Catalog

Showing 1-36 of 296 item(s)

DBSC102-GAAW - Servo Controller - BALDOR

DBSC102-GAAW

This reference drive DBSC102-GAAW and brand BALDOR is a servo controller for Brushless AC motor. Input: AC230V 50/60Hz, 1PH, Output: 2A/ACO-230V, RS232 interface, binary encoder simulation, 0.87kVA. This BALDOR servo controller is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€460.00

DBSC1110-GAAW - Servo Controller - BALDOR

DBSC1110-GAAW

This reference drive DBSC1110-GAAW and brand BALDOR is a servo controller for Brushless AC motor. Input: AC230V 50/60Hz, 3PH, Output: 10A/ACO-250V, RS232 interface, binary encoder simulation. This BALDOR servo controller is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€580.00

MDH2A02TB-RB23 - Motion Controller - BALDOR

MDH2A02TB-RB23

This reference motion controller MDH2A02TB-RB23 and brand BALDOR is a controller for Brushless AC motor. MintDrive II range. Desc: 2.5A/24V/DB/Res/2CAN Input: AC230V 50/60Hz, Single Phase Output: 2.5A/ACO-230V This BALDOR motion controller is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€850.00

FPH4A02TB-RN23 - Servo drive - BALDOR

FPH4A02TB-RN23

This reference servo drive FPH4A02TB-RN23 and brand BALDOR is a servo drive for Brushless AC motor. Flex + Drive II range. Desc: F + DII-415V / 2.5A / 24V / DB / Res Input: AC400-480V 50/60Hz, Three Phase Output: 2.5A / ACO-460V This BALDOR servo drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€710.00

BSM63N-175AA - Servo Motor brushless - BALDOR

BSM63N-175AA

This reference motor BSM63N-175AA and brand BALDOR is a Brushless AC motor. N series range. TORQ CONT STALL: 0.77 NM, CUR CONT STALL / A RMS: 1,01, POWER: 0,24kW, RATED SPEED / RPM: 4000, RATED BUS VOLTS: : 10000 This BALDOR engine is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€520.00

BSM50N-275AA - Servo Motor brushless - BALDOR

BSM50N-275AA

This reference motor BSM50N-275AA and brand BALDOR is a Brushless AC motor. N series range TORQ CONT STALL: 0.91 NM, CUR CONT STALL / A RMS: 1.42, POWER: 0.18kW, RATED SPEED / RPM: 2000, RATED BUS VOLTS: MECH SPEED: 10000 This BALDOR motor is at your disposal to replace your equipment and has a guarantee adapted to your needs

€580.00

BSM63N-275BA - Servo Motor brushless - BALDOR

BSM63N-275BA

This reference motor BSM63N-275BA and brand BALDOR is a Brushless AC motor. N series range TORQ CONT STALL: 1,47 NM, CUR CONT STALL / A RMS: 1,94, POWER: 0,53kW, RATED SPEED / RPM: 4000, RATED BUS VOLTS: MECH SPEED: 10000 This BALDOR engine is at your disposal to replace your equipment and has a guarantee adapted to your needs

€620.00

SBSC1115 - Servo Controller - BALDOR

SBSC1115

This SBSC1115 brushless reference and brand BALDOR is a drive for Brushless AC motor. SBSC 1000/1100 Series Input: 3AC 230V 50 / 60Hz, 3PH, Output: 15A / ACO-250V, RS232 Interface, Binary Encoder Simulation. This BALDOR drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€720.00

SP4402 - Inverter Drive - CONTROL TECHNIQUES

SP4402

This SP4402 reference and CONTROL TECHNIQUES brand is a drive of the UNIDRIVE SP range. SP4402 : 380V three-phase network at 480V, 37-45kW, 74A. This CONTROL TECHNIQUES drive is at your disposal to replace your defective equipment and has a suitable guarantee. Drive tested on engine test bench.

€7,400.00

FD2A02TR-RN20 - Servo Drive - BALDOR

FD2A02TR-RN20

This reference servo drive FD2A02TR-RN20 and brand BALDOR is a Brushless motor drive. FLEXDRIVE range. Rated voltage: 230V, output current: 2.5A, 10A input circuit breaker This BALDOR drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€860.00

SBSC1102 - Servo Controller - BALDOR

SBSC1102

This SBSC1102 brushless reference and BALDOR brand is a Brushless AC motor drive. SBSC 1000/1100 Series Input: AC230V 50 / 60Hz, 3PH, Output: 2A / ACO-250V, RS232 Interface, Binary Encoder Simulation. This BALDOR drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,170.00

SBSC1105 - Servo Controller - BALDOR

SBSC1105

This SBSC1105 brushless reference and BALDOR brand is a Brushless AC motor drive. SBSC 1000/1100 Series Input: AC230V 50 / 60Hz, 3PH, Output: 5A / ACO-250V, RS232 Interface, Binary Encoder Simulation. This BALDOR drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€3,345.00

BSC1010 - Servo Controller - BALDOR

BSC1010

This brushless reference drive BSC1010 and BALDOR brand is a drive for Brushless AC motor. BSC 1000/1100 Series Input: DC320V Output: 10A / ACO-250V This BALDOR drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,240.00

