Catalog

Showing 1-36 of 101 item(s)

TSXDMZ64DTK - I/O Module - SCHNEIDER

TSXDMZ64DTK

This module of TELEMECANIQUE and reference TSXDMZ64DTK belongs to the range Modicon TSX Micro. Module with 64 inputs / outputs. Equipped with 4 male HE10 connectors. 32 inputs 24VDC and 32 static outputs 24VDC / 0.1A. This Telemecanique TSXDMZ64DTK module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€100.00

TSX3721001 - PLC - SCHNEIDER ELECTRIC

TSX3721001

Schneider PLC / Telemecanique reference TSX3721001. Modicon PLC Micro. TSX micro 3721 100/240 V AC base This Schneider TSX3721001 is at your disposal to replace your defective equipment and has a warranty adapted to your needs. PLC SCHNEIDER reconditioned and tested under full load (duration test) on TSX Micro Modicon bench.

€330.00

TSXDSZ08R5 - Output module - TELEMECANIQUE

TSXDSZ08R5

This TELEMECANIQUE and TSXDSZ08R5 output module belongs to the Modicon TSX Micro range. Module with 8 relay outputs. Screw connection with 15 terminals. 24VDC or 24 ... 240VAC This Telemecanique TSXDSZ08R5 output module is at your disposal to replace your defective hardware and has a warranty adapted to your needs.

€125.00

TSXDMZ28DR - Relay I/O Module base - TELEMECANIQUE

TSXDMZ28DR

This module of TELEMECANIQUE brand and reference TSXDMZ28DR belongs to the range Modicon TSX Micro. Module with 28 inputs / outputs. Screw connection with 35 terminals. 16 inputs 24VDC and 12 relay outputs. This Telemecanique module TSXDMZ28DR is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€185.00

MHDS1004N00 - Motion servo drive - SCHNEIDER ELECTRIC

MHDS1004N00

This servo drive for motion control SCHNEIDER ELECTRIC reference MHDS1004N00 is an AC servo drive for universal control. LEXIUM 17S Series LEXIUM 17S servo drive: 3x-230-480V, 50 / 60Hz. Three phase: 4.0A This servo drive MHDS1004N00 is at your disposal to replace your defective equipment and has a guarantee adapted to your needs

€1,640.00

MHDS1008N00 - Motion servo drive - SCHNEIDER ELECTRIC

MHDS1008N00

This servo drive for motion control SCHNEIDER ELECTRIC reference MHDS1008N00 is an AC servo drive for universal control. LEXIUM 17S Series LEXIUM 17S servo drive: 3x-230-480V, 50 / 60Hz. Three phase: 8.0A This servo drive MHDS1008N00 is at your disposal to replace your defective equipment and has a guarantee adapted to your needs

€870.00

MHDS1017N00 - Motion servo drive - SCHNEIDER ELECTRIC

MHDS1017N00

This servo drive for motion control SCHNEIDER ELECTRIC reference MHDS1017N00 is an AC servo drive for universal control. LEXIUM 17S Series LEXIUM 17S servo drive: 3x-230-480V, 50 / 60Hz. Three phase: 16.8A This servo drive MHDS1017N00 is at your disposal to replace your defective equipment and has a guarantee adapted to your needs

€1,120.00

MHDS1028N00 - Motion servo drive - SCHNEIDER ELECTRIC

MHDS1028N00

This servo drive for motion control SCHNEIDER ELECTRIC reference MHDS1028N00 is an AC servo drive for universal control. LEXIUM 17S Series LEXIUM 17S servo drive: 3x-230-480V, 50 / 60Hz. Three phase: 28A This servo drive MHDS1028N00 is at your disposal to replace your defective equipment and has a guarantee adapted to your needs

€1,210.00

MHDS1056N00 - Motion servo drive - SCHNEIDER ELECTRIC

MHDS1056N00

This servo drive for motion control SCHNEIDER ELECTRIC reference MHDS1056N00 is an AC servo drive for universal control. LEXIUM 17S Series LEXIUM 17S servo drive: 3x-230-480V, 50 / 60Hz. Three phase: 56A This servo drive MHDS1056N00 is at your disposal to replace your defective equipment and has a guarantee adapted to your needs

€1,380.00

BWU2702 - PROFIBUS safety module - BIHL+WIEDEMANN

BWU2702

This BIHL+WIEDEMANN brand BWU2702 gateway module is from the AS-i 3.0 PROFIBUS-Gateways range ASi-3 PROFIBUS gateway with integrated safety monitor, 2 ASi masters, 1 power supply for 2 ASi circuits, 4 discrete inputs, expandable to 62 2-channel safety inputs, 1922 2-channel safety inputs in max configuration, 4 circuits (2 x relay outputs and 2 x...

