20 / 8X40 LINESXCARACT. SIMATIC S5, 505, NATIVE PILOTS WITHOUT UL / CSA APPROVAL This OP 6AV3617-1JC00-0AX0 is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,240.00

6AV3617-1JC00-0AX1 - Operator Panel - SIEMENS

6AV3617-1JC00-0AX1

SIEMENS operator panel reference 6AV3617-1JC00-0AX1 for Simatic S7. OP 17 / PP operator panel LCD display, LED backlight 4 x 20/8 x 40 lines x characters SIMATIC S5, 505, native drivers with UL / CSA approval This OP 6AV3617-1JC00-0AX1 is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€740.00