BSM90N-175AA - Servo Motor brushless - BALDOR

BSM90N-175AA

This reference motor BSM90N-175AA and brand BALDOR is a Brushless motor AC.Gamme C series TORQ CONT STALL: 6 NM, CUR CONT STALL / AT RMS: 8.07, POWER: 0.53kW, RATED SPEED / RPM: 4000, RATED BUS VOLTS: 300, PEAK CUR / AT RMS: 29.05, MAX MECH SPEED 6000 This BALDOR Engine is at your disposal to replace your equipment and has a guarantee adapted to your needs

€1,060.00

UD52 - SIN-COS Option Module - CONTROL TECHNIQUES

UD52

This UD52 CONTROL TECHNIQUES option module is a SIN-COS encoding interface for the UNIDRIVE range. The UD52 operates with encoders having 256, 512, 1024, 2048 or 4096 lines per revolution and has an operating frequency of 102.4 kHz. This option module is at your disposal in standard supply or exchange to replace your defective equipment and has a warranty.

€920.00

SP4401 - Inverter Drive - CONTROL TECHNIQUES

SP4401

This SP4402 reference and CONTROL TECHNIQUES brand is a drive of the UNIDRIVE SP range. SP4402 : 380V three-phase network at 480V, 30-37kW, 68A. This CONTROL TECHNIQUES drive is at your disposal to replace your defective equipment and has a suitable guarantee. Drive tested on engine test bench.

€5,510.00

SP4403 - Inverter Drive - CONTROL TECHNIQUES

SP4403

This SP4403 reference and CONTROL TECHNIQUES brand is a drive of the UNIDRIVE SP range. SP4403 : 380V three-phase network at 480V, 45-55kW, 96/104A. This CONTROL TECHNIQUES drive is at your disposal to replace your defective equipment and has a suitable guarantee. Drive tested on engine test bench.

€3,280.00

UNI 2402 - Synchron Controller - CONTROL TECHNIQUES

UNI 2402

This reference CONTROL TECHNIQUES speed controller UNI 2402 is a drive for asynchronous and synchronous motor. Inverter 7,5 kW, 16 A, 380-480V This UNI 2402 speed controller is at your disposal to replace defective equipment and has a guarantee adapted to your needs. Speed controller reconditioned and tested in full load (test of duration) on CONTROL...

€1,470.00

BSC1115-24 - Servo Controller - BALDOR

BSC1115-24

This brushless reference drive BSC1115-24 and BALDOR brand is a drive for Brushless AC motor. BSC 1000/1100 Series Input: AC230V, 50/60Hz, Three phase Output: 15A / ACO-250V This BALDOR drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€3,210.00

UD78 - Servo option module - CONTROL TECHNIQUES

UD78

This servo option module CONTROL TECHNIQUES reference UD78 is an interface for the UNIDRIVE range. The UD78 can only be used with disks equipped with version 3 (or later) software. (The 0.50 parameter indicates the software version.) This option module CONTROL TECHNIQUES is at your disposal in supply to replace your defective equipment and has a guarantee.

€1,820.00

UD53 - Resolver interface option module - CONTROL TECHNIQUES

UD53

This UD53 CONTROL TECHNIQUES option module is a resolver module interface for the UNIDRIVE range. The optional small module UD53 Resolver is an interface module to be installed in a Unidrive. This option module UD53 is available to you in standard supply or exchange to replace your defective equipment and has a warranty

€1,120.00

UNI 2401 - Synchron Controller - CONTROL TECHNIQUES

UNI 2401

This reference CONTROL TECHNIQUES speed controller UNI 2401 is a drive for asynchronous and synchronous motor. Inverter 5,5 kW, 12 A, 380-480V This UNI 2401 speed controller is at your disposal to replace defective equipment and has a guarantee adapted to your needs. Speed controller reconditioned and tested in full load (test of duration) on CONTROL...

€1,015.00

UNI 2403 - Synchron Controller - CONTROL TECHNIQUES

UNI 2403

This reference CONTROL TECHNIQUES speed controller UNI 2403 is a drive for asynchronous and synchronous motor. Inverter 11 kW, 25 A, 380-480V This UNI 2403 speed controller is at your disposal to replace defective equipment and has a guarantee adapted to your needs. Speed controller reconditioned and tested in full load (test of duration) on CONTROL...

€1,685.00

UNI 3401 - Synchron Controller - CONTROL TECHNIQUES

UNI 3401

This reference CONTROL TECHNIQUES speed controller UNI 3401 is a drive for asynchronous and synchronous motor. Inverter 15 kW, 34 A, 380-480V This UNI 3401 speed controller is at your disposal to replace defective equipment and has a guarantee adapted to your needs. Speed controller reconditioned and tested in full load (test of duration) on CONTROL...

€3,330.00

UNI 3402 - Synchron Controller - CONTROL TECHNIQUES

UNI 3402

This reference CONTROL TECHNIQUES speed controller UNI 3402 is a drive for asynchronous and synchronous motor. Inverter 18.5 kW, 40 A, 380-480V This UNI 3402 speed controller is at your disposal to replace defective equipment and has a guarantee adapted to your needs. Speed controller reconditioned and tested in full load (test of duration) on CONTROL...