€805.00

BWU2822 - PROFIBUS safety module - BIHL+WIEDEMANN

BWU2822

This BIHL+WIEDEMANN brand BWU2822 gateway module is from the AS-i 3.0 PROFIBUS-Gateways range ASi-3 PROFIBUS gateway with integrated safety monitor, 2 ASi-3 masters, integrated decoupling, max. 4 A per ASi circuit, ASi current measurement in the gateway, 6 discrete inputs or 3 2-channel safety inputs (SIL 3, cat. 4), expandable to 62 2-channel safety...

€1,450.00

BWU2793 - PROFIBUS safety module - BIHL+WIEDEMANN

BWU2793

This BIHL+WIEDEMANN brand BWU2793 gateway module is from the AS-i 3.0 PROFIBUS-Gateways range ASi-3 PROFIBUS gateway with integrated safety monitor, 1 ASi-3 master, integrated decoupling, max. 4 A per ASi circuit, ASi current measurement in the gateway, 6 discrete inputs or 3 2-channel safety inputs (SIL 3, cat. 4), expandable to 31 2-channel safety...

€350.00

BWU2602 - PROFIBUS safety module - BIHL+WIEDEMANN

BWU2602

This BIHL+WIEDEMANN brand BWU2602 gateway module is from the AS-i 3.0 PROFIBUS-Gateways range ASi-3 PROFIBUS gateway with integrated safety monitor, 2 ASi masters, 1 power supply for 2 ASi circuits, 4 discrete inputs, expandable to 62 2-channel safety inputs, 1922 2-channel safety inputs in max configuration, 4 circuits (2 x relay outputs and 2 x...

€1,200.00

BWU2202 - PROFIBUS safety module - BIHL+WIEDEMANN

BWU2202

This BIHL+WIEDEMANN brand BWU2202 gateway module is from the AS-i 3.0 PROFIBUS-Gateways range ASi-3 PROFIBUS gateway with integrated safety monitor, 2 ASi masters, 1 power supply for 2 ASi circuits, 4 discrete inputs, expandable to 62 2-channel safety inputs, 4 enabling circuits (2 x relay outputs and 2 x signal outputs) safety outputs), expandable to 16...

€840.00

BWU2204 - PROFIBUS safety module - BIHL+WIEDEMANN

BWU2204

This BIHL+WIEDEMANN brand BWU2204 gateway module is from the AS-i 3.0 PROFIBUS-Gateways range ASi-3 PROFIBUS gateway with integrated safety monitor, 1 ASi master, 1 power supply for 2 ASi circuits, 4 discrete inputs, expandable to 62 2-channel safety inputs, 4 enabling circuits (2 x relay outputs and 2 x signal outputs) electronic safety devices),...

€650.00

BWU2206 - PROFIBUS safety module - BIHL+WIEDEMANN

BWU2206

This BIHL+WIEDEMANN brand BWU2206 gateway module is from the AS-i 3.0 PROFIBUS-Gateways range ASi-3 PROFIBUS gateway with integrated safety monitor, 1 ASi master, 1 power supply for 2 ASi circuits, expandable to 62 2-channel safety inputs, 2 enable circuits (2 x 2 relay outputs), expandable to 16 safety outputs , diagnostics and configuration via Ethernet...

€250.00

BWU3053 - PROFIBUS safety module - BIHL+WIEDEMANN

BWU3053

This BIHL+WIEDEMANN brand BWU3053 gateway module is from the AS-i 3.0 PROFIBUS-Gateways range 24 volt ASi-3 PROFIBUS gateway in stainless steel, 1 ASi-3 master, integrated decoupling, max. 4 A per ASi circuit, duplicate address detection, ASi fault check, IP20 This BIHL+WIEDEMANN brand BWU3053 module is at your disposal to replace your defective equipment.