€3,920.00

UNI 3403 - Synchron Controller - CONTROL TECHNIQUES

UNI 3403

This reference CONTROL TECHNIQUES speed controller UNI 3403 is a drive for asynchronous and synchronous motor. Inverter 22 kW, 46 A, 380-480V This UNI 3403 speed controller is at your disposal to replace defective equipment and has a guarantee adapted to your needs. Speed controller reconditioned and tested in full load (test of duration) on CONTROL...

€3,370.00

UNI 3404 - Synchron Controller - CONTROL TECHNIQUES

UNI 3404

This reference CONTROL TECHNIQUES speed controller UNI 3404 is a drive for asynchronous and synchronous motor. Inverter 30 kW, 60A, 380-480V This UNI 3404 speed controller is at your disposal to replace defective equipment and has a guarantee adapted to your needs. Speed controller reconditioned and tested in full load (test of duration) on CONTROL...

€3,900.00

UNI 3405 - Synchron Controller - CONTROL TECHNIQUES

UNI 3405

This reference CONTROL TECHNIQUES speed controller UNI 3405 is a drive for asynchronous and synchronous motor. Inverter 37 kW, 70A, 380-480V This UNI 3405 speed controller is at your disposal to replace defective equipment and has a guarantee adapted to your needs. Speed controller reconditioned and tested in full load (test of duration) on CONTROL...

€6,840.00

UNI 2201 - Synchron Controller - CONTROL TECHNIQUES

UNI 2201

This reference CONTROL TECHNIQUES speed controller UNI 2201 is a drive for asynchronous and synchronous motor. Inverter 3 kW, 12A, 200-240V This UNI 2201 speed controller is at your disposal to replace defective equipment and has a guarantee adapted to your needs. Speed controller reconditioned and tested in full load (test of duration) on CONTROL...

€1,600.00

UNI 2202 - Synchron Controller - CONTROL TECHNIQUES

UNI 2202

This reference CONTROL TECHNIQUES speed controller UNI 2202 is a drive for asynchronous and synchronous motor. Inverter 4 kW, 16A, 200-240V This UNI 2202 speed controller is at your disposal to replace defective equipment and has a guarantee adapted to your needs. Speed controller reconditioned and tested in full load (test of duration) on CONTROL...

€1,800.00

UNI 2203 - Synchron Controller - CONTROL TECHNIQUES

UNI 2203

This reference CONTROL TECHNIQUES speed controller UNI 2203 is a drive for asynchronous and synchronous motor. Inverter 5.5 kW, 25A, 200-240V This UNI 2203 speed controller is at your disposal to replace defective equipment and has a guarantee adapted to your needs. Speed controller reconditioned and tested in full load (test of duration) on CONTROL...

€2,000.00

UNI 3201 - Synchron Controller - CONTROL TECHNIQUES

UNI 3201

This reference CONTROL TECHNIQUES speed controller UNI 3201 is a drive for asynchronous and synchronous motor. Inverter 7.5 kW, 34 A, 200-240V This UNI 3201 speed controller is at your disposal to replace defective equipment and has a guarantee adapted to your needs. Speed controller reconditioned and tested in full load (test of duration) on CONTROL...

€2,300.00

UNI 3202 - Synchron Controller - CONTROL TECHNIQUES

UNI 3202

This reference CONTROL TECHNIQUES speed controller UNI 3202 is a drive for asynchronous and synchronous motor. Inverter 11 kW, 46A, 200-240V This UNI 3202 speed controller is at your disposal to replace defective equipment and has a guarantee adapted to your needs. Speed controller reconditioned and tested in full load (test of duration) on CONTROL...

€2,700.00

UNI 3203 - Synchron Controller - CONTROL TECHNIQUES

UNI 3203

This reference CONTROL TECHNIQUES speed controller UNI 3203 is a drive for asynchronous and synchronous motor. Inverter 15 kW, 60A, 200-240V This UNI 3203 speed controller is at your disposal to replace defective equipment and has a guarantee adapted to your needs. Speed controller reconditioned and tested in full load (test of duration) on CONTROL...

€3,000.00

UNI 3204 - Synchron Controller - CONTROL TECHNIQUES

UNI 3204

This reference CONTROL TECHNIQUES speed controller UNI 3204 is a drive for asynchronous and synchronous motor. Inverter 22 kW, 74A, 200-240V This UNI 3204 speed controller is at your disposal to replace defective equipment and has a guarantee adapted to your needs. Speed controller reconditioned and tested in full load (test of duration) on CONTROL...

€4,800.00

UNI 1401 - Synchron Controller - CONTROL TECHNIQUES

UNI 1401

This reference CONTROL TECHNIQUES speed controller UNI 1401 is a drive for asynchronous and synchronous motor. Inverter 0.75 kW, 2.1 A, 380-480V This UNI 1401 speed controller is at your disposal to replace defective equipment and has a guarantee adapted to your needs. Speed controller reconditioned and tested in full load (test of duration) on CONTROL...

€550.00