€1,900.00

MQAF01 - PLC Module - MITSUBISHI

MQAF01

MITSUBISHI PLC reference MQAF01 . MELSEC-Q series. Master Module. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€930.00

Q61P-A1 - Power supply - MITSUBISHI

Q61P-A1

MITSUBISHI Power supply reference Q61P-A1. MELSEC-Q series. Features: 100-120VAC -> 5-24VDC This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€70.00

Q61P-A2 - Power supply - MITSUBISHI

Q61P-A2

MITSUBISHI Power supply reference Q61P-A2 . MELSEC-Q series. Features: 200-240VAC -> 5-24VDC This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€70.00

Q62P - Power supply - MITSUBISHI

Q62P

MITSUBISHI Power supply reference Q62P. MELSEC-Q series. Features: 100-240VAC -> 5-24VDC This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€140.00

Q63P - Power supply - MITSUBISHI

Q63P

MITSUBISHI Power supply reference Q63P . MELSEC-Q series. Features: 24VDC -> 5-24VDC This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€140.00

Q64P - Power supply - MITSUBISHI

Q64P

MITSUBISHI Power supply reference Q64P. MELSEC-Q series. Features: 100-240VAC -> 5-24VDC This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€80.00

Q00JCPU-E - CPU - MITSUBISHI

Q00JCPU-E

MITSUBISHI CPU reference Q00JCPU-E. MELSEC-Q series. Features: Combination of CPU module (single processor), 5 Slot Base unit and power supply This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€1,100.00

Q00CPU - CPU - MITSUBISHI

Q00CPU

MITSUBISHI CPU reference Q00CPU. MELSEC-Q series. Features: CPU multi processor. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€70.00

Q01CPU - CPU - MITSUBISHI

Q01CPU

MITSUBISHI CPU reference Q01CPU. MELSEC-Q series. Features: CPU multi processor. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€140.00

Q02CPU - CPU - MITSUBISHI

Q02CPU

MITSUBISHI CPU reference Q02CPU. MELSEC-Q series. Features: CPU multi processor. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€180.00

Q02HCPU - CPU - MITSUBISHI

Q02HCPU

MITSUBISHI CPU reference Q02HCPU. MELSEC-Q series. Features: CPU multi processor. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€160.00

Q06HCPU - CPU - MITSUBISHI

Q06HCPU

MITSUBISHI CPU reference Q06HCPU. MELSEC-Q series. Features: CPU multi processor. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€240.00

Q12HCPU - CPU - MITSUBISHI

Q12HCPU

MITSUBISHI CPU reference Q12HCPU. MELSEC-Q series. Features: CPU multi processor. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€450.00

Q25HCPU - CPU - MITSUBISHI

Q25HCPU

MITSUBISHI CPU reference Q25HCPU. MELSEC-Q series. Features: CPU multi processor. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€450.00

Q12PHCPU - CPU - MITSUBISHI

Q12PHCPU

MITSUBISHI CPU reference Q12PHCPU. MELSEC-Q series. Features: CPU multi processor. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€1,400.00

Q25PHCPU - CPU - MITSUBISHI

Q25PHCPU

MITSUBISHI CPU reference Q25PHCPU. MELSEC-Q series. Features: CPU multi processor. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€1,900.00

Q12PRHCPU - CPU - MITSUBISHI

Q12PRHCPU

MITSUBISHI CPU reference Q12PRHCPU. MELSEC-Q series. Features: Process CPU module, high availability. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€3,900.00

Q25PRHCPU - CPU - MITSUBISHI

Q25PRHCPU

MITSUBISHI CPU reference Q25PRHCPU. MELSEC-Q series. Features: Process CPU module, high availability. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€4,200.00

Q06CCPU-V-H01 - CPU - MITSUBISHI

Q06CCPU-V-H01

MITSUBISHI CPU reference Q06CCPU-V-H01. MELSEC-Q series. Features: C-Controller CPU. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€1,400.00